ipmiutil_hpm - PICMG HPM.1 Upgrade Agent
ipmiutil hpm [-mxNUPREFJTVY] parameters
This ipmiutil hpm subcommand updates HPM components using
PICMG HPM.1 file
This utility can use either the /dev/ipmi0 driver from OpenIPMI,
the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct
user-space IOs, or the IPMI LAN interface if -N.
Command line options are described below.
- -m 002000
- Target a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for
PICMG or ATCA blade systems. The trailing character, if present, indicates
SMI addressing if 's', or IPMB addressing if 'i' or not present.
- -x
- Causes extra debug messages to be displayed.
- -N nodename
- Nodename or IP address of the remote target system. If a nodename is
specified, IPMI LAN interface is used. Otherwise the local system
management interface is used.
- -U rmt_user
- Remote username for the nodename given. The default is a null
username.
- -P/-R rmt_pswd
- Remote password for the nodename given. The default is a null
password.
- -E
- Use the remote password from Environment variable IPMI_PASSWORD.
- -F drv_t
- Force the driver type to one of the followng: imb, va, open, gnu, landesk,
lan, lan2, lan2i, kcs, smb. Note that lan2i means lan2 with intelplus. The
default is to detect any available driver type and use it.
- -J
- Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128,
4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none, ...
14=md5/md5/xrc4_40. Default is 3.
- -T
- Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5,
4=Straight Password, 5=OEM.
- -V
- Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level,
3=Operator level, 4=Administrator level (default), 5=OEM level.
- -Y
- Yes, do prompt the user for the IPMI LAN remote password. Alternatives for
the password are -E or -P.
hpm parameters
- check
-
Check the target information.
- check
filename
-
Display both the existing target version and image version on the screen.
- download
filename
-
Download specified firmware.
- upgrade
filename [all] [component x] [activate]
-
Upgrade the firmware using a valid HPM.1 image file. If no option is
specified, the firmware versions are checked first and the firmware is
upgraded only if they are different.
- all
-
Upgrade all components even if the firmware versions are the same (use this
only after using "check" command).
- component
x
-
Upgrade only given component from the given file.
component 0 - BOOT
component 1 - RTK
- activate
-
Activate new firmware right away.
- activate
-
Activate the newly uploaded firmware.
- targetcap
-
Get the target upgrade capabilities.
- compprop
id opt
-
Get the specified component properties. Valid component id: 0-7.
Opt can be one of following:
0 - General properties
1 - Current firmware version
2 - Description string
3 - Rollback firmware version
4 - Deferred firmware version
- abort
-
Abort the on-going firmware upgrade.
- upgstatus
-
Show status of the last long duration command.
- rollback
-
Perform manual rollback on the IPM Controller firmware.
- rollbackstatus
-
Show the rollback status.
- selftestresult
-
Query the self test results.
ipmiutil hpm targetcap
Gets HPM target capabilities
ipmiutil hpm -N 192.168.1.1 -U root -P pswd download firmware.img
Downloads the HPM firmware version contained in firmware.img over IPMI
LAN.
See http://ipmiutil.sourceforge.net/ for the latest version of
ipmiutil and any bug fix list.
Copyright (C) 2010 Kontron America, Inc.
See the file COPYING in the distribution for more details
regarding redistribution.
This utility is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY.
Andy Cress <arcress at users.sourceforge.net>