DOKK / manpages / debian 10 / libcoap-1-0-bin / coap-server.5.en
COAP-SERVER(5) coap-server Manual COAP-SERVER(5)

coap-server - CoAP Server based on libcoap

coap-server [-A addr] [-g group] [-p port] [-v num]

coap-server is a CoAP server which simulate 6LoWPAN devices which can be addressed via the CoAP protocol.

-A addr

The local address of the interface which the server has to listen.

-g group

Join specified multicast group on startup.

-p port

The port on the given address the server will be waitung for connections. The default port is 5683 if not given any other value.

-v num

The verbosity level to use (default: 3, maximum is 9).

•Example

coap-server -A ::1

Let the server listen on localhost (port 5683).

•Example

coap-server -A ::1 -p 13011

Quite the same, except listening port is 13011 (and not the default port 5683).

•Example

coap-server -A 2001:db8:81a8:0:6ef0:dead:feed:beef  -v 5

The listening address is set to 2001:db8:81a8:0:6ef0:dead:feed:beef and the verbosity level is set to 5.

•Example

coap-server -A 2001:db8:81a8:0:6ef0:dead:feed:beef  -g FF02:FD

Set listening address to 2001:db8:81a8:0:6ef0:dead:feed:beef and join the All CoAP Nodes multicast group FF02:FD.

There are no configuration files.

0

Success

1

Failure (syntax or usage error; configuration error; document processing failure; unexpected error)

Please report bugs on the mailing list for libcoap: libcoap-developers@lists.sourceforge.net

The libcoap project <libcoap-developers@lists.sourceforge.net>

2017-02-05 coap-server 4.1.2