Supported strings: default hw:0,0 hw:0,1 hw:0,2 hw:0,3

Default: default

Card

channel_mode=<string>

Supported strings: mono stereo

Default: stereo

Channel Mode

bits=<string>

Supported strings: 8 16

Default: 16

Bits

samplerate=<number> (8000..96000, default: 44100)

Samplerate [Hz]

buffer_time=<number> (10..10000, default: 1000)

Buffer time

Set the buffer time (in milliseconds). Larger values improve recording performance on slow systems under load.

user_device=<string>

User device

Enter a custom device to use for recording. Leave empty to use the settings above

Device

channel_mode=<string>

Supported strings: Mono Stereo

Default: Stereo

Channel Mode

bits=<string>

Supported strings: 8 16

Default: 16

Bits

samplerate=<number> (8000..96000, default: 44100)

Samplerate [Hz]

Host (empty: local)

input_mode=<string>

Supported strings: record monitor

Default: record

Input Mode

Supported strings: mono stereo

Default: stereo

Channel Mode

bits=<string>

Supported strings: 8 16

Default: 16

Bits

samplerate=<number> (8000..96000, default: 44100)

Samplerate [Hz]

server=<string>

Server

Server to connect to. Leave empty for default.

dev=<string>

Source

Source to open. Use the PulseAudio manager for available Sources.

Supported strings: mono stereo

Default: stereo

Channel Mode

samplerate=<number> (8000..96000, default: 44100)

Samplerate [Hz]

album=<string>

Album

shuffle=[1|0] (default: 0)

Shuffle

V4L Device

resolution=<string>

Supported strings: QSIF (160x112) QCIF (176x144) QVGA (320x240) SIF(352x240) CIF (352x288) VGA (640x480) User defined

Default: QVGA (320x240)

Resolution

user_width=<number> (160..1024, default: 720)

User defined width

user_height=<number> (112..768, default: 576)

User defined height

brightness=<number> (0..65535, default: 40000)

Brightness

hue=<number> (0..65535, default: 65535)

Hue

colour=<number> (0..65535, default: 30000)

Colour

contrast=<number> (0..65535, default: 30000)

Contrast

whiteness=<number> (0..65535, default: 30000)

Whiteness

Supported options: /dev/video0

Default: /dev/video0

V4L2 Device

force_rw=[1|0] (default: 1)

Force read

Don't use memory mapping

resolution=<string>

Supported strings: QSIF (160x112) QCIF (176x144) QVGA (320x240) SIF(352x240) CIF (352x288) VGA (640x480) User defined

Default: QVGA (320x240)

Resolution

user_width=<number> (160..1024, default: 720)

User defined width

user_height=<number> (112..768, default: 576)

User defined height

Grab from root window

draw_cursor=[1|0] (default: 1)

Draw cursor

win_ontop=[1|0] (default: 1)

Keep grab window on top

win_sticky=[1|0] (default: 1)

Make grab window sticky

disable_screensaver=[1|0] (default: 1)

Disable screensaver

Disable screensaver and energy saving mode

Cutoff Frequency

Resonanz=<number> (0.000..4.000, default: 0.000)

Resonanz

Frequency 1

Feedback1=<number> (-1.000..1.000, default: 5000.750)

Feedback 1

Frequency2=<number> (1.000..20000.000, default: 10000.500)

Frequency 2

Feedback2=<number> (-1.000..1.000, default: 10000.500)

Feedback 2

Frequency3=<number> (1.000..20000.000, default: 15000.250)

Frequency 3

Feedback3=<number> (-1.000..1.000, default: 15000.250)

Feedback 3

Frequency4=<number> (1.000..20000.000, default: 20000.000)

Frequency 4

Feedback4=<number> (-1.000..1.000, default: 20000.000)

Feedback 4

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Trigger Threshold

Einschwingzeit(s)=<number> (default: 0.000)

Einschwingzeit (s)

Abklingzeit(s)=<number> (default: 0.000)

Abklingzeit (s)

Haltewert=<number> (0.000..1.000, default: 1.000)

Haltewert

Ausklingzeit(s)=<number> (default: 0.000)

Ausklingzeit (s)

Pitch shift

Buffersize=<number> (1..7, default: 4)

Buffer size

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Aliasing level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Verstärkung (dB)

Gain

Gain

Delay (ms)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Denominator

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Attack time (s)

Decaytime(s)=<number> (0.000..1.000, default: 0.250)

Decay time (s)

Modulationdepth=<number> (0.000..1.000, default: 0.250)

Modulation depth

Feedback=<number> (-1.000..1.000, default: 0.250)

Feedback

Spread(octaves)=<number> (0.000..2.000, default: 0.250)

Spread (octaves)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Slope

Frequenz

Pulse Width

Frequenz

Decay time (samples)

Kneepoint(dB)=<number> (-90.000..0.000, default: 30.000)

Knee point (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Left to Right Time (Seconds)

LefttoRightFeedback(Percent)=<number> (-1.000..1.000, default: 0.000)

Left to Right Feedback (Percent)

RighttoLeftTime(Seconds)=<number> (0.010..0.990, default: 0.000)

Right to Left Time (Seconds)

RighttoLeftFeedback(Percent)=<number> (-1.000..1.000, default: 0.000)

Right to Left Feedback (Percent)

Low-PassCutoff(Hz)=<number> (1.000..5000.000, default: 0.000)

Low-Pass Cutoff (Hz)

Distortion

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Frequency

Frequenz

PulseWidth=<number> (0.000..1.000, default: 0.500)

Pulse Width

Band separation (Hz)

Feedback=<number> (-0.990..0.990, default: 172.000)

Feedback

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

DecayTime(s)=<number> (default: 0.000)

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Signal amplitude

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Crossover amplitude

Smoothing=<number> (0.000..1.000, default: 1.000)

Smoothing

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Lo gain (dB)

Midgain(dB)=<number> (-70.000..6.000, default: 0.000)

Mid gain (dB)

Higain(dB)=<number> (-70.000..6.000, default: 0.000)

Hi gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Lo gain (dB)

Midgain(dB)=<number> (-70.000..6.000, default: 0.000)

Mid gain (dB)

Higain(dB)=<number> (-70.000..6.000, default: 0.000)

Hi gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

LFO sync

LFOperiod(s)=<number> (0.100..32.000, default: 0.000)

LFO period (s)

LFOdepth(ms)=<number> (1.000..5.000, default: 4.000)

LFO depth (ms)

Feedback(%)=<number> (-100.000..100.000, default: 4.000)

Feedback (%)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Bit depth

Samplerate(Hz)=<number> (0.001..1.000, default: 1.000)

Sample rate (Hz)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Random seed

Inputgain(dB)=<number> (-96.000..24.000, default: 0.000)

Input gain (dB)

Feedback(%)=<number> (0.000..100.000, default: 0.000)

Feedback (%)

Numberoftaps=<number> (2..128, default: 2)

Number of taps

Firstdelay(s)=<number> (0.000..5.000, default: 2.000)

First delay (s)

Delayrange(s)=<number> (0.000..6.000, default: 6.000)

Delay range (s)

Delaychange=<number> (0.200..5.000, default: 6.000)

Delay change

Delayrandom(%)=<number> (0.000..100.000, default: 6.000)

Delay random (%)

Amplitudechange=<number> (0.200..5.000, default: 6.000)

Amplitude change

Amplituderandom(%)=<number> (0.000..100.000, default: 6.000)

Amplitude random (%)

Dry/wetmix=<number> (0.000..1.000, default: 6.000)

Dry/wet mix

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Mode (0 for none, 1 for half wave, 2 for full wave)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Probability

Multiplier=<number> (-1.000..1.000, default: 0.000)

Multiplier

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Peak limit (dB)

Releasetime(s)=<number> (0.000..1.000, default: 0.250)

Release time (s)

Fastcompressionratio=<number> (0.000..1.000, default: 0.500)

Fast compression ratio

Compressionratio=<number> (0.000..1.000, default: 0.500)

Compression ratio

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Decay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Waveform (1=sin, 2=tri, 3=squ, 4=saw)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Input gain (dB)

Limit(dB)=<number> (-20.000..0.000, default: 0.000)

Limit (dB)

Releasetime(s)=<number> (0.010..2.000, default: 0.507)

Release time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Drive level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Feedback=<number> (-1.000..1.000, default: 0.500)

Feedback

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Feedback=<number> (-1.000..1.000, default: 0.500)

Feedback

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Feedback=<number> (-1.000..1.000, default: 0.500)

Feedback

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Feedback=<number> (-1.000..1.000, default: 0.500)

Feedback

Delay (Seconds)

Dry/WetBalance=<number> (0.000..1.000, default: 0.500)

Dry/Wet Balance

Feedback=<number> (-1.000..1.000, default: 0.500)

Feedback

Delay base (ms)

Maxslowdown(ms)=<number> (0.000..10.000, default: 2.500)

Max slowdown (ms)

LFOfrequency(Hz)=<number> (0.050..100.000, default: 0.334)

LFO frequency (Hz)

Feedback=<number> (-1.000..1.000, default: 0.334)

Feedback

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Drive

Skew=<number> (0.000..1.000, default: 0.000)

Skew

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Supported strings: Unsigned 8 bit Signed 8 bit Unsigned 16 bit Signed 16 bit Signed 32 bit Floating point Double precision

Default: YUV 420 Planar

Sampleformat

Delay (seconds)

Feedback(dB)=<number> (-70.000..0.000, default: 0.000)

Feedback (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Freeze Mode

RoomSize=<number> (0.000..1.000, default: 0.500)

Room Size

Damping=<number> (0.000..1.000, default: 0.000)

Damping

WetLevel=<number> (0.000..1.000, default: 0.000)

Wet Level

DryLevel=<number> (0.000..1.000, default: 1.000)

Dry Level

Width=<number> (0.000..1.000, default: 0.500)

Width

Tracking speed

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Modulation (Octaves)

Frequenz (Hz)

Cutoff Frequency (Hz)

Resonance=<number> (0.100..1.410, default: 0.755)

Resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Cutoff Frequency (Hz)

Resonance=<number> (0.100..1.410, default: 0.755)

Resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Dry/wet mix

Numberofpasses=<number> (0..10, default: 0)

Number of passes

Errorrate(bits/block)=<number> (0.000..30.000, default: 0.000)

Error rate (bits/block)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

LF key filter (Hz)

HFkeyfilter(Hz)=<number> (0.005..0.490, default: 0.490)

HF key filter (Hz)

Threshold(dB)=<number> (-70.000..20.000, default: -70.000)

Threshold (dB)

Attack(ms)=<number> (0.010..1000.000, default: 250.008)

Attack (ms)

Hold(ms)=<number> (2.000..2000.000, default: 1500.500)

Hold (ms)

Decay(ms)=<number> (2.000..4000.000, default: 2001.000)

Decay (ms)

Range(dB)=<number> (-90.000..0.000, default: -90.000)

Range (dB)

Outputselect(-1=keylisten,0=gate,1=bypass)=<number> (-1..1, default: -90)

Output select (-1 = key listen, 0 = gate, 1 = bypass)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Double delay

LFOfrequency1(Hz)=<number> (0.000..30.000, default: 0.000)

LFO frequency 1 (Hz)

Delay1range(s)=<number> (0.000..10.500, default: 2.625)

Delay 1 range (s)

LFOfrequency2(Hz)=<number> (0.000..30.000, default: 2.625)

LFO frequency 2 (Hz)

Delay2range(s)=<number> (0.000..10.500, default: 2.625)

Delay 2 range (s)

Feedback=<number> (-100.000..100.000, default: 2.625)

Feedback

Dry/Wetlevel=<number> (0.000..1.000, default: 2.625)

Dry/Wet level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Center Frequency (Hz)

Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)

Bandwidth (Hz)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Center Frequency (Hz)

Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)

Bandwidth (Hz)

Stages(2polesperstage)=<number> (1..10, default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Cutoff Frequency

Stages(2polesperstage)=<number> (1..10, default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Cutoff Frequency

Stages(2polesperstage)=<number> (1..10, default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Impulse gain (dB)

Strikegain(dB)=<number> (-70.000..0.000, default: 0.000)

Strike gain (dB)

Strikeduration(s)=<number> (0.001..0.200, default: 0.101)

Strike duration (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Inner damping

Outerdamping=<number> (0.000..1.000, default: 0.500)

Outer damping

Micposition=<number> (0.000..1.000, default: 0.250)

Mic position

Innersize1=<number> (0.000..1.000, default: 0.500)

Inner size 1

Innerstiffness1+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 1 +

Innerstiffness1-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 1 -

Innersize2=<number> (0.000..1.000, default: 0.500)

Inner size 2

Innerstiffness2+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 2 +

Innerstiffness2-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 2 -

Innersize3=<number> (0.000..1.000, default: 0.500)

Inner size 3

Innerstiffness3+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 3 +

Innerstiffness3-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 3 -

Innersize4=<number> (0.000..1.000, default: 0.500)

Inner size 4

Innerstiffness4+=<number> (0.000..1.000, default: 0.500)

Inner stiffness 4 +

Innerstiffness4-=<number> (0.000..1.000, default: 0.500)

Inner stiffness 4 -

Outersize1=<number> (0.000..1.000, default: 0.500)

Outer size 1

Outerstiffness1+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 1 +

Outerstiffness1-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 1 -

Outersize2=<number> (0.000..1.000, default: 0.500)

Outer size 2

Outerstiffness2+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 2 +

Outerstiffness2-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 2 -

Outersize3=<number> (0.000..1.000, default: 0.500)

Outer size 3

Outerstiffness3+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 3 +

Outerstiffness3-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 3 -

Outersize4=<number> (0.000..1.000, default: 0.500)

Outer size 4

Outerstiffness4+=<number> (0.000..1.000, default: 0.500)

Outer stiffness 4 +

Outerstiffness4-=<number> (0.000..1.000, default: 0.500)

Outer stiffness 4 -

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Density (Grains/s)

Scatter(s)=<number> (0.000..5.000, default: 2.500)

Scatter (s)

GrainLength(s)=<number> (default: 0.200)

Grain Length (s)

GrainAttack(s)=<number> (default: 0.050)

Grain Attack (s)

Threshold

dB limit

Wetlevel=<number> (0.000..1.000, default: 0.000)

Wet level

Residuelevel=<number> (0.000..1.000, default: 0.000)

Residue level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Fundamental magnitude

2ndharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

2nd harmonic magnitude

3rdharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

3rd harmonic magnitude

4thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

4th harmonic magnitude

5thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

5th harmonic magnitude

6thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

6th harmonic magnitude

7thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

7th harmonic magnitude

8thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

8th harmonic magnitude

9thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

9th harmonic magnitude

10thharmonicmagnitude=<number> (-1.000..1.000, default: 0.000)

10th harmonic magnitude

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

LFO1 freq (Hz)

LFO1wave(0=sin,1=tri,2=saw,3=squ,4=s&h)=<number> (0..4, default: 250)

LFO1 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = s&h)

LFO2freq(Hz)=<number> (0.000..1000.000, default: 250.000)

LFO2 freq (Hz)

LFO2wave(0=sin,1=tri,2=saw,3=squ,4=s&h)=<number> (0..4, default: 250)

LFO2 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = s&h)

Osc1freq(Hz)=<number> (0.000..4000.000, default: 440.000)

Osc1 freq (Hz)

Osc1wave(0=sin,1=tri,2=saw,3=squ,4=noise)=<number> (0..4, default: 440)

Osc1 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = noise)

Osc2freq(Hz)=<number> (0.000..4000.000, default: 440.000)

Osc2 freq (Hz)

Osc2wave(0=sin,1=tri,2=saw,3=squ,4=noise)=<number> (0..4, default: 440)

Osc2 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = noise)

Ringmod1depth(0=none,1=AM,2=RM)=<number> (0.000..2.000, default: 440.000)

Ringmod 1 depth (0=none, 1=AM, 2=RM)

Ringmod2depth(0=none,1=AM,2=RM)=<number> (0.000..2.000, default: 440.000)

Ringmod 2 depth (0=none, 1=AM, 2=RM)

Ringmod3depth(0=none,1=AM,2=RM)=<number> (0.000..2.000, default: 440.000)

Ringmod 3 depth (0=none, 1=AM, 2=RM)

Osc1gain(dB)=<number> (-70.000..20.000, default: -70.000)

Osc1 gain (dB)

RM1gain(dB)=<number> (-70.000..20.000, default: -70.000)

RM1 gain (dB)

Osc2gain(dB)=<number> (-70.000..20.000, default: -70.000)

Osc2 gain (dB)

RM2gain(dB)=<number> (-70.000..20.000, default: -70.000)

RM2 gain (dB)

Inputgain(dB)=<number> (-70.000..20.000, default: -70.000)

Input gain (dB)

RM3gain(dB)=<number> (-70.000..20.000, default: -70.000)

RM3 gain (dB)

Xoverlowerfreq=<number> (50.000..6000.000, default: 1537.500)

Xover lower freq

Xoverupperfreq=<number> (1000.000..10000.000, default: 7750.000)

Xover upper freq

Dist1drive=<number> (0.000..3.000, default: 7750.000)

Dist1 drive

Dist2drive=<number> (0.000..3.000, default: 7750.000)

Dist2 drive

Dist3drive=<number> (0.000..3.000, default: 7750.000)

Dist3 drive

Filt1type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number> (0..5, default: 7750)

Filt1 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filt1freq=<number> (0.000..8000.000, default: 440.000)

Filt1 freq

Filt1q=<number> (0.000..1.000, default: 440.000)

Filt1 q

Filt1resonance=<number> (0.000..1.000, default: 440.000)

Filt1 resonance

Filt1LFO1level=<number> (-500.000..500.000, default: 440.000)

Filt1 LFO1 level

Filt1LFO2level=<number> (-500.000..500.000, default: 440.000)

Filt1 LFO2 level

Filt2type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number> (0..5, default: 440)

Filt2 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filt2freq=<number> (0.000..8000.000, default: 440.000)

Filt2 freq

Filt2q=<number> (0.000..1.000, default: 440.000)

Filt2 q

Filt2resonance=<number> (0.000..1.000, default: 440.000)

Filt2 resonance

Filt2LFO1level=<number> (-500.000..500.000, default: 440.000)

Filt2 LFO1 level

Filt2LFO2level=<number> (-500.000..500.000, default: 440.000)

Filt2 LFO2 level

Filt3type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number> (0..5, default: 440)

Filt3 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filt3freq=<number> (0.000..8000.000, default: 440.000)

Filt3 freq

Filt3q=<number> (0.000..1.000, default: 440.000)

Filt3 q

Filt3resonance=<number> (0.000..1.000, default: 440.000)

Filt3 resonance

Filt3LFO1level=<number> (-500.000..500.000, default: 440.000)

Filt3 LFO1 level

Filt3LFO2level=<number> (-500.000..500.000, default: 440.000)

Filt3 LFO2 level

Delay1length(s)=<number> (0.000..2.000, default: 440.000)

Delay1 length (s)

Delay1feedback=<number> (0.000..1.000, default: 440.000)

Delay1 feedback

Delay1wetness=<number> (0.000..1.000, default: 440.000)

Delay1 wetness

Delay2length(s)=<number> (0.000..2.000, default: 440.000)

Delay2 length (s)

Delay2feedback=<number> (0.000..1.000, default: 440.000)

Delay2 feedback

Delay2wetness=<number> (0.000..1.000, default: 440.000)

Delay2 wetness

Delay3length(s)=<number> (0.000..2.000, default: 440.000)

Delay3 length (s)

Delay3feedback=<number> (0.000..1.000, default: 440.000)

Delay3 feedback

Delay3wetness=<number> (0.000..1.000, default: 440.000)

Delay3 wetness

Band1gain(dB)=<number> (-70.000..20.000, default: 440.000)

Band 1 gain (dB)

Band2gain(dB)=<number> (-70.000..20.000, default: 440.000)

Band 2 gain (dB)

Band3gain(dB)=<number> (-70.000..20.000, default: 440.000)

Band 3 gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Cutoff Frequency (Hz)

Pitch co-efficient

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Impulse ID

Highlatencymode=<number> (0..1, default: 0)

High latency mode

Gain(dB)=<number> (-90.000..24.000, default: 0.000)

Gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Vocal volume (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

L delay (ms)

Llevel=<number> (0.000..50.000, default: 25.000)

L level

Cdelay(ms)=<number> (0.000..2700.000, default: 675.000)

C delay (ms)

Clevel=<number> (0.000..50.000, default: 25.000)

C level

Rdelay(ms)=<number> (0.000..2700.000, default: 675.000)

R delay (ms)

Rlevel=<number> (0.000..50.000, default: 25.000)

R level

Feedback=<number> (-100.000..100.000, default: 25.000)

Feedback

Highdamp(%)=<number> (0.000..100.000, default: 50.000)

High damp (%)

Lowdamp(%)=<number> (0.000..100.000, default: 50.000)

Low damp (%)

Spread=<number> (0.000..50.000, default: 25.000)

Spread

Dry/Wetlevel=<number> (0.000..1.000, default: 25.000)

Dry/Wet level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

LFO rate (Hz)

LFOdepth=<number> (0.000..1.000, default: 0.250)

LFO depth

Feedback=<number> (-1.000..1.000, default: 0.250)

Feedback

Spread(octaves)=<number> (0.000..2.000, default: 1.000)

Spread (octaves)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Filter type (0=LP, 1=BP, 2=HP)

Cutofffrequency(Hz)=<number> (0.002..0.500, default: 0.032)

Cutoff frequency (Hz)

Resonance=<number> (0.000..1.000, default: 0.032)

Resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Crackling (%)

PowersupplyOverloading(%)=<number> (0.000..100.000, default: 0.000)

Powersupply Overloading (%)

OpampBandwidthLimiting(Hz)=<number> (1.000..10000.000, default: 0.000)

Opamp Bandwidth Limiting (Hz)

Cutoff Frequency (Hz)

Center Frequency (Hz)

Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)

Bandwidth (Hz)

Stages(2polesperstage)=<number> (1..10, default: 0)

Stages(2 poles per stage)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Width

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Width

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

50Hz gain (low shelving)

100Hzgain=<number> (-70.000..30.000, default: 0.000)

100Hz gain

156Hzgain=<number> (-70.000..30.000, default: 0.000)

156Hz gain

220Hzgain=<number> (-70.000..30.000, default: 0.000)

220Hz gain

311Hzgain=<number> (-70.000..30.000, default: 0.000)

311Hz gain

440Hzgain=<number> (-70.000..30.000, default: 0.000)

440Hz gain

622Hzgain=<number> (-70.000..30.000, default: 0.000)

622Hz gain

880Hzgain=<number> (-70.000..30.000, default: 0.000)

880Hz gain

1250Hzgain=<number> (-70.000..30.000, default: 0.000)

1250Hz gain

1750Hzgain=<number> (-70.000..30.000, default: 0.000)

1750Hz gain

2500Hzgain=<number> (-70.000..30.000, default: 0.000)

2500Hz gain

3500Hzgain=<number> (-70.000..30.000, default: 0.000)

3500Hz gain

5000Hzgain=<number> (-70.000..30.000, default: 0.000)

5000Hz gain

10000Hzgain=<number> (-70.000..30.000, default: 0.000)

10000Hz gain

20000Hzgain=<number> (-70.000..30.000, default: 0.000)

20000Hz gain

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Number of voices

Delaybase(ms)=<number> (10.000..40.000, default: 10.000)

Delay base (ms)

Voiceseparation(ms)=<number> (0.000..2.000, default: 0.500)

Voice separation (ms)

Detune(%)=<number> (0.000..5.000, default: 0.500)

Detune (%)

LFOfrequency(Hz)=<number> (2.000..30.000, default: 9.000)

LFO frequency (Hz)

Outputattenuation(dB)=<number> (-20.000..0.000, default: 9.000)

Output attenuation (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Pitch co-efficient

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Effect cutoff freq (Hz)

Dry/wetmix=<number> (0.000..1.000, default: 0.001)

Dry/wet mix

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Wave Smoothness

Frequenz (Hz)

Rate

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Average stall (ms)

Flangefrequency(Hz)=<number> (0.500..8.000, default: 2.500)

Flange frequency (Hz)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Delay Time (s)

DryLevel(dB)=<number> (-70.000..0.000, default: 0.000)

Dry Level (dB)

WetLevel(dB)=<number> (-70.000..0.000, default: 0.000)

Wet Level (dB)

Feedback=<number> (0.000..1.000, default: 0.000)

Feedback

Crossfadesamples=<number> (0..5000, default: 1250)

Crossfade samples

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Modulation depth (0=none, 1=AM, 2=RM)

Frequency(Hz)=<number> (1.000..1000.000, default: 440.000)

Frequency (Hz)

Sinelevel=<number> (-1.000..1.000, default: 440.000)

Sine level

Trianglelevel=<number> (-1.000..1.000, default: 440.000)

Triangle level

Sawtoothlevel=<number> (-1.000..1.000, default: 440.000)

Sawtooth level

Squarelevel=<number> (-1.000..1.000, default: 440.000)

Square level

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..10.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)

Makeup gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

RMS/peak

Attacktime(ms)=<number> (1.500..400.000, default: 101.125)

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..20.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)

Makeup gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

RMS/peak

Attacktime(ms)=<number> (1.500..400.000, default: 101.125)

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..20.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)

Makeup gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

RMS/peak

Attacktime(ms)=<number> (1.500..400.000, default: 101.125)

Attack time (ms)

Releasetime(ms)=<number> (2.000..800.000, default: 401.000)

Release time (ms)

Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)

Threshold level (dB)

Ratio(1:n)=<number> (1.000..20.000, default: 0.000)

Ratio (1:n)

Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)

Knee radius (dB)

Attenuation(dB)=<number> (-24.000..0.000, default: 3.250)

Attenuation (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Input to Subtract

Input

Second Input

Denominator

Numerator

Second Input

Sift size

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Threshold

CompressionRatio=<number> (default: 0.500)

Compression Ratio

OutputEnvelopeAttack(s)=<number> (default: 0.100)

Output Envelope Attack (s)

OutputEnvelopeDecay(s)=<number> (default: 0.100)

Output Envelope Decay (s)

Threshold

CompressionRatio=<number> (default: 0.500)

Compression Ratio

OutputEnvelopeAttack(s)=<number> (default: 0.100)

Output Envelope Attack (s)

OutputEnvelopeDecay(s)=<number> (default: 0.100)

Output Envelope Decay (s)

Threshold

ExpansionRatio=<number> (default: 0.500)

Expansion Ratio

OutputEnvelopeAttack(s)=<number> (default: 0.100)

Output Envelope Attack (s)

OutputEnvelopeDecay(s)=<number> (default: 0.100)

Output Envelope Decay (s)

Threshold

ExpansionRatio=<number> (default: 0.500)

Expansion Ratio

OutputEnvelopeAttack(s)=<number> (default: 0.100)

Output Envelope Attack (s)

OutputEnvelopeDecay(s)=<number> (default: 0.100)

Output Envelope Decay (s)

Threshold

OutputEnvelopeAttack(s)=<number> (default: 0.100)

Output Envelope Attack (s)

OutputEnvelopeDecay(s)=<number> (default: 0.100)

Output Envelope Decay (s)

Threshold

OutputEnvelopeAttack(s)=<number> (default: 0.100)

Output Envelope Attack (s)

OutputEnvelopeDecay(s)=<number> (default: 0.100)

Output Envelope Decay (s)

Amps gain (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Max Delay (s)

DelayTime(s)=<number> (default: 0.000)

Delay Time (s)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Amplitude

Frequency

Gain (dB)

Frequency(Hz)=<number> (0.000..0.400, default: 440.000)

Frequency (Hz)

Bandwidth(octaves)=<number> (0.000..4.000, default: 440.000)

Bandwidth (octaves)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Wrap degree

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Resample rate

Smoothing=<number> (0.000..1.000, default: 1.000)

Smoothing

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Filter type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)

Filterfreq=<number> (0.000..6000.000, default: 440.000)

Filter freq

FilterQ=<number> (0.000..1.000, default: 0.250)

Filter Q

Filterresonance=<number> (0.000..1.000, default: 0.250)

Filter resonance

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Frequency [Hz]

Depth[%]=<number> (0.000..100.000, default: 0.000)

Depth [%]

Gain[dB]=<number> (-70.000..20.000, default: 0.000)

Gain [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Frequency [Hz]

L/RPhaseShift[deg]=<number> (0.000..180.000, default: 90.000)

L/R Phase Shift [deg]

Depth[%]=<number> (0.000..100.000, default: 75.000)

Depth [%]

Delay[ms]=<number> (0.000..100.000, default: 25.000)

Delay [ms]

Contour[Hz]=<number> (20.000..20000.000, default: 100.000)

Contour [Hz]

DryLevel[dB]=<number> (-90.000..20.000, default: 100.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: 100.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Threshold Level [dB]

Frequency[Hz]=<number> (2000.000..16000.000, default: 5500.000)

Frequency [Hz]

SidechainFilter=<number> (0..1, default: 5500)

Sidechain Filter

Monitor=<number> (0..1, default: 5500)

Monitor

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Attack [ms]

Release[ms]=<number> (4.000..1000.000, default: 502.000)

Release [ms]

OffsetGain[dB]=<number> (-20.000..20.000, default: 502.000)

Offset Gain [dB]

MakeupGain[dB]=<number> (-20.000..20.000, default: 502.000)

Makeup Gain [dB]

Function=<number> (0..14, default: 502)

Function

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Attack [ms]

Release[ms]=<number> (4.000..1000.000, default: 502.000)

Release [ms]

OffsetGain[dB]=<number> (-20.000..20.000, default: 502.000)

Offset Gain [dB]

MakeupGain[dB]=<number> (-20.000..20.000, default: 502.000)

Makeup Gain [dB]

StereoMode=<number> (0..2, default: 502)

Stereo Mode

Function=<number> (0..14, default: 502)

Function

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Band 1 Gain [dB]

Band2Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 2 Gain [dB]

Band3Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 3 Gain [dB]

Band4Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 4 Gain [dB]

Band5Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 5 Gain [dB]

Band6Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 6 Gain [dB]

Band7Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 7 Gain [dB]

Band8Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 8 Gain [dB]

Band1Freq[Hz]=<number> (40.000..280.000, default: 100.000)

Band 1 Freq [Hz]

Band2Freq[Hz]=<number> (100.000..500.000, default: 200.000)

Band 2 Freq [Hz]

Band3Freq[Hz]=<number> (200.000..1000.000, default: 400.000)

Band 3 Freq [Hz]

Band4Freq[Hz]=<number> (400.000..2800.000, default: 1000.000)

Band 4 Freq [Hz]

Band5Freq[Hz]=<number> (1000.000..5000.000, default: 3000.000)

Band 5 Freq [Hz]

Band6Freq[Hz]=<number> (3000.000..9000.000, default: 6000.000)

Band 6 Freq [Hz]

Band7Freq[Hz]=<number> (6000.000..18000.000, default: 12000.000)

Band 7 Freq [Hz]

Band8Freq[Hz]=<number> (10000.000..20000.000, default: 15000.000)

Band 8 Freq [Hz]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Band 1 Gain [dB]

Band2Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 2 Gain [dB]

Band3Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 3 Gain [dB]

Band4Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 4 Gain [dB]

Band5Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 5 Gain [dB]

Band6Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 6 Gain [dB]

Band7Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 7 Gain [dB]

Band8Gain[dB]=<number> (-50.000..20.000, default: 0.000)

Band 8 Gain [dB]

Band1Freq[Hz]=<number> (40.000..280.000, default: 100.000)

Band 1 Freq [Hz]

Band2Freq[Hz]=<number> (100.000..500.000, default: 200.000)

Band 2 Freq [Hz]

Band3Freq[Hz]=<number> (200.000..1000.000, default: 400.000)

Band 3 Freq [Hz]

Band4Freq[Hz]=<number> (400.000..2800.000, default: 1000.000)

Band 4 Freq [Hz]

Band5Freq[Hz]=<number> (1000.000..5000.000, default: 3000.000)

Band 5 Freq [Hz]

Band6Freq[Hz]=<number> (3000.000..9000.000, default: 6000.000)

Band 6 Freq [Hz]

Band7Freq[Hz]=<number> (6000.000..18000.000, default: 12000.000)

Band 7 Freq [Hz]

Band8Freq[Hz]=<number> (10000.000..20000.000, default: 15000.000)

Band 8 Freq [Hz]

Band1Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 1 Bandwidth [octaves]

Band2Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 2 Bandwidth [octaves]

Band3Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 3 Bandwidth [octaves]

Band4Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 4 Bandwidth [octaves]

Band5Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 5 Bandwidth [octaves]

Band6Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 6 Bandwidth [octaves]

Band7Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 7 Bandwidth [octaves]

Band8Bandwidth[octaves]=<number> (0.100..5.000, default: 15000.000)

Band 8 Bandwidth [octaves]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Time Tracking

PitchTracking=<number> (0.000..1.000, default: 0.500)

Pitch Tracking

DryLevel[dB]=<number> (-90.000..20.000, default: 0.500)

Dry Level [dB]

DryLeftPosition=<number> (0.000..1.000, default: 0.000)

Dry Left Position

DryRightPosition=<number> (0.000..1.000, default: 1.000)

Dry Right Position

WetLevel[dB]=<number> (-90.000..20.000, default: 1.000)

Wet Level [dB]

WetLeftPosition=<number> (0.000..1.000, default: 0.000)

Wet Left Position

WetRightPosition=<number> (0.000..1.000, default: 1.000)

Wet Right Position

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Fractal Dimension

SignalLevel[dB]=<number> (-90.000..20.000, default: 0.500)

Signal Level [dB]

NoiseLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Noise Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Semitone Shift

RateShift[%]=<number> (-50.000..100.000, default: 0.000)

Rate Shift [%]

DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Fragment Length [ms]

DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Decay [ms]

DryLevel[dB]=<number> (-70.000..10.000, default: 2500.000)

Dry Level [dB]

WetLevel[dB]=<number> (-70.000..10.000, default: 2500.000)

Wet Level [dB]

CombFilters=[1|0] (default: 1)

Comb Filters

AllpassFilters=[1|0] (default: 1)

Allpass Filters

BandpassFilter=[1|0] (default: 1)

Bandpass Filter

EnhancedStereo=[1|0] (default: 1)

Enhanced Stereo

ReverbType=<number> (0..42, default: 2500)

Reverb Type

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Rotor Frequency [Hz]

HornFrequency[Hz]=<number> (0.000..30.000, default: 0.000)

Horn Frequency [Hz]

MicDistance[%]=<number> (0.000..100.000, default: 25.000)

Mic Distance [%]

Rotor/HornMix=<number> (0.000..1.000, default: 0.500)

Rotor/Horn Mix

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Limit Level [dB]

OutputVolume[dB]=<number> (-30.000..20.000, default: 0.000)

Output Volume [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Pre Gain [dB]

PostGain[dB]=<number> (-90.000..20.000, default: 0.000)

Post Gain [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

L Delay [ms]

LFeedback[%]=<number> (0.000..100.000, default: 100.000)

L Feedback [%]

R/HaasDelay[ms]=<number> (0.000..2000.000, default: 100.000)

R/Haas Delay [ms]

R/HaasFeedback[%]=<number> (0.000..100.000, default: 100.000)

R/Haas Feedback [%]

LEchoLevel[dB]=<number> (-70.000..10.000, default: 100.000)

L Echo Level [dB]

REchoLevel[dB]=<number> (-70.000..10.000, default: 100.000)

R Echo Level [dB]

DryLevel[dB]=<number> (-70.000..10.000, default: 100.000)

Dry Level [dB]

CrossMode=[1|0] (default: 1)

Cross Mode

HaasEffect=[1|0] (default: 1)

Haas Effect

SwapOutputs=[1|0] (default: 1)

Swap Outputs

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Frequency [Hz]

Depth[%]=<number> (0.000..100.000, default: 0.000)

Depth [%]

Gain[dB]=<number> (-70.000..20.000, default: 0.000)

Gain [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Drive

Tape--TubeBlend=<number> (-10.000..10.000, default: 10.000)

Tape--Tube Blend

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Frequency [Hz]

Depth[%]=<number> (0.000..20.000, default: 0.000)

Depth [%]

DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Dry Level [dB]

WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)

Wet Level [dB]

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Tape speed (inches/sec, 1=normal)

Drylevel(dB)=<number> (-90.000..0.000, default: -90.000)

Dry level (dB)

Tap1distance(inches)=<number> (0.000..4.000, default: -90.000)

Tap 1 distance (inches)

Tap1level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 1 level (dB)

Tap2distance(inches)=<number> (0.000..4.000, default: 1.000)

Tap 2 distance (inches)

Tap2level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 2 level (dB)

Tap3distance(inches)=<number> (0.000..4.000, default: 2.000)

Tap 3 distance (inches)

Tap3level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 3 level (dB)

Tap4distance(inches)=<number> (0.000..4.000, default: 3.000)

Tap 4 distance (inches)

Tap4level(dB)=<number> (-90.000..0.000, default: -90.000)

Tap 4 level (dB)

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Attack speed

Sustaintime=<number> (-1.000..1.000, default: 0.000)

Sustain time

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Low-shelving gain (dB)

Low-shelvingfrequency(Hz)=<number> (0.000..0.490, default: 0.000)

Low-shelving frequency (Hz)

Low-shelvingslope=<number> (0.000..1.000, default: 0.500)

Low-shelving slope

Band1gain(dB)=<number> (-70.000..30.000, default: 0.500)

Band 1 gain (dB)

Band1frequency(Hz)=<number> (0.000..0.490, default: 0.001)

Band 1 frequency (Hz)

Band1bandwidth(octaves)=<number> (0.000..4.000, default: 0.001)

Band 1 bandwidth (octaves)

Band2gain(dB)=<number> (-70.000..30.000, default: 0.001)

Band 2 gain (dB)

Band2frequency(Hz)=<number> (0.000..0.490, default: 0.007)

Band 2 frequency (Hz)

Band2bandwidth(octaves)=<number> (0.000..4.000, default: 0.007)

Band 2 bandwidth (octaves)

Band3gain(dB)=<number> (-70.000..30.000, default: 0.007)

Band 3 gain (dB)

Band3frequency(Hz)=<number> (0.000..0.490, default: 0.059)

Band 3 frequency (Hz)

Band3bandwidth(octaves)=<number> (0.000..4.000, default: 0.059)

Band 3 bandwidth (octaves)

High-shelvinggain(dB)=<number> (-70.000..30.000, default: 0.059)

High-shelving gain (dB)

High-shelvingfrequency(Hz)=<number> (0.000..0.490, default: 0.490)

High-shelving frequency (Hz)

High-shelvingslope=<number> (0.000..1.000, default: 0.500)

High-shelving slope

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Trigger

Cutoff=<number> (0.000..1.000, default: 0.000)

Cutoff

Resonance=<number> (0.000..1.000, default: 0.000)

Resonance

EnvelopeModulation=<number> (0.000..1.000, default: 0.000)

Envelope Modulation

Decay=<number> (0.000..1.000, default: 0.000)

Decay

Sag level

Distortion=<number> (0.000..1.000, default: 0.000)

Distortion

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Distortion level

Distortioncharacter=<number> (0.000..1.000, default: 0.000)

Distortion character

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Volume

Year

RPM=<number> (33.000..78.000, default: 33.000)

RPM

Surfacewarping=<number> (0.000..1.000, default: 33.000)

Surface warping

Crackle=<number> (0.000..1.000, default: 33.000)

Crackle

Wear=<number> (0.000..1.000, default: 33.000)

Wear

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Limiting Amplitude

Waveshape

$run_adding=[1|0] (default: 0)

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Add effect to input data

$run_adding_gain=<number> (-70.00..0.00, default: 0.00)

Add gain (dB)

Overall gain for this filter. This is only valid if you add the effect to the input data

Supported strings: gauss triangular box

Default: gauss

Mode

radius_h=<number> (0.5..50.0, default: 0.5)

Horizontal radius

radius_v=<number> (0.5..50.0, default: 0.5)

Vertical radius

blur_chroma=[1|0] (default: 0)

Blur chroma planes

correct_nonsquare=[1|0] (default: 0)

Correct radii for nonsquare pixels

Supported strings: fg all

Default: all

Mode

Supported strings: app disapp

Default: disapp

Mode

Red gain

g=<number> (0.00..2.00, default: 1.00)

Green gain

b=<number> (0.00..2.00, default: 1.00)

Blue gain

n=[1|0] (default: 0)

Normalize

Normalize for constant luminance.

Blend num

Crop left

Cut this many pixels from the left border of the source images.

crr=<number> (0.000..100000.000, default: 0.000)

Crop right

Cut this many pixels from the right border of the source images.

crt=<number> (0.000..100000.000, default: 0.000)

Crop top

Cut this many pixels from the top border of the source images.

crb=<number> (0.000..100000.000, default: 0.000)

Crop bottom

Cut this many pixels from the bottom border of the source images.

s=<string>

Supported strings: from_input user_defined pal_d1 pal_d1_wide pal_dv pal_dv_wide pal_cvd pal_vcd pal_svcd pal_svcd_wide ntsc_d1 ntsc_d1_wide ntsc_dv ntsc_dv_wide ntsc_cvd ntsc_vcd ntsc_svcd ntsc_svcd_wide 720 1080 vga qvga sqcif qcif cif 4cif 16cif

Default: from_input

Image size

Set the output image size. For a user defined size, you must specify the width and height as well as the pixel width and pixel height.

w=<number> (1..100000, default: 640)

User defined width

User defined width in pixels. Only meaningful if you selected "User defined" for the image size.

h=<number> (1..100000, default: 480)

User defined height

User defined height in pixels. Only meaningful if you selected "User defined" for the image size.

sw=<number> (1..100000, default: 1)

User defined pixel width

User defined pixel width. Only meaningful if you selected "User defined" for the image size.

sh=<number> (1..100000, default: 1)

User defined pixel height

User defined pixel height. Only meaningful if you selected "User defined" for the image size.

ka=[1|0] (default: 1)

Maintain aspect ratio

Let the aspect ratio appear the same as in the source, probably resulting in additional borders.

bc=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Border color

Color of the image borders.

squeeze=<number> (-1.000..1.000, default: 0.000)

Squeeze

zoom=<number> (20..180, default: 100)

Zoom

sm=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

so=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

downscale_filter=<string>

Supported strings: auto none wide gauss

Default: auto

Antialiasing for downscaling

Specifies the antialiasing filter to be used when downscaling images.

downscale_blur=<number> (0.00..2.00, default: 1.00)

Blur factor for downscaling

Specifies how much blurring should be applied when downscaling. Smaller values can speed up scaling, but might result in strong aliasing.

chroma_output=<string>

Supported strings: from_input 444 422 420mpeg1 420mpeg2 420paldv 411

Default: from_input

Chroma output

Set the output chroma format to that of the destination. This can save one chroma scaling operation at a later stage. It only works if the input pixelformat is otherwise compatible to the output.

deinterlace=<string>

Supported strings: never auto always

Default: never

Deinterlace

ddm=<string>

Supported strings: top bottom

Default: top

Drop mode

Specifies which field the deinterlacer should drop.

Block threshold

Specifies how much a block may differ from the last non-skipped block. 0 means identical blocks, 1 means completely different blocks. Note that the meaning of "completely different" depends on the colorspace.

threshold_total=<number> (0.00..1.00, default: 0.00)

Total threshold

Specifies how much a frame may differ from the last non-skipped frame. 0 means identical frames, 1 means completely different frames. Note that the meaning of "completely different" depends on the colorspace.

skip_max=<number> (1..500, default: 10)

Maximum skipped frames

Maximum number of consecutive skipped frames

do_log=[1|0] (default: 0)

Report results

Log reports about skipped frames

Supported strings: none copy scale_hw scale_sw blend yadif yadif_fast

Default: none

Method

force=[1|0] (default: 0)

Force deinterlacing

Always perform deinterlacing even if the source format pretends to be progressive

output_mode=<string>

Supported strings: top bottom first second both

Default: top

Output mode

Specify which field to output. Outputting both fields is not always supported.

sm=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

so=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

Square Size

Tolerance

Interpolate missing

Interpolate missing timecodes

color=<r>,<g>,<b>,<a> (default: 1.000,1.000,1.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Text color

border_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Border color

border_width=<number> (0.00..10.00, default: 2.00)

Border width

font=<string> (Default: Courier-20)

Font

justify_h=<string>

Supported strings: center left right

Default: right

Horizontal justify

justify_v=<string>

Supported strings: center top bottom

Default: top

Vertical justify

border_left=<number> (0..65535, default: 10)

Left border

Distance from the left text border to the image border

border_right=<number> (0..65535, default: 10)

Right border

Distance from the right text border to the image border

border_top=<number> (0..65535, default: 10)

Top border

Distance from the top text border to the image border

border_bottom=<number> (0..65535, default: 10)

Bottom border

Distance from the bottom text border to the image border

Scale

speedx=<number> (-100..100, default: 10)

Horizontal scroll speed

speedy=<number> (-100..100, default: 10)

Vertical scroll speed

Supported strings: dots hearts

Default: dots

Mode

<r>, <g> and <b> are in the range 0.0..1.0

Color

Brightness

contrast=<number> (-10.0..10.0, default: 0.0)

Contrast

saturation=<number> (-10.0..10.0, default: 0.0)

Saturation

hue=<number> (-180.0..180.0, default: 0.0)

Hue

Supported strings: fg light dark

Default: all

Mode

Flip horizontally

flip_v=[1|0] (default: 0)

Flip vertically

Supported strings: from_source user_defined 23_976 24 25 29_970 30 50 59_940 60

Default: from_source

Framerate

Output framerate. For user defined framerate, enter the timescale and frame duration below (framerate = timescale / frame duration).

timescale=<number> (1..100000, default: 25)

Timescale

Timescale for user defined output framerate (Framerate = timescale / frame duration).

frame_duration=<number> (1..100000, default: 1)

Frame duration

Frame duration for user defined output framerate (Framerate = timescale / frame duration).

Supported strings: 8 bpp gray 16 bpp gray Float gray 16 bpp gray + alpha 32 bpp gray + alpha Float gray + alpha 15 bpp RGB 15 bpp BGR 16 bpp RGB 16 bpp BGR 24 bpp RGB 24 bpp BGR 32 bpp RGB 32 bpp BGR 32 bpp RGBA 48 bpp RGB 64 bpp RGBA Float RGB Float RGBA YUV 422 (YUY2) YUV 422 (UYVY) YUVA 4444 (8 bit) YUVA 4444 (16 bit) YUVA 4444 (float) YUV 444 (float) YUV 420 Planar YUV 410 Planar YUV 411 Planar YUV 422 Planar YUV 422 Planar (16 bit) YUV 444 Planar YUV 444 Planar (16 bit) YUVJ 420 Planar YUVJ 422 Planar YUVJ 444 Planar

Default: YUV 420 Planar

Pixelformat

Supported strings: top bottom

Default: top

Output field order

Invert red

g=[1|0] (default: 1)

Invert green

b=[1|0] (default: 1)

Invert blue

a=[1|0] (default: 1)

Invert alpha

X

y=<number> (0.00..1.00, default: 0.25)

Y

lens_width=<number> (0.00..1.00, default: 0.25)

Diameter

lens_zoom=<number> (5..200, default: 30)

Zoom

Blend

Supported strings: delay scratch nervous

Default: delay

Mode

direction=<string>

Supported strings: left right top bottom

Default: right

Direction

mirror=<string>

Supported strings: normal mirror copy

Default: mirror

Mirror

delay=<number> (0..31, default: 10)

Delay

Supported strings: random scratch

Default: random

Mode

Supported strings: bw tech1 tech2

Default: tech1

Style

strength=<number> (0.000..1.000, default: 1.000)

Strength

r_gain=<number> (0.000..2.000, default: 1.000)

Red gain

g_gain=<number> (0.000..2.000, default: 1.000)

Green gain

b_gain=<number> (0.000..2.000, default: 1.000)

Blue gain

Supported strings: maelstrom radiation perspective vertical

Default: maelstrom

Mode

speed=<number> (-64..64, default: 16)

Speed

Supported strings: horizontal vertical diagonal dissolution random raster

Default: horizontal

Mode

strength=<number> (0.00..1.00, default: 0.20)

Strength

Red -> Red

g_to_r=<number> (-2.000..2.000, default: 0.000)

Green -> Red

b_to_r=<number> (-2.000..2.000, default: 0.000)

Blue -> Red

a_to_r=<number> (-2.000..2.000, default: 0.000)

Alpha -> Red

off_r=<number> (-2.000..2.000, default: 0.000)

Red offset

r_to_g=<number> (-2.000..2.000, default: 0.000)

Red -> Green

g_to_g=<number> (-2.000..2.000, default: 1.000)

Green -> Green

b_to_g=<number> (-2.000..2.000, default: 0.000)

Blue -> Green

a_to_g=<number> (-2.000..2.000, default: 0.000)

Alpha -> Green

off_g=<number> (-2.000..2.000, default: 0.000)

Green offset

r_to_b=<number> (-2.000..2.000, default: 0.000)

Red -> Blue

g_to_b=<number> (-2.000..2.000, default: 0.000)

Green -> Blue

b_to_b=<number> (-2.000..2.000, default: 1.000)

Blue -> Blue

a_to_b=<number> (-2.000..2.000, default: 0.000)

Alpha -> Blue

off_b=<number> (-2.000..2.000, default: 0.000)

Blue offset

r_to_a=<number> (-2.000..2.000, default: 0.000)

Red -> Alpha

g_to_a=<number> (-2.000..2.000, default: 0.000)

Green -> Alpha

b_to_a=<number> (-2.000..2.000, default: 0.000)

Blue -> Alpha

a_to_a=<number> (-2.000..2.000, default: 1.000)

Alpha -> Alpha

off_a=<number> (-2.000..2.000, default: 0.000)

Alpha offset

force_alpha=[1|0] (default: 0)

Force alpha

Create video with alpha channel even if the input format has no alpha channel. Use this to generate the alpha channel from other channels using the colormatrix.

Supported strings: wall cross

Default: wall

Method

<r>, <g> and <b> are in the range 0.0..1.0

Line color

bg_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Background

spacing=<number> (0.000..1.000, default: 0.100)

Spacing

amplitude=<number> (0.00..1.00, default: 0.10)

Amplitude

vgrabtime=<number> (1..10, default: 1)

Grab interval

Supported strings: motion rain

Default: motion

Mode

loopnum=<number> (1..5, default: 2)

Speed

strength=<number> (1..10, default: 8)

Strength

decay_cfg=<number> (1..15, default: 8)

Decay

Color

Red mask

mask_g=[1|0] (default: 1)

Green mask

mask_b=[1|0] (default: 1)

Blue mask

Bits to shift

<r>, <g> and <b> are in the range 0.0..1.0

Color

mirror_mode=<string>

Supported strings: no l r d dl dr u ul ur

Default: no

Mirror mode

Supported strings: fg light dark

Default: all

Mode

Supported strings: Concentric A Sawtooth Up Sawtooth Down Triangle Sinusoidal Concentric B Lens Flat

Default: Concentric A

Mode

g_focus_interval=<number> (0..60, default: 6)

Focus interval

center_x=<number> (0.000..1.000, default: 0.500)

Center x

center_y=<number> (0.000..1.000, default: 0.500)

Center y

g_depth_shift=<number> (0..5, default: 0)

Depth shift

Strength

0 means no effect, 1 means maximum (= still image)

quality=<number> (1..5, default: 2)

Quality

Supported strings: rotate affine perspective lens_effect whirl

Default: rotate

Transformation mode

Choose Transformation method. Each method can be configured in it's section.

im=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline

Default: auto

Interpolation mode

Choose interpolation method. Auto means to choose based on the conversion quality. Nearest is fastest, Bicubic is slowest.

bg_color=<r>,<g>,<b>,<a> (default: 0.000,0.000,0.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Background color

rotate_angle=<number> (-360.00..360.00, default: 0.00)

Angle

affine_xx=<number> (-2.000..2.000, default: 1.000)

X -> X

affine_xy=<number> (-2.000..2.000, default: 0.000)

X -> Y

affine_yx=<number> (-2.000..2.000, default: 0.000)

Y -> X

affine_yy=<number> (-2.000..2.000, default: 1.000)

Y -> Y

affine_ox=<number> (-1.000..1.000, default: 0.000)

X Offset

Normalized X offset. 1 corresponds to image with.

affine_oy=<number> (-1.000..1.000, default: 0.000)

Y Offset

Normalized Y offset. 1 corresponds to image height.

perspective_tl=<x>,<y> (default: 0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Top left

Top left corner in normalized image coordinates

perspective_tr=<x>,<y> (default: 1.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Top right

Top right corner in normalized image coordinates

perspective_bl=<x>,<y> (default: 0.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Bottom left

Bottom left corner in normalized image coordinates

perspective_br=<x>,<y> (default: 1.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Bottom right

Bottom right corner in normalized image coordinates

lens_effect_pos=<x>,<y> (default: 0.500,0.500)

<r>, <g> and <b> are in the range 0.0..1.0

Position

Center of the lens

lens_effect_diameter=<number> (0.00..1.00, default: 0.25)

Diameter

Diamater of the lens (1 is image size)

lens_effect_zoom=<number> (5.00..200.00, default: 20.00)

Zoom

Zoom factor

whirl_center=<x>,<y> (default: 0.500,0.500)

<r>, <g> and <b> are in the range 0.0..1.0

Center

whirl_radius=<number> (0.00..1.00, default: 0.50)

Radius

whirl_pinch=<number> (0.00..1.00, default: 0.50)

Pinch

whirl_angle=<number> (0.00..360.00, default: 30.00)

Angle

Transformation

Supported strings: off interpolate remove_redundant remove_all add add_first

Default: off

Mode

int_framerate=<number> (1..999, default: 25)

Integer framerate

Set the integer framerate used when adding new timecodes

drop=[1|0] (default: 0)

Drop frame

Set the if drop frame is used when adding new timecodes

hours=<number> (0..23, default: 0)

Start hour

Set the start hours used when adding new timecodes

minutes=<number> (0..59, default: 0)

Start minute

Set the start minutes used when adding new timecodes

seconds=<number> (0..59, default: 0)

Start second

Set the start seconds used when adding new timecodes

frames=<number> (0..999, default: 0)

Start frames

Set the start frames used when adding new timecodes

Phase increment

zoomrate=<number> (1.01..1.10, default: 1.01)

Zoom rate

Luminance -> Luminance

u_to_y=<number> (-2.000..2.000, default: 0.000)

Cb -> Luminance

v_to_y=<number> (-2.000..2.000, default: 0.000)

Cr -> Luminance

a_to_y=<number> (-2.000..2.000, default: 0.000)

Alpha -> Luminance

off_y=<number> (-2.000..2.000, default: 0.000)

Luminance offset

r_to_u=<number> (-2.000..2.000, default: 0.000)

Luminance -> Cb

u_to_u=<number> (-2.000..2.000, default: 1.000)

Cb -> Cb

b_to_u=<number> (-2.000..2.000, default: 0.000)

Cr -> Cb

a_to_u=<number> (-2.000..2.000, default: 0.000)

Alpha -> Cb

off_u=<number> (-2.000..2.000, default: 0.000)

Cb offset

y_to_v=<number> (-2.000..2.000, default: 0.000)

Luminance -> Cr

u_to_v=<number> (-2.000..2.000, default: 0.000)

Cb -> Cr

v_to_v=<number> (-2.000..2.000, default: 1.000)

Cr -> Cr

a_to_v=<number> (-2.000..2.000, default: 0.000)

Alpha -> Cr

off_v=<number> (-2.000..2.000, default: 0.000)

Cr offset

y_to_a=<number> (-2.000..2.000, default: 0.000)

Luminance -> Alpha

u_to_a=<number> (-2.000..2.000, default: 0.000)

Cb -> Alpha

v_to_a=<number> (-2.000..2.000, default: 0.000)

Cr -> Alpha

a_to_a=<number> (-2.000..2.000, default: 1.000)

Alpha -> Alpha

off_a=<number> (-2.000..2.000, default: 0.000)

Alpha offset

force_alpha=[1|0] (default: 0)

Force alpha

Create video with alpha channel even if the input format has no alpha channel. Use this to generate the alpha channel from other channels using the colormatrix.

Zoom horizontally

zoom_v=<number> (0.50..2.00, default: 1.00)

Zoom vertically

sm=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

so=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

downscale_filter=<string>

Supported strings: auto none wide gauss

Default: auto

Antialiasing for downscaling

Specifies the antialiasing filter to be used when downscaling images.

downscale_blur=<number> (0.00..2.00, default: 1.00)

Blur factor for downscaling

Specifies how much blurring should be applied when downscaling. Smaller values can speed up scaling, but might result in strong aliasing.

quality=<number> (1..5, default: 2)

Quality

bg_color=<r>,<g>,<b>,<a> (default: 0.000,0.000,0.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Background color

<r>, <g> and <b> are in the range 0.0..1.0

Black color

Black color

Graycolor=<r>,<g>,<b> (default: 0.500,0.500,0.500)

<r>, <g> and <b> are in the range 0.0..1.0

Gray color

Gray color

Whitecolor=<r>,<g>,<b> (default: 1.000,1.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

White color

White color

Splitpreview=[1|0] (default: 1)

Split preview

Split privew

Sourceimageonleftside=[1|0] (default: 1)

Source image on left side

Source image on left side

X axis rotation

Rotation on the X axis

Yaxisrotation=<number> (0.0000..1.0000, default: 0.5000)

Y axis rotation

Rotation on the Y axis

Zaxisrotation=<number> (0.0000..1.0000, default: 0.5000)

Z axis rotation

Rotation on the Z axis

Xaxisrotationrate=<number> (0.0000..1.0000, default: 0.5000)

X axis rotation rate

Rotation rate on the X axis

Yaxisrotationrate=<number> (0.0000..1.0000, default: 0.5000)

Y axis rotation rate

Rotation rate on the Y axis

Zaxisrotationrate=<number> (0.0000..1.0000, default: 0.5000)

Z axis rotation rate

Rotation rate on the Z axis

Centerposition(X)=<number> (0.0000..1.0000, default: 0.0000)

Center position (X)

Position of the center of rotation on the X axis

Centerposition(Y)=<number> (0.0000..1.0000, default: 0.0000)

Center position (Y)

Position of the center of rotation on the Y axis

Invertrotationassignment=[1|0] (default: 0)

Invert rotation assignment

If true, when mapping rotation, make inverted (wrong) assignment

Don'tblankmask=[1|0] (default: 0)

Don't blank mask

Mask for frame transposition is not blanked, so a trace of old transpositions is maintained

Fillwithimageorblack=[1|0] (default: 0)

Fill with image or black

If true, pixels that are not transposed are black, otherwise, they are copied with the original

Brightness

The brightness value

triplevel

level of trip: use high numbers, incremented by 100

diffspace=<number> (0.0000..1.0000, default: 1.0000)

diffspace

difference space: a value from 0 to 256

<r>, <g> and <b> are in the range 0.0..1.0

Color

The Source Color

Contrast

The contrast value

Channel

Channel to adjust levels (1 = RED; 2 = GREEN; 3 = BLUE; 4 = LUMA)

Showcurves=[1|0] (default: 1)

Show curves

Draw curve graph on output image

Graphposition=<number> (0.0000..1.0000, default: 3.0000)

Graph position

Output image corner where curve graph will be drawn (1 = TOP,LEFT; 2 = TOP,RIGHT; 3 = BOTTOM,LEFT; 4 = BOTTOM, RIGHT)

Curvepointnumber=<number> (0.0000..1.0000, default: 2.0000)

Curve point number

Number of point to use to build curve

Point1inputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 1 input value

Point 1 input value

Point1outputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 1 output value

Point 1 output value

Point2inputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 2 input value

Point 2 input value

Point2outputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 2 output value

Point 2 output value

Point3inputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 3 input value

Point 3 input value

Point3outputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 3 output value

Point 3 output value

Point4inputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 4 input value

Point 4 input value

Point4outputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 4 output value

Point 4 output value

Point5inputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 5 input value

Point 5 input value

Point5outputvalue=<number> (0.0000..1.0000, default: 1.0000)

Point 5 output value

Point 5 output value

Amount

Focal Ratio

DeFish=[1|0] (default: 0)

DeFish

Fish or Defish

Type=<number> (0.0000..1.0000, default: 0.6667)

Type

Mapping function

Scaling=<number> (0.0000..1.0000, default: 0.6667)

Scaling

Scaling method

ManualScale=<number> (0.0000..1.0000, default: 0.5000)

Manual Scale

Manual Scale

Interpolator=<number> (0.0000..1.0000, default: 0.1667)

Interpolator

Quality of interpolation

Aspecttype=<number> (0.0000..1.0000, default: 0.0000)

Aspect type

Pixel aspect ratio presets

ManualAspect=<number> (0.0000..1.0000, default: 0.5000)

Manual Aspect

Manual Pixel Aspect ratio

Amplitude

The amplitude of the plasma signal

Frequency=<number> (0.0000..1.0000, default: 0.0050)

Frequency

The frequency of the plasma signal

lthresh

threshold for edge lightening

lupscale=<number> (0.0000..1.0000, default: 0.0000)

lupscale

multiplier for upscaling edge brightness

lredscale=<number> (0.0000..1.0000, default: 0.0000)

lredscale

multiplier for downscaling non-edge brightness

X axis

Flipping on the horizontal axis

Yaxis=[1|0] (default: 0)

Y axis

Flipping on the vertical axis

Gamma

The gamma value

Blur

Blur of the glow

Hue

The shift value

Num

The number of clusters

Distweight=<number> (0.0000..1.0000, default: 0.5000)

Dist weight

The weight on distance

xcenter

ycenter=<number> (0.0000..1.0000, default: 0.5000)

ycenter

correctionnearcenter=<number> (0.0000..1.0000, default: 0.5000)

correctionnearcenter

correctionnearedges=<number> (0.0000..1.0000, default: 0.5000)

correctionnearedges

brightness=<number> (0.0000..1.0000, default: 0.5000)

brightness

Border Width

Transparency=[1|0] (default: 0)

Transparency

Channel

Channel to adjust levels

Inputblacklevel=<number> (0.0000..1.0000, default: 0.0000)

Input black level

Input black level

Inputwhitelevel=<number> (0.0000..1.0000, default: 1.0000)

Input white level

Input white level

Gamma=<number> (0.0000..1.0000, default: 0.2500)

Gamma

Gamma

Blackoutput=<number> (0.0000..1.0000, default: 0.0000)

Black output

Black output

Whiteoutput=<number> (0.0000..1.0000, default: 1.0000)

White output

White output

Showhistogram=[1|0] (default: 1)

Show histogram

Show histogram

Histogramposition=<number> (0.0000..1.0000, default: 3.0000)

Histogram position

Histogram position

Left

Right=<number> (0.0000..1.0000, default: 0.2000)

Right

Top=<number> (0.0000..1.0000, default: 0.2000)

Top

Bottom=<number> (0.0000..1.0000, default: 0.2000)

Bottom

Invert=[1|0] (default: 0)

Invert

Invert the mask, creates a hole in the frame.

Blur=<number> (0.0000..1.0000, default: 0.0000)

Blur

Blur the outline of the mask

<r>, <g> and <b> are in the range 0.0..1.0

Top Left

TopRight=<x>,<y> (default: 1.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Top Right

BottomLeft=<x>,<y> (default: 0.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Bottom Left

BottomRight=<x>,<y> (default: 1.000,1.000)

<r>, <g> and <b> are in the range 0.0..1.0

Bottom Right

rSlope

Slope of the red color component

gSlope=<number> (0.0000..1.0000, default: 1.0000)

gSlope

Slope of the green color component

bSlope=<number> (0.0000..1.0000, default: 1.0000)

bSlope

Slope of the blue color component

aSlope=<number> (0.0000..1.0000, default: 1.0000)

aSlope

Slope of the alpha component

rOffset=<number> (0.0000..1.0000, default: 0.0000)

rOffset

Offset of the red color component

gOffset=<number> (0.0000..1.0000, default: 0.0000)

gOffset

Offset of the green color component

bOffset=<number> (0.0000..1.0000, default: 0.0000)

bOffset

Offset of the blue color component

aOffset=<number> (0.0000..1.0000, default: 0.0000)

aOffset

Offset of the alpha component

rPower=<number> (0.0000..1.0000, default: 1.0000)

rPower

Power (Gamma) of the red color component

gPower=<number> (0.0000..1.0000, default: 1.0000)

gPower

Power (Gamma) of the green color component

bPower=<number> (0.0000..1.0000, default: 1.0000)

bPower

Power (Gamma) of the blue color component

aPower=<number> (0.0000..1.0000, default: 1.0000)

aPower

Power (Gamma) of the alpha component

saturation=<number> (0.0000..1.0000, default: 200.0000)

saturation

Overall saturation

Saturation

The saturation value

Clip left

Clipright=<number> (0.0000..1.0000, default: 0.0000)

Clip right

Cliptop=<number> (0.0000..1.0000, default: 0.0000)

Clip top

Clipbottom=<number> (0.0000..1.0000, default: 0.0000)

Clip bottom

ScaleX=<number> (0.0000..1.0000, default: 0.5000)

Scale X

ScaleY=<number> (0.0000..1.0000, default: 0.5000)

Scale Y

TiltX=<number> (0.0000..1.0000, default: 0.5000)

Tilt X

TiltY=<number> (0.0000..1.0000, default: 0.5000)

Tilt Y

Kernel size

The size of the kernel, as a proportion to its coverage of the image

Interval

Changing speed of small blocks

Threshold

The threshold

<r>, <g> and <b> are in the range 0.0..1.0

Map black to

The color to map source color with null luminance

Mapwhiteto=<r>,<g>,<b> (default: 0.500,1.000,0.500)

<r>, <g> and <b> are in the range 0.0..1.0

Map white to

The color to map source color with full luminance

Tintamount=<number> (0.0000..1.0000, default: 0.2500)

Tint amount

Amount of color

Transparency

The transparency value

PhaseIncrement

Phase increment

Zoomrate=<number> (0.0000..1.0000, default: 1.0100)

Zoomrate

Zoomrate

<r>, <g> and <b> are in the range 0.0..1.0

splash

make a big splash in the center

physics=<number> (0.0000..1.0000, default: 0.0000)

physics

water density: from 1 to 4

rain=[1|0] (default: 0)

rain

rain drops all over

distort=[1|0] (default: 0)

distort

distort all surface like dropping a bucket to the floor

smooth=[1|0] (default: 0)

smooth

smooth up all perturbations on the surface

surfer=[1|0] (default: 0)

surfer

surf the surface with a wandering finger

swirl=[1|0] (default: 0)

swirl

swirling whirpool in the center

randomize_swirl=[1|0] (default: 0)

randomize_swirl

randomize the swirling angle

<r>, <g> and <b> are in the range 0.0..1.0

Neutral Color

Choose a color from the source image that should be white.

GreenTint=<number> (0.0000..1.0000, default: 1.2000)

Green Tint

Adjust the level of green.

Display

Displayinputalpha=[1|0] (default: 0)

Display input alpha

Operation=<number> (0.0000..1.0000, default: 0.0000)

Operation

Threshold=<number> (0.0000..1.0000, default: 0.5000)

Threshold

Shrink/growamount=<number> (0.0000..1.0000, default: 0.3333)

Shrink/grow amount

Invert=[1|0] (default: 0)

Invert

Position

Transitionwidth=[1|0] (default: 0)

Transition width

Tilt=<number> (0.0000..1.0000, default: 0.5000)

Tilt

Min=<number> (0.0000..1.0000, default: 0.0000)

Min

Max=<number> (0.0000..1.0000, default: 1.0000)

Max

Operation=<number> (0.0000..1.0000, default: 0.0000)

Operation

Shape

PositionX=<number> (0.0000..1.0000, default: 0.5000)

Position X

PositionY=<number> (0.0000..1.0000, default: 0.5000)

Position Y

SizeX=<number> (0.0000..1.0000, default: 0.1000)

Size X

SizeY=<number> (0.0000..1.0000, default: 0.1000)

Size Y

Tilt=<number> (0.0000..1.0000, default: 0.5000)

Tilt

Transitionwidth=<number> (0.0000..1.0000, default: 0.2000)

Transition width

Min=<number> (0.0000..1.0000, default: 0.0000)

Min

Max=<number> (0.0000..1.0000, default: 1.0000)

Max

Operation=<number> (0.0000..1.0000, default: 0.0000)

Operation

<r>, <g> and <b> are in the range 0.0..1.0

Color

The color to make transparent (B G R)

Distance=<number> (0.0000..1.0000, default: 127.0000)

Distance

Distance to Color (127 is good)

Corner 1 X

X coordinate of corner 1

Corner1Y=<number> (0.0000..1.0000, default: 0.3333)

Corner 1 Y

Y coordinate of corner 1

Corner2X=<number> (0.0000..1.0000, default: 0.6667)

Corner 2 X

X coordinate of corner 2

Corner2Y=<number> (0.0000..1.0000, default: 0.3333)

Corner 2 Y

Y coordinate of corner 2

Corner3X=<number> (0.0000..1.0000, default: 0.6667)

Corner 3 X

X coordinate of corner 3

Corner3Y=<number> (0.0000..1.0000, default: 0.6667)

Corner 3 Y

Y coordinate of corner 3

Corner4X=<number> (0.0000..1.0000, default: 0.3333)

Corner 4 X

X coordinate of corner 4

Corner4Y=<number> (0.0000..1.0000, default: 0.6667)

Corner 4 Y

Y coordinate of corner 4

EnableStretch=[1|0] (default: 0)

Enable Stretch

Enable stretching

StretchX=<number> (0.0000..1.0000, default: 0.5000)

Stretch X

Amount of stretching in X direction

StretchY=<number> (0.0000..1.0000, default: 0.5000)

Stretch Y

Amount of stretching in Y direction

Interpolator=<number> (0.0000..1.0000, default: 0.1667)

Interpolator

Quality of interpolation

TransparentBackground=[1|0] (default: 0)

Transparent Background

Makes background transparent

FeatherAlpha=<number> (0.0000..1.0000, default: 0.0100)

Feather Alpha

Makes smooth transition into transparent

R

Amount of red

G=<number> (0.0000..1.0000, default: 0.5000)

G

Amount of green

B=<number> (0.0000..1.0000, default: 0.5000)

B

Amount of blue

Action=<number> (0.0000..1.0000, default: 0.3333)

Action

Type of color adjustment

Keepluma=[1|0] (default: 1)

Keep luma

Don't change brightness

Alphacontrolled=[1|0] (default: 0)

Alpha controlled

Adjust only areas with nonzero alpha

Lumaformula=<number> (0.0000..1.0000, default: 0.5000)

Luma formula

DelayTime

the delay time

HSync

the hsync offset

BlockSizeX

Horizontal size of one "pixel"

BlockSizeY=<number> (0.0000..1.0000, default: 0.4375)

BlockSizeY

Vertical size of one "pixel"

Measurement

What measurement to display

X=<number> (0.0000..1.0000, default: 0.5000)

X

X position of probe

Y=<number> (0.0000..1.0000, default: 0.5000)

Y

Y position of probe

Xsize=<number> (0.0000..1.0000, default: 0.2500)

X size

X size of probe

Ysize=<number> (0.0000..1.0000, default: 0.2500)

Y size

Y size of probe

256scale=[1|0] (default: 0)

256 scale

use 0-255 instead of 0.0-1.0

Showalpha=[1|0] (default: 0)

Show alpha

Display alpha value too

Bigwindow=[1|0] (default: 0)

Big window

Display more data

X

X position of profile

Y=<number> (0.0000..1.0000, default: 0.5000)

Y

Y position of profile

Tilt=<number> (0.0000..1.0000, default: 0.5000)

Tilt

Tilt of profile

Length=<number> (0.0000..1.0000, default: 0.1584)

Length

Length of profile

Channel=<number> (0.0000..1.0000, default: 0.3750)

Channel

Channel to numerically display

Marker1=<number> (0.0000..1.0000, default: -0.2000)

Marker 1

Position of marker 1

Marker2=<number> (0.0000..1.0000, default: -0.2000)

Marker 2

Position of marker 2

Rtrace=[1|0] (default: 1)

R trace

Show R trace on scope

Gtrace=[1|0] (default: 1)

G trace

Show G trace on scope

Btrace=[1|0] (default: 1)

B trace

Show B trace on scope

Ytrace=[1|0] (default: 0)

Y trace

Show Y' trace on scope

Prtrace=[1|0] (default: 0)

Pr trace

Show Pr trace on scope

Pbtrace=[1|0] (default: 0)

Pb trace

Show Pb trace on scope

Alphatrace=[1|0] (default: 0)

Alpha trace

Show Alpha trace on scope

Displayaverage=[1|0] (default: 1)

Display average

e

DisplayRMS=[1|0] (default: 1)

Display RMS

Displayminimum=[1|0] (default: 0)

Display minimum

Displaymaximum=[1|0] (default: 0)

Display maximum

256scale=[1|0] (default: 0)

256 scale

use 0-255 instead of 0.0-1.0

Color=<number> (0.0000..1.0000, default: 0.0000)

Color

rec 601 or rec 709

Crosshaircolor=<number> (0.0000..1.0000, default: 0.0000)

Crosshair color

Color of the profile marker

Factor

influence of mean px value. > 32 = 0

<r>, <g> and <b> are in the range 0.0..1.0

Color to select

Invertselection=[1|0] (default: 0)

Invert selection

DeltaR/A/Hue=<number> (0.0000..1.0000, default: 0.2000)

Delta R / A / Hue

DeltaG/B/Chroma=<number> (0.0000..1.0000, default: 0.2000)

Delta G / B / Chroma

DeltaB/I/I=<number> (0.0000..1.0000, default: 0.2000)

Delta B / I / I

Selectionsubspace=<number> (0.0000..1.0000, default: 0.0000)

Selection subspace

Subspaceshape=<number> (0.0000..1.0000, default: 0.0000)

Subspace shape

Edgemode=<number> (0.0000..1.0000, default: 0.0000)

Edge mode

Operation=<number> (0.0000..1.0000, default: 0.0000)

Operation

Auto resize window

disable_xscreensaver_normal=[1|0] (default: 0)

Disable Screensaver for normal playback

disable_xscreensaver_fullscreen=[1|0] (default: 1)

Disable Screensaver for fullscreen playback

force_hw_scale=[1|0] (default: 1)

Force hardware scaling

Use hardware scaling even if it involves more CPU intensive pixelformat conversions

background_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)

<r>, <g> and <b> are in the range 0.0..1.0

Background color

Specify the background color for videos with alpha channel. This is only used by the OpenGL driver.

scale_mode=<string>

Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell cubic_catmull sinc_lanczos

Default: auto

Scale mode

Choose scaling method. Auto means to choose based on the conversion quality. Nearest is fastest, Sinc with Lanczos window is slowest.

scale_order=<number> (4..1000, default: 4)

Scale order

Order for sinc scaling

scale_quality=<number> (1..5, default: 2)

Scale quality

Scale quality

Supported options: /dev/video0

Default: /dev/video0

V4L2 Device

force_rw=[1|0] (default: 1)

Force write

Don't use memory mapping

Write info chunk

bits=<string>

Supported strings: 8 16 24 32

Default: 16

Bits per sample

Supported strings: vbr vbr_bitrate managed

Default: VBR

Bitrate mode

Bitrate mode: VBR: You specify a quality and (optionally) a minimum and maximum bitrate VBR (bitrate): The specified nominal bitrate will be used for selecting the encoder mode. Managed: You specify a nominal bitrate and (optionally) a minimum and maximum bitrate VBR is recommended, managed bitrate might result in a worse quality

nominal_bitrate=<number> (0..1000, default: 128)

Nominal bitrate (kbps)

Nominal bitrate (in kbps) for managed mode

quality=<number> (0.0..10.0, default: 3.0)

VBR Quality (10: best)

Quality for VBR mode 10: best (largest output file) 0: worst (smallest output file)

min_bitrate=<number> (0..1000, default: 0)

Minimum bitrate (kbps)

Optional minimum bitrate (in kbps) 0 = unspecified

max_bitrate=<number> (0..1000, default: 0)

Maximum bitrate (kbps)

Optional maximum bitrate (in kbps) 0 = unspecified

Supported strings: auto nb wb uwb

Default: auto

Speex mode

Encoding mode. If you select Auto, the mode will be taken from the samplerate.

quality=<number> (0..10, default: 3)

Quality (10: best)

complexity=<number> (0..10, default: 3)

Encoding complexity

nframes=<number> (1..10, default: 1)

Frames per Ogg packet

bitrate=<number> (0..128, default: 8)

Bitrate (kbps)

Bitrate (in kbps). Set to 0 for seleting the standard bitrates for the encoding mode.

vbr=[1|0] (default: 0)

Variable bitrate

abr_bitrate=<number> (0..128, default: 0)

Average bitrate (kbps)

Average bitrate (in kbps). Set to 0 for disabling ABR.

vad=[1|0] (default: 0)

Use voice activity detection

dtx=[1|0] (default: 0)

Enable file-based discontinuous transmission

Supported strings: 8 12 16 20 24

Default: 16

Bits

compression_level=<number> (0..8, default: 5)

Compression Level

0: Fastest encoding, biggest files 8: Slowest encoding, smallest files

Write vorbis comment

Write Vorbis comment containing metadata to the file

use_seektable=[1|0] (default: 1)

Write seek table

Write seektable (strongly recommended)

num_seektable_entries=<number> (1..1000000, default: 100)

Entries in the seektable

Maximum number of entries in the seek table. Default is 100, larger numbers result in shorter seeking times but also in larger files.

bits=<string>

Supported strings: 8 12 16 20 24

Default: 16

Bits

compression_level=<number> (0..8, default: 5)

Compression Level

0: Fastest encoding, biggest files 8: Slowest encoding, smallest files

Write ID3V1.1 tag

do_id3v2=[1|0] (default: 1)

Write ID3V2 tag

id3v2_charset=<string>

Supported strings: 0 1 2 3

Default: 3

ID3V2 Encoding

bitrate_mode=<string>

Supported strings: CBR ABR VBR

Default: CBR

Bitrate mode

stereo_mode=<string>

Supported strings: Stereo Joint stereo Auto

Default: Auto

Stereo mode

Stereo: Completely independent channels Joint stereo: Improve quality (save bits) by using similarities of the channels Auto (recommended): Select one of the above depending on quality or bitrate setting

quality=<number> (0..9, default: 2)

Encoding speed

0: Slowest encoding, best quality 9: Fastest encoding, worst quality

cbr_bitrate=<number> (8..320, default: 128)

Bitrate (kbps)

Bitrate in kbps. If your selection is no valid mp3 bitrate, we'll choose the closest value.

vbr_quality=<number> (0..9, default: 4)

VBR Quality

VBR Quality level. 0: best, 9: worst

abr_bitrate=<number> (8..320, default: 128)

ABR overall bitrate (kbps)

Average bitrate for ABR mode

abr_min_bitrate=<number> (0..320, default: 0)

ABR min bitrate (kbps)

Minimum bitrate for ABR mode. 0 means let lame decide. If your selection is no valid mp3 bitrate, we'll choose the closest value.

abr_max_bitrate=<number> (0..320, default: 0)

ABR max bitrate (kbps)

Maximum bitrate for ABR mode. 0 means let lame decide. If your selection is no valid mp3 bitrate, we'll choose the closest value.

Write ID3V1.1 tag

do_id3v2=[1|0] (default: 1)

Write ID3V2 tag

id3v2_charset=<string>

Supported strings: 0 1 2 3

Default: 3

ID3V2 Encoding

object_type=<string>

Supported strings: mpeg2_main mpeg2_lc mpeg4_main mpeg4_lc mpeg4_ltp

Default: mpeg4_main

Object type

bitrate=<number> (0..1000, default: 0)

Bitrate (kbps)

Average bitrate (0: VBR based on quality)

quality=<number> (10..500, default: 100)

Quality

Quantizer quality

block_types=<string>

Supported strings: Both No short No long

Default: Both

Block types

tns=[1|0] (default: 0)

Use temporal noise shaping

no_midside=[1|0] (default: 0)

Don't use mid/side coding

Bitrate (kbps)

layer=<number> (1..2, default: 2)

Layer (1 or 2)

Audio layer

vcd=[1|0] (default: 1)

VCD Compatible

Make VCD compliant output. This forces layer II, 224 kbps and 44.1 KHz stereo

Supported strings: au ac3 aiff mp2 asf

Default: au

Format

codec=option[{suboptions}]

Supported options: pcm_mulaw pcm_s16be pcm_alaw ac3 pcm_s8 mp2 wma2 wma1

Default: pcm_mulaw

Codec

Suboptions for codec=ac3

Suboptions for codec=mp2

Suboptions for codec=wma2

Suboptions for codec=wma1

Server

port=<number> (1..65535, default: 8000)

Port

mount=<string> (Default: /stream.ogg)

Mount

user=<string> (Default: source)

User

password=<string>

Password

name=<string> (Default: Test stream)

Name

description=<string> (Default: Brought to you by gmerlin)

Description

stereo_mode=<string>

Supported strings: Stereo Joint stereo Auto

Default: Auto

Stereo mode

Stereo: Completely independent channels Joint stereo: Improve quality (save bits) by using similarities of the channels Auto (recommended): Select one of the above depending on quality or bitrate setting

quality=<number> (0..9, default: 2)

Encoding speed

0: Slowest encoding, best quality 9: Fastest encoding, worst quality

cbr_bitrate=<number> (8..320, default: 128)

Bitrate (kbps)

Bitrate in kbps. If your selection is no valid mp3 bitrate, we'll choose the closest value.

Supported strings: quicktime avi avi_opendml mp4 m4a 3gp

Default: quicktime

Format

make_streamable=[1|0] (default: 0)

Make streamable

Make the file streamable afterwards (uses twice the diskspace)

max_riff_size=<number> (1..1024, default: 1024)

Maximum RIFF size

Maximum RIFF size (in MB) for OpenDML AVIs. The default (1GB) is reasonable and should only be changed by people who know what they do.

codec=option[{suboptions}]

Supported options: ima4 rawaudio twos ulaw sowt alaw in24 in32 fl32 fl64 lpcm vorbis vorbis_qt ffmpeg_mp2 ffmpeg_ac3 lame faac

Default: ima4

Codec

Suboptions for codec=in24

Suboptions for codec=in32

Suboptions for codec=fl32

Suboptions for codec=fl64

Suboptions for codec=lpcm

Suboptions for codec=vorbis

Suboptions for codec=vorbis_qt

Suboptions for codec=ffmpeg_mp2

Suboptions for codec=ffmpeg_ac3

Suboptions for codec=lame

Suboptions for codec=faac

box_top=<number> (0..65535, default: 0)

Text box (top)

box_left=<number> (0..65535, default: 0)

Text box (left)

box_bottom=<number> (0..65535, default: 0)

Text box (bottom)

box_right=<number> (0..65535, default: 0)

Text box (right)

fg_color=<r>,<g>,<b>,<a> (default: 1.000,1.000,1.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Text color

bg_color=<r>,<g>,<b>,<a> (default: 0.000,0.000,0.000,1.000)

<r>, <g>, <b> and <a> are in the range 0.0..1.0

Background color

default_timescale=<number> (default: 25)

Default timescale

For formats, which support only constant framerates, set the default timescale here

default_frame_duration=<number> (default: 1)

Default frame duration

For formats, which support only constant framerates, set the default frame duration here

codec=option[{suboptions}]

Supported options: raw v308 v408 v410 yuv2 yuv4 yv12 2vuy v210 rtjpeg jpeg mjpa png ffmpeg_mpg4 ffmpeg_msmpeg4v3 ffmpeg_msmpeg4v3_wmp ffmpeg_h263 ffmpeg_h263p ffmpeg_mjpg ffmpeg_rle ffmpeg_dv ffmpeg_dvcpro ffmpeg_dv50 ffmpeg_ffvhuff ffmpeg_ffv1 ffmpeg_dnxhd ffmpeg_imx x264 schroedinger yuvs

Default: raw

Codec

Suboptions for codec=rtjpeg

Suboptions for codec=jpeg

Suboptions for codec=mjpa

Suboptions for codec=png

Suboptions for codec=ffmpeg_mpg4

Suboptions for codec=ffmpeg_msmpeg4v3

Suboptions for codec=ffmpeg_msmpeg4v3_wmp

Suboptions for codec=ffmpeg_h263