DOKK / manpages / debian 10 / libinput-tools / libinput-measure-touch-size.1.en
libinput-measure-touch-size(1) General Commands Manual libinput-measure-touch-size(1)

libinput-measure-touch-size - measure touch size and orientation of devices

libinput measure touch-size [--help] [options] [/dev/input/event0]

The libinput measure touch-size tool measures the size and orientation of a touch as provided by the kernel. This is an interactive tool. When executed, the tool will prompt the user to interact with the touch device. On termination, the tool prints a summary of the values seen. This data should be attached to any touch-size-related bug report.

This is a debugging tool only, its output may change at any time. Do not rely on the output.

This tool usually needs to be run as root to have access to the /dev/input/eventX nodes.

If a device node is given, this tool opens that device node. Otherwise, this tool searches for the first node that looks like a touch-capable device and uses that node.

Print help
Set the logical touch size thresholds to down and up, respectively. When a touch exceeds the size in down it is considered logically down. If a touch is logically down and goes below the size in up, it is considered logically up. The thresholds have to be in device-specific pressure values and it is required that down >= up.
Assume a palm threshold of N. The threshold has to be in device-specific pressure values.

If the touch-thresholds or the palm-threshold are not provided, this tool uses the thresholds provided by the device quirks (if any) or the built-in defaults.

Part of the libinput(1) suite