CYCBUFF.CONF(5) | InterNetNews Documentation | CYCBUFF.CONF(5) |
cycbuff.conf - Configuration file for INN CNFS storage method
This file defines the cyclical buffers that make up the storage pools for CNFS (Cyclic News File System). Some options controlling the behavior of the CNFS storage system can also be set here. cycbuff.conf is required if the CNFS (Cyclic News File System) storage method is used. INN will look for it in pathetc (as set in inn.conf).
CNFS stores articles in logical objects called metacycbuffs. Each metacycbuff is in turn composed of one or more physical buffers called cycbuffs. As articles are written to the metacycbuff, each article is written to the next cycbuff in the list in a round-robin fashion (unless "sequential" mode is specified, in which case each cycbuff is filled before moving on to the next). This is so that you can distribute the individual cycbuffs across multiple physical disks and balance the load between them. Note that in order to use any cycbuff larger than 2 GB on 32-bit platforms (and some very rare 64-bit platforms that aren't Linux), you need to build INN with the --enable-largefiles option.
For information about how to configure INN to use CNFS, see storage.conf(5).
Blank lines and lines beginning with a hash sign ("#") are ignored. All other lines must be of one of the following forms:
cycbuffupdate:<interval> refreshinterval:<interval> cycbuff:<name>:<file>:<size> metacycbuff:<name>:<buffer>[,<buffer>,...][:<mode>]
(where items enclosed in [] are optional). Order is mostly not significant, but all cycbuff lines must occur before all metacycbuff lines. Long lines can be continued on the next line by ending the line with a backslash ("\").
If you're trying to stay under 2 GB, keep your sizes below 2097152.
<name> is the symbolic name of the metacycbuff, referred to in the options: field of "cnfs" entries in storage.conf. It must be no longer than eight characters. <buffer> is the name of a cycbuff (the <name> part of a cycbuff line), and any number of cycbuffs may be specified, separated by commas.
If there is more than one cycbuff in a metacycbuff, there are two ways that INN can distribute articles between the cycbuffs. The default mode, "INTERLEAVE", stores the articles in each cycbuff in a round-robin fashion, one article per cycbuff in the order listed. If the cycbuffs are of wildly different sizes, this can cause some of them to roll over much faster than others, and it may not give the best performance depending on your disk layout. The other storage mode, "SEQUENTIAL", instead writes to each cycbuff in turn until that cycbuff is full and then moves on to the next one, returning to the first and starting a new cycle when the last one is full. To specify a mode rather than leaving it at the default, add a colon and the mode ("INTERLEAVE" or "SEQUENTIAL") at the end of the metacycbuff line.
innd only reads cycbuff.conf on startup, so if you change anything in this file and want innd to pick up the changes, you have to use "ctlinnd xexec innd"; "ctlinnd reload all ''" is not sufficient.
When articles are stored, the cycbuff into which they're stored is saved as part of the article token. In order for INN to retrieve articles from a cycbuff, that cycbuff must be listed in cycbuff.conf. However, if INN should not write to a cycbuff, it doesn't need to be (and shouldn't be) listed in a metacycbuff.
This provides an easy way to retire a cycbuff. Just remove it from its metacycbuff, leaving in the cycbuff line, and restart innd (with, for example, "ctlinnd xexec innd"). No new articles will be put into the cycbuff, but neither will any articles expire from it. After you no longer need the articles in the cycbuff, just remove it entirely from cycbuff.conf. Then all of the articles will appear to have been deleted to INN, and the next nightly expire run will clean up any remaining references to them.
Adding a new cycbuff just requires creating it (see below), adding a cycbuff line, adding it to a metacycbuff, and then restarting innd. Similarly, changing the allocation of an existing cycbuff from a metacycbuff to another one just requires modifying the two metacycbuffs accordingly, and then restarting innd. (Only the cycbuff is noted noted in the storage API tokens.)
When creating a new cycbuff, there are two different methods for creating the buffers in which the articles will be stored.
dd if=/dev/zero of=/path/to/cycbuff bs=1024 count=<size>
where <size> is the size from the cycbuff line in cycbuff.conf. INSTALL contains a script that will generate these commands for you from your cycbuff.conf file.
This is the simplest method, but has the disadvantage that very large files on regular file systems can be fairly slow to access, particularly at the end of the file, and INN incurs unnecessary file system overhead when accessing the cycbuff.
Note that some OSes do not support files larger than 2 GB, which will limit the size you can make a single cycbuff, but you can still combine many cycbuffs into each metacycbuff. Very old versions of Linux (before 2.4 kernels, that raised the limit to 2 TB) are known to have this limitation; FreeBSD does not. Some OSes that support large files don't support direct access to block devices for large partitions (Solaris prior to Solaris 7, or not running in 64-bit mode, is in this category); on those OSes, if you want cycbuffs over 2 GB, you'll have to use regular files. If in doubt, keep your cycbuffs smaller than 2 GB.
Partition the disk to make each partition equal to or smaller than 2 GB. If you're using Solaris, set up your partitions to avoid the first cylinder of the disk (or otherwise the cycbuff header will overwrite the disk partition table and render the cycbuffs inaccessible). Then, create device files for each block device you're going to use.
It's not recommended to use the block device files in /dev, since the news system doesn't have permission to write to them and changing the permissions of the system device files may affect something else. Instead, use mknod(1) to create a new set of block devices (in somewhere like pathspool/cycbuffs that's only writable by the news user). To do this, run "ls -Ll" on the devices in /dev that correspond to the block devices that you want to use. The major and minor device numbers are in the fifth and sixth columns (right before the date), respectively. Then run mknod like:
mknod <file> b <major> <minor>
where <file> is the path to the device to create (matching the <file> part of the cycbuff line) and <major> and <minor> are the major and minor device numbers as discovered above.
Here's a short script to do this when given the path to the system device file as an argument:
#!/bin/sh base=`echo "$1" | sed 's%.*/%%'` major=`ls -Ll "$1" | awk '{print $5}' | tr -d ,` minor=`ls -Ll "$1" | awk '{print $6}` mkdir -p <pathspool in inn.conf>/cycbuffs mknod <pathspool>/cycbuffs/"$base" b "$major" "$minor" chown news:news <pathspool>/cycbuffs/"$base" chmod 644 <pathspool>/cycbuffs/"$base"
Make sure that the created files are owned by the news user and news group, as specified at configure time (the default being "news" for both). Also make sure that the permissions on the devices allow the news user to read and write, and if you want other users on the system to be able to use sm to retrieve articles, make sure they're world-readable.
Once you have everything configured properly and you start innd, you should see messages in news.notice that look like:
innd: CNFS: no magic cookie found for cycbuff ONE, initializing
where "ONE" will be whatever you called your cycbuff.
Written by Katsuhiro Kondou <kondou@nec.co.jp> for InterNetNews. Rewritten into POD by Russ Allbery <eagle@eyrie.org>.
$Id: cycbuff.conf.pod 10230 2018-01-28 21:22:21Z iulius $
2018-01-28 | INN 2.6.3 |