GAMMU-DETECT(1) | Gammu | GAMMU-DETECT(1) |
gammu-detect - Gammu device detection
New in version 1.28.95.
gammu-detect [OPTIONS]
Script to detect available devices, which might be suitable for gammu.
NOTE:
Currently it supports following devices:
NOTE:
This program follows the usual GNU command line syntax, with long options starting with two dashes (--). A summary of options is included below.
The output of gammu-detect is configuration file for Gammu (see gammurc) with configuration section for every device which might be used with gammu.
NOTE:
When invoked as gammu-detect -d, also all examined devices are listed as comments in the output.
; Configuration file generated by gammu-detect. ; Please check The Gammu Manual for more information. [gammu] device = /dev/ttyACM0 name = Nokia E52 connection = at [gammu1] device = /dev/ttyACM1 name = Nokia E52 connection = at [gammu2] device = /dev/ttyS0 name = Phone on serial port 0 connection = at [gammu3] device = /dev/ttyS1 name = Phone on serial port 1 connection = at [gammu4] device = /dev/ttyS2 name = Phone on serial port 2 connection = at [gammu5] device = /dev/ttyS3 name = Phone on serial port 3 connection = at [gammu6] device = 5C:57:C8:BB:BB:BB name = Nokia E52 connection = bluephonet
Michal Čihař <michal@cihar.com>
2009-2015, Michal Čihař <michal@cihar.com>
January 28, 2019 | 1.40.0 |