DOKK / manpages / debian 10 / libjemalloc-dev / jemalloc.3.en
JEMALLOC(3) User Manual JEMALLOC(3)

jemalloc - general purpose memory allocation functions

This manual describes jemalloc 5.1.0-0-g61efbda7098de6fe64c362d309824864308c36d4. More information can be found at the jemalloc website[1].

#include <jemalloc/jemalloc.h>

Standard API

void *malloc(size_t size);

void *calloc(size_t number, size_t size);

int posix_memalign(void **ptr, size_t alignment, size_t size);

void *aligned_alloc(size_t alignment, size_t size);

void *realloc(void *ptr, size_t size);

void free(void *ptr);

Non-standard API

void *mallocx(size_t size, int flags);

void *rallocx(void *ptr, size_t size, int flags);

size_t xallocx(void *ptr, size_t size, size_t extra, int flags);

size_t sallocx(void *ptr, int flags);

void dallocx(void *ptr, int flags);

void sdallocx(void *ptr, size_t size, int flags);

size_t nallocx(size_t size, int flags);

int mallctl(const char *name, void *oldp, size_t *oldlenp, void *newp, size_t newlen);

int mallctlnametomib(const char *name, size_t *mibp, size_t *miblenp);

int mallctlbymib(const size_t *mib, size_t miblen, void *oldp, size_t *oldlenp, void *newp, size_t newlen);

void malloc_stats_print(void (*write_cb) (void *, const char *), void *cbopaque, const char *opts);

size_t malloc_usable_size(const void *ptr);

void (*malloc_message)(void *cbopaque, const char *s);

const char *malloc_conf;

Standard API

The malloc() function allocates size bytes of uninitialized memory. The allocated space is suitably aligned (after possible pointer coercion) for storage of any type of object.

The calloc() function allocates space for number objects, each size bytes in length. The result is identical to calling malloc() with an argument of number * size, with the exception that the allocated memory is explicitly initialized to zero bytes.

The posix_memalign() function allocates size bytes of memory such that the allocation's base address is a multiple of alignment, and returns the allocation in the value pointed to by ptr. The requested alignment must be a power of 2 at least as large as sizeof(void *).

The aligned_alloc() function allocates size bytes of memory such that the allocation's base address is a multiple of alignment. The requested alignment must be a power of 2. Behavior is undefined if size is not an integral multiple of alignment.

The realloc() function changes the size of the previously allocated memory referenced by ptr to size bytes. The contents of the memory are unchanged up to the lesser of the new and old sizes. If the new size is larger, the contents of the newly allocated portion of the memory are undefined. Upon success, the memory referenced by ptr is freed and a pointer to the newly allocated memory is returned. Note that realloc() may move the memory allocation, resulting in a different return value than ptr. If ptr is NULL, the realloc() function behaves identically to malloc() for the specified size.

The free() function causes the allocated memory referenced by ptr to be made available for future allocations. If ptr is NULL, no action occurs.

Non-standard API

The mallocx(), rallocx(), xallocx(), sallocx(), dallocx(), sdallocx(), and nallocx() functions all have a flags argument that can be used to specify options. The functions only check the options that are contextually relevant. Use bitwise or (|) operations to specify one or more of the following:

MALLOCX_LG_ALIGN(la)

Align the memory allocation to start at an address that is a multiple of (1 << la). This macro does not validate that la is within the valid range.

MALLOCX_ALIGN(a)

Align the memory allocation to start at an address that is a multiple of a, where a is a power of two. This macro does not validate that a is a power of 2.

MALLOCX_ZERO

Initialize newly allocated memory to contain zero bytes. In the growing reallocation case, the real size prior to reallocation defines the boundary between untouched bytes and those that are initialized to contain zero bytes. If this macro is absent, newly allocated memory is uninitialized.

MALLOCX_TCACHE(tc)

Use the thread-specific cache (tcache) specified by the identifier tc, which must have been acquired via the tcache.create mallctl. This macro does not validate that tc specifies a valid identifier.

MALLOCX_TCACHE_NONE

Do not use a thread-specific cache (tcache). Unless MALLOCX_TCACHE(tc) or MALLOCX_TCACHE_NONE is specified, an automatically managed tcache will be used under many circumstances. This macro cannot be used in the same flags argument as MALLOCX_TCACHE(tc).

MALLOCX_ARENA(a)

Use the arena specified by the index a. This macro has no effect for regions that were allocated via an arena other than the one specified. This macro does not validate that a specifies an arena index in the valid range.

The mallocx() function allocates at least size bytes of memory, and returns a pointer to the base address of the allocation. Behavior is undefined if size is 0.

The rallocx() function resizes the allocation at ptr to be at least size bytes, and returns a pointer to the base address of the resulting allocation, which may or may not have moved from its original location. Behavior is undefined if size is 0.

The xallocx() function resizes the allocation at ptr in place to be at least size bytes, and returns the real size of the allocation. If extra is non-zero, an attempt is made to resize the allocation to be at least (size + extra) bytes, though inability to allocate the extra byte(s) will not by itself result in failure to resize. Behavior is undefined if size is 0, or if (size + extra > SIZE_T_MAX).

The sallocx() function returns the real size of the allocation at ptr.

The dallocx() function causes the memory referenced by ptr to be made available for future allocations.

The sdallocx() function is an extension of dallocx() with a size parameter to allow the caller to pass in the allocation size as an optimization. The minimum valid input size is the original requested size of the allocation, and the maximum valid input size is the corresponding value returned by nallocx() or sallocx().

The nallocx() function allocates no memory, but it performs the same size computation as the mallocx() function, and returns the real size of the allocation that would result from the equivalent mallocx() function call, or 0 if the inputs exceed the maximum supported size class and/or alignment. Behavior is undefined if size is 0.

The mallctl() function provides a general interface for introspecting the memory allocator, as well as setting modifiable parameters and triggering actions. The period-separated name argument specifies a location in a tree-structured namespace; see the MALLCTL NAMESPACE section for documentation on the tree contents. To read a value, pass a pointer via oldp to adequate space to contain the value, and a pointer to its length via oldlenp; otherwise pass NULL and NULL. Similarly, to write a value, pass a pointer to the value via newp, and its length via newlen; otherwise pass NULL and 0.

The mallctlnametomib() function provides a way to avoid repeated name lookups for applications that repeatedly query the same portion of the namespace, by translating a name to a “Management Information Base” (MIB) that can be passed repeatedly to mallctlbymib(). Upon successful return from mallctlnametomib(), mibp contains an array of *miblenp integers, where *miblenp is the lesser of the number of components in name and the input value of *miblenp. Thus it is possible to pass a *miblenp that is smaller than the number of period-separated name components, which results in a partial MIB that can be used as the basis for constructing a complete MIB. For name components that are integers (e.g. the 2 in arenas.bin.2.size), the corresponding MIB component will always be that integer. Therefore, it is legitimate to construct code like the following:

unsigned nbins, i;
size_t mib[4];
size_t len, miblen;
len = sizeof(nbins);
mallctl("arenas.nbins", &nbins, &len, NULL, 0);
miblen = 4;
mallctlnametomib("arenas.bin.0.size", mib, &miblen);
for (i = 0; i < nbins; i++) {
	size_t bin_size;
	mib[2] = i;
	len = sizeof(bin_size);
	mallctlbymib(mib, miblen, (void *)&bin_size, &len, NULL, 0);
	/* Do something with bin_size... */
}

The malloc_stats_print() function writes summary statistics via the write_cb callback function pointer and cbopaque data passed to write_cb, or malloc_message() if write_cb is NULL. The statistics are presented in human-readable form unless “J” is specified as a character within the opts string, in which case the statistics are presented in JSON format[2]. This function can be called repeatedly. General information that never changes during execution can be omitted by specifying “g” as a character within the opts string. Note that malloc_message() uses the mallctl*() functions internally, so inconsistent statistics can be reported if multiple threads use these functions simultaneously. If --enable-stats is specified during configuration, “m”, “d”, and “a” can be specified to omit merged arena, destroyed merged arena, and per arena statistics, respectively; “b” and “l” can be specified to omit per size class statistics for bins and large objects, respectively; “x” can be specified to omit all mutex statistics. Unrecognized characters are silently ignored. Note that thread caching may prevent some statistics from being completely up to date, since extra locking would be required to merge counters that track thread cache operations.

The malloc_usable_size() function returns the usable size of the allocation pointed to by ptr. The return value may be larger than the size that was requested during allocation. The malloc_usable_size() function is not a mechanism for in-place realloc(); rather it is provided solely as a tool for introspection purposes. Any discrepancy between the requested allocation size and the size reported by malloc_usable_size() should not be depended on, since such behavior is entirely implementation-dependent.

Once, when the first call is made to one of the memory allocation routines, the allocator initializes its internals based in part on various options that can be specified at compile- or run-time.

The string specified via --with-malloc-conf, the string pointed to by the global variable malloc_conf, the “name” of the file referenced by the symbolic link named /etc/malloc.conf, and the value of the environment variable MALLOC_CONF, will be interpreted, in that order, from left to right as options. Note that malloc_conf may be read before main() is entered, so the declaration of malloc_conf should specify an initializer that contains the final value to be read by jemalloc. --with-malloc-conf and malloc_conf are compile-time mechanisms, whereas /etc/malloc.conf and MALLOC_CONF can be safely set any time prior to program invocation.

An options string is a comma-separated list of option:value pairs. There is one key corresponding to each opt.* mallctl (see the MALLCTL NAMESPACE section for options documentation). For example, abort:true,narenas:1 sets the opt.abort and opt.narenas options. Some options have boolean values (true/false), others have integer values (base 8, 10, or 16, depending on prefix), and yet others have raw string values.

Traditionally, allocators have used sbrk(2) to obtain memory, which is suboptimal for several reasons, including race conditions, increased fragmentation, and artificial limitations on maximum usable memory. If sbrk(2) is supported by the operating system, this allocator uses both mmap(2) and sbrk(2), in that order of preference; otherwise only mmap(2) is used.

This allocator uses multiple arenas in order to reduce lock contention for threaded programs on multi-processor systems. This works well with regard to threading scalability, but incurs some costs. There is a small fixed per-arena overhead, and additionally, arenas manage memory completely independently of each other, which means a small fixed increase in overall memory fragmentation. These overheads are not generally an issue, given the number of arenas normally used. Note that using substantially more arenas than the default is not likely to improve performance, mainly due to reduced cache performance. However, it may make sense to reduce the number of arenas if an application does not make much use of the allocation functions.

In addition to multiple arenas, this allocator supports thread-specific caching, in order to make it possible to completely avoid synchronization for most allocation requests. Such caching allows very fast allocation in the common case, but it increases memory usage and fragmentation, since a bounded number of objects can remain allocated in each thread cache.

Memory is conceptually broken into extents. Extents are always aligned to multiples of the page size. This alignment makes it possible to find metadata for user objects quickly. User objects are broken into two categories according to size: small and large. Contiguous small objects comprise a slab, which resides within a single extent, whereas large objects each have their own extents backing them.

Small objects are managed in groups by slabs. Each slab maintains a bitmap to track which regions are in use. Allocation requests that are no more than half the quantum (8 or 16, depending on architecture) are rounded up to the nearest power of two that is at least sizeof(double). All other object size classes are multiples of the quantum, spaced such that there are four size classes for each doubling in size, which limits internal fragmentation to approximately 20% for all but the smallest size classes. Small size classes are smaller than four times the page size, and large size classes extend from four times the page size up to the largest size class that does not exceed PTRDIFF_MAX.

Allocations are packed tightly together, which can be an issue for multi-threaded applications. If you need to assure that allocations do not suffer from cacheline sharing, round your allocation requests up to the nearest multiple of the cacheline size, or specify cacheline alignment when allocating.

The realloc(), rallocx(), and xallocx() functions may resize allocations without moving them under limited circumstances. Unlike the *allocx() API, the standard API does not officially round up the usable size of an allocation to the nearest size class, so technically it is necessary to call realloc() to grow e.g. a 9-byte allocation to 16 bytes, or shrink a 16-byte allocation to 9 bytes. Growth and shrinkage trivially succeeds in place as long as the pre-size and post-size both round up to the same size class. No other API guarantees are made regarding in-place resizing, but the current implementation also tries to resize large allocations in place, as long as the pre-size and post-size are both large. For shrinkage to succeed, the extent allocator must support splitting (see arena.<i>.extent_hooks). Growth only succeeds if the trailing memory is currently available, and the extent allocator supports merging.

Assuming 4 KiB pages and a 16-byte quantum on a 64-bit system, the size classes in each category are as shown in Table 1.

Table 1. Size classes

Category Spacing Size
Small lg [8]
16 [16, 32, 48, 64, 80, 96, 112, 128]
32 [160, 192, 224, 256]
64 [320, 384, 448, 512]
128 [640, 768, 896, 1024]
256 [1280, 1536, 1792, 2048]
512 [2560, 3072, 3584, 4096]
1 KiB [5 KiB, 6 KiB, 7 KiB, 8 KiB]
2 KiB [10 KiB, 12 KiB, 14 KiB]
Large 2 KiB [16 KiB]
4 KiB [20 KiB, 24 KiB, 28 KiB, 32 KiB]
8 KiB [40 KiB, 48 KiB, 54 KiB, 64 KiB]
16 KiB [80 KiB, 96 KiB, 112 KiB, 128 KiB]
32 KiB [160 KiB, 192 KiB, 224 KiB, 256 KiB]
64 KiB [320 KiB, 384 KiB, 448 KiB, 512 KiB]
128 KiB [640 KiB, 768 KiB, 896 KiB, 1 MiB]
256 KiB [1280 KiB, 1536 KiB, 1792 KiB, 2 MiB]
512 KiB [2560 KiB, 3 MiB, 3584 KiB, 4 MiB]
1 MiB [5 MiB, 6 MiB, 7 MiB, 8 MiB]
2 MiB [10 MiB, 12 MiB, 14 MiB, 16 MiB]
4 MiB [20 MiB, 24 MiB, 28 MiB, 32 MiB]
8 MiB [40 MiB, 48 MiB, 56 MiB, 64 MiB]
... ...
512 PiB [2560 PiB, 3 EiB, 3584 PiB, 4 EiB]
1 EiB [5 EiB, 6 EiB, 7 EiB]

The following names are defined in the namespace accessible via the
mallctl*() functions. Value types are specified in parentheses, their readable/writable statuses are encoded as rw, r-, -w, or --, and required build configuration flags follow, if any. A name element encoded as <i> or <j> indicates an integer component, where the integer varies from 0 to some upper value that must be determined via introspection. In the case of stats.arenas.<i>.* and arena.<i>.{initialized,purge,decay,dss}, <i> equal to MALLCTL_ARENAS_ALL can be used to operate on all arenas or access the summation of statistics from all arenas; similarly <i> equal to MALLCTL_ARENAS_DESTROYED can be used to access the summation of statistics from all destroyed arenas. These constants can be utilized either via mallctlnametomib() followed by mallctlbymib(), or via code such as the following:

#define STRINGIFY_HELPER(x) #x
#define STRINGIFY(x) STRINGIFY_HELPER(x)
mallctl("arena." STRINGIFY(MALLCTL_ARENAS_ALL) ".decay",


    NULL, NULL, NULL, 0);

Take special note of the epoch mallctl, which controls refreshing of cached dynamic statistics.

version (const char *) r-

Return the jemalloc version string.

epoch (uint64_t) rw

If a value is passed in, refresh the data from which the mallctl*() functions report values, and increment the epoch. Return the current epoch. This is useful for detecting whether another thread caused a refresh.

background_thread (bool) rw

Enable/disable internal background worker threads. When set to true, background threads are created on demand (the number of background threads will be no more than the number of CPUs or active arenas). Threads run periodically, and handle purging asynchronously. When switching off, background threads are terminated synchronously. Note that after fork(2) function, the state in the child process will be disabled regardless the state in parent process. See stats.background_thread for related stats. opt.background_thread can be used to set the default option. This option is only available on selected pthread-based platforms.

max_background_threads (size_t) rw

Maximum number of background worker threads that will be created. This value is capped at opt.max_background_threads at startup.

config.cache_oblivious (bool) r-

--enable-cache-oblivious was specified during build configuration.

config.debug (bool) r-

--enable-debug was specified during build configuration.

config.fill (bool) r-

--enable-fill was specified during build configuration.

config.lazy_lock (bool) r-

--enable-lazy-lock was specified during build configuration.

config.malloc_conf (const char *) r-

Embedded configure-time-specified run-time options string, empty unless --with-malloc-conf was specified during build configuration.

config.prof (bool) r-

--enable-prof was specified during build configuration.

config.prof_libgcc (bool) r-

--disable-prof-libgcc was not specified during build configuration.

config.prof_libunwind (bool) r-

--enable-prof-libunwind was specified during build configuration.

config.stats (bool) r-

--enable-stats was specified during build configuration.

config.utrace (bool) r-

--enable-utrace was specified during build configuration.

config.xmalloc (bool) r-

--enable-xmalloc was specified during build configuration.

opt.abort (bool) r-

Abort-on-warning enabled/disabled. If true, most warnings are fatal. Note that runtime option warnings are not included (see opt.abort_conf for that). The process will call abort(3) in these cases. This option is disabled by default unless --enable-debug is specified during configuration, in which case it is enabled by default.

opt.abort_conf (bool) r-

Abort-on-invalid-configuration enabled/disabled. If true, invalid runtime options are fatal. The process will call abort(3) in these cases. This option is disabled by default unless --enable-debug is specified during configuration, in which case it is enabled by default.

opt.metadata_thp (const char *) r-

Controls whether to allow jemalloc to use transparent huge page (THP) for internal metadata (see stats.metadata). “always” allows such usage. “auto” uses no THP initially, but may begin to do so when metadata usage reaches certain level. The default is “disabled”.

opt.retain (bool) r-

If true, retain unused virtual memory for later reuse rather than discarding it by calling munmap(2) or equivalent (see stats.retained for related details). This option is disabled by default unless discarding virtual memory is known to trigger platform-specific performance problems, e.g. for [64-bit] Linux, which has a quirk in its virtual memory allocation algorithm that causes semi-permanent VM map holes under normal jemalloc operation. Although munmap(2) causes issues on 32-bit Linux as well, retaining virtual memory for 32-bit Linux is disabled by default due to the practical possibility of address space exhaustion.

opt.dss (const char *) r-

dss (sbrk(2)) allocation precedence as related to mmap(2) allocation. The following settings are supported if sbrk(2) is supported by the operating system: “disabled”, “primary”, and “secondary”; otherwise only “disabled” is supported. The default is “secondary” if sbrk(2) is supported by the operating system; “disabled” otherwise.

opt.narenas (unsigned) r-

Maximum number of arenas to use for automatic multiplexing of threads and arenas. The default is four times the number of CPUs, or one if there is a single CPU.

opt.percpu_arena (const char *) r-

Per CPU arena mode. Use the “percpu” setting to enable this feature, which uses number of CPUs to determine number of arenas, and bind threads to arenas dynamically based on the CPU the thread runs on currently. “phycpu” setting uses one arena per physical CPU, which means the two hyper threads on the same CPU share one arena. Note that no runtime checking regarding the availability of hyper threading is done at the moment. When set to “disabled”, narenas and thread to arena association will not be impacted by this option. The default is “disabled”.

opt.background_thread (const bool) r-

Internal background worker threads enabled/disabled. Because of potential circular dependencies, enabling background thread using this option may cause crash or deadlock during initialization. For a reliable way to use this feature, see background_thread for dynamic control options and details. This option is disabled by default.

opt.max_background_threads (const size_t) r-

Maximum number of background threads that will be created if background_thread is set. Defaults to number of cpus.

opt.dirty_decay_ms (ssize_t) r-

Approximate time in milliseconds from the creation of a set of unused dirty pages until an equivalent set of unused dirty pages is purged (i.e. converted to muzzy via e.g. madvise(...MADV_FREE) if supported by the operating system, or converted to clean otherwise) and/or reused. Dirty pages are defined as previously having been potentially written to by the application, and therefore consuming physical memory, yet having no current use. The pages are incrementally purged according to a sigmoidal decay curve that starts and ends with zero purge rate. A decay time of 0 causes all unused dirty pages to be purged immediately upon creation. A decay time of -1 disables purging. The default decay time is 10 seconds. See arenas.dirty_decay_ms and arena.<i>.dirty_decay_ms for related dynamic control options. See opt.muzzy_decay_ms for a description of muzzy pages.

opt.muzzy_decay_ms (ssize_t) r-

Approximate time in milliseconds from the creation of a set of unused muzzy pages until an equivalent set of unused muzzy pages is purged (i.e. converted to clean) and/or reused. Muzzy pages are defined as previously having been unused dirty pages that were subsequently purged in a manner that left them subject to the reclamation whims of the operating system (e.g. madvise(...MADV_FREE)), and therefore in an indeterminate state. The pages are incrementally purged according to a sigmoidal decay curve that starts and ends with zero purge rate. A decay time of 0 causes all unused muzzy pages to be purged immediately upon creation. A decay time of -1 disables purging. The default decay time is 10 seconds. See arenas.muzzy_decay_ms and arena.<i>.muzzy_decay_ms for related dynamic control options.

opt.lg_extent_max_active_fit (size_t) r-

When reusing dirty extents, this determines the (log base 2 of the) maximum ratio between the size of the active extent selected (to split off from) and the size of the requested allocation. This prevents the splitting of large active extents for smaller allocations, which can reduce fragmentation over the long run (especially for non-active extents). Lower value may reduce fragmentation, at the cost of extra active extents. The default value is 6, which gives a maximum ratio of 64 (2^6).

opt.stats_print (bool) r-

Enable/disable statistics printing at exit. If enabled, the malloc_stats_print() function is called at program exit via an atexit(3) function. opt.stats_print_opts can be combined to specify output options. If --enable-stats is specified during configuration, this has the potential to cause deadlock for a multi-threaded process that exits while one or more threads are executing in the memory allocation functions. Furthermore, atexit() may allocate memory during application initialization and then deadlock internally when jemalloc in turn calls atexit(), so this option is not universally usable (though the application can register its own atexit() function with equivalent functionality). Therefore, this option should only be used with care; it is primarily intended as a performance tuning aid during application development. This option is disabled by default.

opt.stats_print_opts (const char *) r-

Options (the opts string) to pass to the malloc_stats_print() at exit (enabled through opt.stats_print). See available options in malloc_stats_print(). Has no effect unless opt.stats_print is enabled. The default is “”.

opt.junk (const char *) r- [--enable-fill]

Junk filling. If set to “alloc”, each byte of uninitialized allocated memory will be initialized to 0xa5. If set to “free”, all deallocated memory will be initialized to 0x5a. If set to “true”, both allocated and deallocated memory will be initialized, and if set to “false”, junk filling be disabled entirely. This is intended for debugging and will impact performance negatively. This option is “false” by default unless --enable-debug is specified during configuration, in which case it is “true” by default.

opt.zero (bool) r- [--enable-fill]

Zero filling enabled/disabled. If enabled, each byte of uninitialized allocated memory will be initialized to 0. Note that this initialization only happens once for each byte, so realloc() and rallocx() calls do not zero memory that was previously allocated. This is intended for debugging and will impact performance negatively. This option is disabled by default.

opt.utrace (bool) r- [--enable-utrace]

Allocation tracing based on utrace(2) enabled/disabled. This option is disabled by default.

opt.xmalloc (bool) r- [--enable-xmalloc]

Abort-on-out-of-memory enabled/disabled. If enabled, rather than returning failure for any allocation function, display a diagnostic message on STDERR_FILENO and cause the program to drop core (using abort(3)). If an application is designed to depend on this behavior, set the option at compile time by including the following in the source code: 

malloc_conf = "xmalloc:true";

This option is disabled by default.

opt.tcache (bool) r-

Thread-specific caching (tcache) enabled/disabled. When there are multiple threads, each thread uses a tcache for objects up to a certain size. Thread-specific caching allows many allocations to be satisfied without performing any thread synchronization, at the cost of increased memory use. See the opt.lg_tcache_max option for related tuning information. This option is enabled by default.

opt.lg_tcache_max (size_t) r-

Maximum size class (log base 2) to cache in the thread-specific cache (tcache). At a minimum, all small size classes are cached, and at a maximum all large size classes are cached. The default maximum is 32 KiB (2^15).

opt.thp (const char *) r-

Transparent hugepage (THP) mode. Settings "always", "never" and "default" are available if THP is supported by the operating system. The "always" setting enables transparent hugepage for all user memory mappings with MADV_HUGEPAGE; "never" ensures no transparent hugepage with MADV_NOHUGEPAGE; the default setting "default" makes no changes. Note that: this option does not affect THP for jemalloc internal metadata (see opt.metadata_thp); in addition, for arenas with customized extent_hooks, this option is bypassed as it is implemented as part of the default extent hooks.

opt.prof (bool) r- [--enable-prof]

Memory profiling enabled/disabled. If enabled, profile memory allocation activity. See the opt.prof_active option for on-the-fly activation/deactivation. See the opt.lg_prof_sample option for probabilistic sampling control. See the opt.prof_accum option for control of cumulative sample reporting. See the opt.lg_prof_interval option for information on interval-triggered profile dumping, the opt.prof_gdump option for information on high-water-triggered profile dumping, and the opt.prof_final option for final profile dumping. Profile output is compatible with the jeprof command, which is based on the pprof that is developed as part of the gperftools package[3]. See HEAP PROFILE FORMAT for heap profile format documentation.

opt.prof_prefix (const char *) r- [--enable-prof]

Filename prefix for profile dumps. If the prefix is set to the empty string, no automatic dumps will occur; this is primarily useful for disabling the automatic final heap dump (which also disables leak reporting, if enabled). The default prefix is jeprof.

opt.prof_active (bool) r- [--enable-prof]

Profiling activated/deactivated. This is a secondary control mechanism that makes it possible to start the application with profiling enabled (see the opt.prof option) but inactive, then toggle profiling at any time during program execution with the prof.active mallctl. This option is enabled by default.

opt.prof_thread_active_init (bool) r- [--enable-prof]

Initial setting for thread.prof.active in newly created threads. The initial setting for newly created threads can also be changed during execution via the prof.thread_active_init mallctl. This option is enabled by default.

opt.lg_prof_sample (size_t) r- [--enable-prof]

Average interval (log base 2) between allocation samples, as measured in bytes of allocation activity. Increasing the sampling interval decreases profile fidelity, but also decreases the computational overhead. The default sample interval is 512 KiB (2^19 B).

opt.prof_accum (bool) r- [--enable-prof]

Reporting of cumulative object/byte counts in profile dumps enabled/disabled. If this option is enabled, every unique backtrace must be stored for the duration of execution. Depending on the application, this can impose a large memory overhead, and the cumulative counts are not always of interest. This option is disabled by default.

opt.lg_prof_interval (ssize_t) r- [--enable-prof]

Average interval (log base 2) between memory profile dumps, as measured in bytes of allocation activity. The actual interval between dumps may be sporadic because decentralized allocation counters are used to avoid synchronization bottlenecks. Profiles are dumped to files named according to the pattern <prefix>.<pid>.<seq>.i<iseq>.heap, where <prefix> is controlled by the opt.prof_prefix option. By default, interval-triggered profile dumping is disabled (encoded as -1).

opt.prof_gdump (bool) r- [--enable-prof]

Set the initial state of prof.gdump, which when enabled triggers a memory profile dump every time the total virtual memory exceeds the previous maximum. This option is disabled by default.

opt.prof_final (bool) r- [--enable-prof]

Use an atexit(3) function to dump final memory usage to a file named according to the pattern <prefix>.<pid>.<seq>.f.heap, where <prefix> is controlled by the opt.prof_prefix option. Note that atexit() may allocate memory during application initialization and then deadlock internally when jemalloc in turn calls atexit(), so this option is not universally usable (though the application can register its own atexit() function with equivalent functionality). This option is disabled by default.

opt.prof_leak (bool) r- [--enable-prof]

Leak reporting enabled/disabled. If enabled, use an atexit(3) function to report memory leaks detected by allocation sampling. See the opt.prof option for information on analyzing heap profile output. This option is disabled by default.

thread.arena (unsigned) rw

Get or set the arena associated with the calling thread. If the specified arena was not initialized beforehand (see the arena.i.initialized mallctl), it will be automatically initialized as a side effect of calling this interface.

thread.allocated (uint64_t) r- [--enable-stats]

Get the total number of bytes ever allocated by the calling thread. This counter has the potential to wrap around; it is up to the application to appropriately interpret the counter in such cases.

thread.allocatedp (uint64_t *) r- [--enable-stats]

Get a pointer to the the value that is returned by the thread.allocated mallctl. This is useful for avoiding the overhead of repeated mallctl*() calls.

thread.deallocated (uint64_t) r- [--enable-stats]

Get the total number of bytes ever deallocated by the calling thread. This counter has the potential to wrap around; it is up to the application to appropriately interpret the counter in such cases.

thread.deallocatedp (uint64_t *) r- [--enable-stats]

Get a pointer to the the value that is returned by the thread.deallocated mallctl. This is useful for avoiding the overhead of repeated mallctl*() calls.

thread.tcache.enabled (bool) rw

Enable/disable calling thread's tcache. The tcache is implicitly flushed as a side effect of becoming disabled (see thread.tcache.flush).

thread.tcache.flush (void) --

Flush calling thread's thread-specific cache (tcache). This interface releases all cached objects and internal data structures associated with the calling thread's tcache. Ordinarily, this interface need not be called, since automatic periodic incremental garbage collection occurs, and the thread cache is automatically discarded when a thread exits. However, garbage collection is triggered by allocation activity, so it is possible for a thread that stops allocating/deallocating to retain its cache indefinitely, in which case the developer may find manual flushing useful.

thread.prof.name (const char *) r- or -w [--enable-prof]

Get/set the descriptive name associated with the calling thread in memory profile dumps. An internal copy of the name string is created, so the input string need not be maintained after this interface completes execution. The output string of this interface should be copied for non-ephemeral uses, because multiple implementation details can cause asynchronous string deallocation. Furthermore, each invocation of this interface can only read or write; simultaneous read/write is not supported due to string lifetime limitations. The name string must be nil-terminated and comprised only of characters in the sets recognized by isgraph(3) and isblank(3).

thread.prof.active (bool) rw [--enable-prof]

Control whether sampling is currently active for the calling thread. This is an activation mechanism in addition to prof.active; both must be active for the calling thread to sample. This flag is enabled by default.

tcache.create (unsigned) r-

Create an explicit thread-specific cache (tcache) and return an identifier that can be passed to the MALLOCX_TCACHE(tc) macro to explicitly use the specified cache rather than the automatically managed one that is used by default. Each explicit cache can be used by only one thread at a time; the application must assure that this constraint holds.

tcache.flush (unsigned) -w

Flush the specified thread-specific cache (tcache). The same considerations apply to this interface as to thread.tcache.flush, except that the tcache will never be automatically discarded.

tcache.destroy (unsigned) -w

Flush the specified thread-specific cache (tcache) and make the identifier available for use during a future tcache creation.

arena.<i>.initialized (bool) r-

Get whether the specified arena's statistics are initialized (i.e. the arena was initialized prior to the current epoch). This interface can also be nominally used to query whether the merged statistics corresponding to MALLCTL_ARENAS_ALL are initialized (always true).

arena.<i>.decay (void) --

Trigger decay-based purging of unused dirty/muzzy pages for arena <i>, or for all arenas if <i> equals MALLCTL_ARENAS_ALL. The proportion of unused dirty/muzzy pages to be purged depends on the current time; see opt.dirty_decay_ms and opt.muzy_decay_ms for details.

arena.<i>.purge (void) --

Purge all unused dirty pages for arena <i>, or for all arenas if <i> equals MALLCTL_ARENAS_ALL.

arena.<i>.reset (void) --

Discard all of the arena's extant allocations. This interface can only be used with arenas explicitly created via arenas.create. None of the arena's discarded/cached allocations may accessed afterward. As part of this requirement, all thread caches which were used to allocate/deallocate in conjunction with the arena must be flushed beforehand.

arena.<i>.destroy (void) --

Destroy the arena. Discard all of the arena's extant allocations using the same mechanism as for arena.<i>.reset (with all the same constraints and side effects), merge the arena stats into those accessible at arena index MALLCTL_ARENAS_DESTROYED, and then completely discard all metadata associated with the arena. Future calls to arenas.create may recycle the arena index. Destruction will fail if any threads are currently associated with the arena as a result of calls to thread.arena.

arena.<i>.dss (const char *) rw

Set the precedence of dss allocation as related to mmap allocation for arena <i>, or for all arenas if <i> equals MALLCTL_ARENAS_ALL. See opt.dss for supported settings.

arena.<i>.dirty_decay_ms (ssize_t) rw

Current per-arena approximate time in milliseconds from the creation of a set of unused dirty pages until an equivalent set of unused dirty pages is purged and/or reused. Each time this interface is set, all currently unused dirty pages are considered to have fully decayed, which causes immediate purging of all unused dirty pages unless the decay time is set to -1 (i.e. purging disabled). See opt.dirty_decay_ms for additional information.

arena.<i>.muzzy_decay_ms (ssize_t) rw

Current per-arena approximate time in milliseconds from the creation of a set of unused muzzy pages until an equivalent set of unused muzzy pages is purged and/or reused. Each time this interface is set, all currently unused muzzy pages are considered to have fully decayed, which causes immediate purging of all unused muzzy pages unless the decay time is set to -1 (i.e. purging disabled). See opt.muzzy_decay_ms for additional information.

arena.<i>.retain_grow_limit (size_t) rw

Maximum size to grow retained region (only relevant when opt.retain is enabled). This controls the maximum increment to expand virtual memory, or allocation through arena.<i>extent_hooks. In particular, if customized extent hooks reserve physical memory (e.g. 1G huge pages), this is useful to control the allocation hook's input size. The default is no limit.

arena.<i>.extent_hooks (extent_hooks_t *) rw

Get or set the extent management hook functions for arena <i>. The functions must be capable of operating on all extant extents associated with arena <i>, usually by passing unknown extents to the replaced functions. In practice, it is feasible to control allocation for arenas explicitly created via arenas.create such that all extents originate from an application-supplied extent allocator (by specifying the custom extent hook functions during arena creation), but the automatically created arenas will have already created extents prior to the application having an opportunity to take over extent allocation. 

typedef extent_hooks_s extent_hooks_t;
struct extent_hooks_s {
	extent_alloc_t		*alloc;
	extent_dalloc_t		*dalloc;
	extent_destroy_t	*destroy;
	extent_commit_t		*commit;
	extent_decommit_t	*decommit;
	extent_purge_t		*purge_lazy;
	extent_purge_t		*purge_forced;
	extent_split_t		*split;
	extent_merge_t		*merge;
};

The extent_hooks_t structure comprises function pointers which are described individually below. jemalloc uses these functions to manage extent lifetime, which starts off with allocation of mapped committed memory, in the simplest case followed by deallocation. However, there are performance and platform reasons to retain extents for later reuse. Cleanup attempts cascade from deallocation to decommit to forced purging to lazy purging, which gives the extent management functions opportunities to reject the most permanent cleanup operations in favor of less permanent (and often less costly) operations. All operations except allocation can be universally opted out of by setting the hook pointers to NULL, or selectively opted out of by returning failure. Note that once the extent hook is set, the structure is accessed directly by the associated arenas, so it must remain valid for the entire lifetime of the arenas.

typedef void *(extent_alloc_t)(extent_hooks_t *extent_hooks, void *new_addr, size_t size, size_t alignment, bool *zero, bool *commit, unsigned arena_ind);





An extent allocation function conforms to the
    extent_alloc_t type and upon success returns a pointer to size
    bytes of mapped memory on behalf of arena arena_ind such that the
    extent's base address is a multiple of alignment, as well as setting
    *zero to indicate whether the extent is zeroed and *commit to
    indicate whether the extent is committed. Upon error the function returns
    NULL and leaves *zero and *commit unmodified. The
    size parameter is always a multiple of the page size. The
    alignment parameter is always a power of two at least as large as the
    page size. Zeroing is mandatory if *zero is true upon function entry.
    Committing is mandatory if *commit is true upon function entry. If
    new_addr is not NULL, the returned pointer must be
    new_addr on success or NULL on error. Committed memory may be
    committed in absolute terms as on a system that does not overcommit, or in
    implicit terms as on a system that overcommits and satisfies physical memory
    needs on demand via soft page faults. Note that replacing the default extent
    allocation function makes the arena's arena.<i>.dss setting
    irrelevant.


typedef bool
    (extent_dalloc_t)(extent_hooks_t *extent_hooks,
    void *addr, size_t size,
    bool committed,
    unsigned arena_ind);










An extent deallocation function conforms to the
    extent_dalloc_t type and deallocates an extent at given addr
    and size with committed/decommited memory as indicated, on
    behalf of arena arena_ind, returning false upon success. If the
    function returns true, this indicates opt-out from deallocation; the virtual
    memory mapping associated with the extent remains mapped, in the same commit
    state, and available for future use, in which case it will be automatically
    retained for later reuse.


typedef void
    (extent_destroy_t)(extent_hooks_t *extent_hooks,
    void *addr, size_t size,
    bool committed,
    unsigned arena_ind);










An extent destruction function conforms to the
    extent_destroy_t type and unconditionally destroys an extent at given
    addr and size with committed/decommited memory as
    indicated, on behalf of arena arena_ind. This function may be called
    to destroy retained extents during arena destruction (see
    arena.<i>.destroy).


typedef bool
    (extent_commit_t)(extent_hooks_t *extent_hooks,
    void *addr, size_t size,
    size_t offset, size_t length,
    unsigned arena_ind);










An extent commit function conforms to the extent_commit_t
    type and commits zeroed physical memory to back pages within an extent at
    given addr and size at offset bytes, extending for
    length on behalf of arena arena_ind, returning false upon
    success. Committed memory may be committed in absolute terms as on a system
    that does not overcommit, or in implicit terms as on a system that
    overcommits and satisfies physical memory needs on demand via soft page
    faults. If the function returns true, this indicates insufficient physical
    memory to satisfy the request.


typedef bool
    (extent_decommit_t)(extent_hooks_t *extent_hooks,
    void *addr, size_t size,
    size_t offset, size_t length,
    unsigned arena_ind);










An extent decommit function conforms to the
    extent_decommit_t type and decommits any physical memory that is
    backing pages within an extent at given addr and size at
    offset bytes, extending for length on behalf of arena
    arena_ind, returning false upon success, in which case the pages will
    be committed via the extent commit function before being reused. If the
    function returns true, this indicates opt-out from decommit; the memory
    remains committed and available for future use, in which case it will be
    automatically retained for later reuse.


typedef bool
    (extent_purge_t)(extent_hooks_t *extent_hooks,
    void *addr, size_t size,
    size_t offset, size_t length,
    unsigned arena_ind);










An extent purge function conforms to the extent_purge_t
    type and discards physical pages within the virtual memory mapping
    associated with an extent at given addr and size at
    offset bytes, extending for length on behalf of arena
    arena_ind. A lazy extent purge function (e.g. implemented via
    madvise(...MADV_FREE)) can delay purging indefinitely
    and leave the pages within the purged virtual memory range in an
    indeterminite state, whereas a forced extent purge function immediately
    purges, and the pages within the virtual memory range will be zero-filled
    the next time they are accessed. If the function returns true, this
    indicates failure to purge.


typedef bool
    (extent_split_t)(extent_hooks_t *extent_hooks,
    void *addr, size_t size,
    size_t size_a, size_t size_b,
    bool committed,
    unsigned arena_ind);










An extent split function conforms to the extent_split_t
    type and optionally splits an extent at given addr and size
    into two adjacent extents, the first of size_a bytes, and the second
    of size_b bytes, operating on committed/decommitted memory as
    indicated, on behalf of arena arena_ind, returning false upon
    success. If the function returns true, this indicates that the extent
    remains unsplit and therefore should continue to be operated on as a
  whole.


typedef bool
    (extent_merge_t)(extent_hooks_t *extent_hooks,
    void *addr_a, size_t size_a,
    void *addr_b, size_t size_b,
    bool committed,
    unsigned arena_ind);










An extent merge function conforms to the extent_merge_t
    type and optionally merges adjacent extents, at given addr_a and
    size_a with given addr_b and size_b into one contiguous
    extent, operating on committed/decommitted memory as indicated, on
    behalf of arena arena_ind, returning false upon success. If the
    function returns true, this indicates that the extents remain distinct
    mappings and therefore should continue to be operated on independently.




arenas.narenas (unsigned) r-


Current limit on number of arenas.


arenas.dirty_decay_ms (ssize_t) rw


Current default per-arena approximate time in
  milliseconds from the creation of a set of unused dirty pages until an
  equivalent set of unused dirty pages is purged and/or reused, used to
  initialize arena.<i>.dirty_decay_ms during arena creation. See
  opt.dirty_decay_ms for additional information.


arenas.muzzy_decay_ms (ssize_t) rw


Current default per-arena approximate time in
  milliseconds from the creation of a set of unused muzzy pages until an
  equivalent set of unused muzzy pages is purged and/or reused, used to
  initialize arena.<i>.muzzy_decay_ms during arena creation. See
  opt.muzzy_decay_ms for additional information.


arenas.quantum (size_t) r-


Quantum size.


arenas.page (size_t) r-


Page size.


arenas.tcache_max (size_t) r-


Maximum thread-cached size class.


arenas.nbins (unsigned) r-


Number of bin size classes.


arenas.nhbins (unsigned) r-


Total number of thread cache bin size classes.


arenas.bin.<i>.size (size_t) r-


Maximum size supported by size class.


arenas.bin.<i>.nregs (uint32_t) r-


Number of regions per slab.


arenas.bin.<i>.slab_size (size_t) r-


Number of bytes per slab.


arenas.nlextents (unsigned) r-


Total number of large size classes.


arenas.lextent.<i>.size (size_t) r-


Maximum size supported by this large size class.


arenas.create (unsigned, extent_hooks_t *) rw


Explicitly create a new arena outside the range of
  automatically managed arenas, with optionally specified extent hooks, and
  return the new arena index.


arenas.lookup (unsigned, void*) rw


Index of the arena to which an allocation belongs
  to.


prof.thread_active_init (bool) rw
  [--enable-prof]


Control the initial setting for thread.prof.active in
  newly created threads. See the opt.prof_thread_active_init option for
  additional information.


prof.active (bool) rw [--enable-prof]


Control whether sampling is currently active. See the
  opt.prof_active option for additional information, as well as the interrelated
  thread.prof.active mallctl.


prof.dump (const char *) -w [--enable-prof]


Dump a memory profile to the specified file, or if NULL
  is specified, to a file according to the pattern
  <prefix>.<pid>.<seq>.m<mseq>.heap, where
  <prefix> is controlled by the opt.prof_prefix option.


prof.gdump (bool) rw [--enable-prof]


When enabled, trigger a memory profile dump every time
  the total virtual memory exceeds the previous maximum. Profiles are dumped to
  files named according to the pattern
  <prefix>.<pid>.<seq>.u<useq>.heap, where
  <prefix> is controlled by the opt.prof_prefix option.


prof.reset (size_t) -w [--enable-prof]


Reset all memory profile statistics, and optionally
  update the sample rate (see opt.lg_prof_sample and prof.lg_sample).


prof.lg_sample (size_t) r- [--enable-prof]


Get the current sample rate (see
  opt.lg_prof_sample).


prof.interval (uint64_t) r- [--enable-prof]


Average number of bytes allocated between interval-based
  profile dumps. See the opt.lg_prof_interval option for additional
  information.


stats.allocated (size_t) r- [--enable-stats]


Total number of bytes allocated by the application.


stats.active (size_t) r- [--enable-stats]


Total number of bytes in active pages allocated by the
  application. This is a multiple of the page size, and greater than or equal to
  stats.allocated. This does not include stats.arenas.<i>.pdirty,
  stats.arenas.<i>.pmuzzy, nor pages entirely devoted to allocator
  metadata.


stats.metadata (size_t) r- [--enable-stats]


Total number of bytes dedicated to metadata, which
  comprise base allocations used for bootstrap-sensitive allocator metadata
  structures (see stats.arenas.<i>.base) and internal allocations (see
  stats.arenas.<i>.internal). Transparent huge page (enabled with
  opt.metadata_thp) usage is not considered.


stats.metadata_thp (size_t) r- [--enable-stats]


Number of transparent huge pages (THP) used for metadata.
  See stats.metadata and opt.metadata_thp) for details.


stats.resident (size_t) r- [--enable-stats]


Maximum number of bytes in physically resident data pages
  mapped by the allocator, comprising all pages dedicated to allocator metadata,
  pages backing active allocations, and unused dirty pages. This is a maximum
  rather than precise because pages may not actually be physically resident if
  they correspond to demand-zeroed virtual memory that has not yet been touched.
  This is a multiple of the page size, and is larger than stats.active.


stats.mapped (size_t) r- [--enable-stats]


Total number of bytes in active extents mapped by the
  allocator. This is larger than stats.active. This does not include inactive
  extents, even those that contain unused dirty pages, which means that there is
  no strict ordering between this and stats.resident.


stats.retained (size_t) r- [--enable-stats]


Total number of bytes in virtual memory mappings that
  were retained rather than being returned to the operating system via e.g.
  munmap(2) or similar. Retained virtual memory is typically untouched,
  decommitted, or purged, so it has no strongly associated physical memory (see
  extent hooks for details). Retained memory is excluded from mapped memory
  statistics, e.g. stats.mapped.


stats.background_thread.num_threads (size_t) r-
    [--enable-stats]


Number of background threads running currently.


stats.background_thread.num_runs (uint64_t) r-
    [--enable-stats]


Total number of runs from all background threads.


stats.background_thread.run_interval (uint64_t) r-
    [--enable-stats]


Average run interval in nanoseconds of background
  threads.


stats.mutexes.ctl.{counter}; (counter specific type) r-
    [--enable-stats]


Statistics on ctl mutex (global scope; mallctl
  related). {counter} is one of the counters below:



num_ops (uint64_t): Total number of lock
  acquisition operations on this mutex.

num_spin_acq (uint64_t): Number of times the mutex
    was spin-acquired. When the mutex is currently locked and cannot be acquired
    immediately, a short period of spin-retry within jemalloc will be performed.
    Acquired through spin generally means the contention was lightweight and not
    causing context switches.


num_wait (uint64_t): Number of times the mutex was
    wait-acquired, which means the mutex contention was not solved by
    spin-retry, and blocking operation was likely involved in order to acquire
    the mutex. This event generally implies higher cost / longer delay, and
    should be investigated if it happens often.


max_wait_time (uint64_t): Maximum length of time in
    nanoseconds spent on a single wait-acquired lock operation. Note that to
    avoid profiling overhead on the common path, this does not consider
    spin-acquired cases.


total_wait_time (uint64_t): Cumulative time in
    nanoseconds spent on wait-acquired lock operations. Similarly, spin-acquired
    cases are not considered.


max_num_thds (uint32_t): Maximum number of threads
    waiting on this mutex simultaneously. Similarly, spin-acquired cases are not
    considered.


num_owner_switch (uint64_t): Number of times the
    current mutex owner is different from the previous one. This event does not
    generally imply an issue; rather it is an indicator of how often the
    protected data are accessed by different threads.






stats.mutexes.background_thread.{counter} (counter specific
    type) r- [--enable-stats]


Statistics on background_thread mutex (global
  scope; background_thread related). {counter} is one of the counters in mutex
  profiling counters.


stats.mutexes.prof.{counter} (counter specific type) r-
    [--enable-stats]


Statistics on prof mutex (global scope; profiling
  related). {counter} is one of the counters in mutex profiling counters.


stats.mutexes.reset (void) -- [--enable-stats]


Reset all mutex profile statistics, including global
  mutexes, arena mutexes and bin mutexes.


stats.arenas.<i>.dss (const char *) r-


dss (sbrk(2)) allocation precedence as related to
  mmap(2) allocation. See opt.dss for details.


stats.arenas.<i>.dirty_decay_ms (ssize_t) r-


Approximate time in milliseconds from the creation of a
  set of unused dirty pages until an equivalent set of unused dirty pages is
  purged and/or reused. See opt.dirty_decay_ms for details.


stats.arenas.<i>.muzzy_decay_ms (ssize_t) r-


Approximate time in milliseconds from the creation of a
  set of unused muzzy pages until an equivalent set of unused muzzy pages is
  purged and/or reused. See opt.muzzy_decay_ms for details.


stats.arenas.<i>.nthreads (unsigned) r-


Number of threads currently assigned to arena.


stats.arenas.<i>.uptime (uint64_t) r-


Time elapsed (in nanoseconds) since the arena was
  created. If <i> equals 0 or MALLCTL_ARENAS_ALL, this is
  the uptime since malloc initialization.


stats.arenas.<i>.pactive (size_t) r-


Number of pages in active extents.


stats.arenas.<i>.pdirty (size_t) r-


Number of pages within unused extents that are
  potentially dirty, and for which madvise() or similar has not been called. See
  opt.dirty_decay_ms for a description of dirty pages.


stats.arenas.<i>.pmuzzy (size_t) r-


Number of pages within unused extents that are muzzy. See
  opt.muzzy_decay_ms for a description of muzzy pages.


stats.arenas.<i>.mapped (size_t) r-
    [--enable-stats]


Number of mapped bytes.


stats.arenas.<i>.retained (size_t) r-
    [--enable-stats]


Number of retained bytes. See stats.retained for
  details.


stats.arenas.<i>.base (size_t) r-
    [--enable-stats]


Number of bytes dedicated to bootstrap-sensitive
  allocator metadata structures.


stats.arenas.<i>.internal (size_t) r-
    [--enable-stats]


Number of bytes dedicated to internal allocations.
  Internal allocations differ from application-originated allocations in that
  they are for internal use, and that they are omitted from heap profiles.


stats.arenas.<i>.metadata_thp (size_t) r-
    [--enable-stats]


Number of transparent huge pages (THP) used for metadata.
  See opt.metadata_thp for details.


stats.arenas.<i>.resident (size_t) r-
    [--enable-stats]


Maximum number of bytes in physically resident data pages
  mapped by the arena, comprising all pages dedicated to allocator metadata,
  pages backing active allocations, and unused dirty pages. This is a maximum
  rather than precise because pages may not actually be physically resident if
  they correspond to demand-zeroed virtual memory that has not yet been touched.
  This is a multiple of the page size.


stats.arenas.<i>.dirty_npurge (uint64_t) r-
    [--enable-stats]


Number of dirty page purge sweeps performed.


stats.arenas.<i>.dirty_nmadvise (uint64_t) r-
    [--enable-stats]


Number of madvise() or similar calls made to purge dirty
  pages.


stats.arenas.<i>.dirty_purged (uint64_t) r-
    [--enable-stats]


Number of dirty pages purged.


stats.arenas.<i>.muzzy_npurge (uint64_t) r-
    [--enable-stats]


Number of muzzy page purge sweeps performed.


stats.arenas.<i>.muzzy_nmadvise (uint64_t) r-
    [--enable-stats]


Number of madvise() or similar calls made to purge muzzy
  pages.


stats.arenas.<i>.muzzy_purged (uint64_t) r-
    [--enable-stats]


Number of muzzy pages purged.


stats.arenas.<i>.small.allocated (size_t) r-
    [--enable-stats]


Number of bytes currently allocated by small
  objects.


stats.arenas.<i>.small.nmalloc (uint64_t) r-
    [--enable-stats]


Cumulative number of times a small allocation was
  requested from the arena's bins, whether to fill the relevant tcache if
  opt.tcache is enabled, or to directly satisfy an allocation request
  otherwise.


stats.arenas.<i>.small.ndalloc (uint64_t) r-
    [--enable-stats]


Cumulative number of times a small allocation was
  returned to the arena's bins, whether to flush the relevant tcache if
  opt.tcache is enabled, or to directly deallocate an allocation
  otherwise.


stats.arenas.<i>.small.nrequests (uint64_t) r-
    [--enable-stats]


Cumulative number of allocation requests satisfied by all
  bin size classes.


stats.arenas.<i>.large.allocated (size_t) r-
    [--enable-stats]


Number of bytes currently allocated by large
  objects.


stats.arenas.<i>.large.nmalloc (uint64_t) r-
    [--enable-stats]


Cumulative number of times a large extent was allocated
  from the arena, whether to fill the relevant tcache if opt.tcache is enabled
  and the size class is within the range being cached, or to directly satisfy an
  allocation request otherwise.


stats.arenas.<i>.large.ndalloc (uint64_t) r-
    [--enable-stats]


Cumulative number of times a large extent was returned to
  the arena, whether to flush the relevant tcache if opt.tcache is enabled and
  the size class is within the range being cached, or to directly deallocate an
  allocation otherwise.


stats.arenas.<i>.large.nrequests (uint64_t) r-
    [--enable-stats]


Cumulative number of allocation requests satisfied by all
  large size classes.


stats.arenas.<i>.bins.<j>.nmalloc (uint64_t) r-
    [--enable-stats]


Cumulative number of times a bin region of the
  corresponding size class was allocated from the arena, whether to fill the
  relevant tcache if opt.tcache is enabled, or to directly satisfy an allocation
  request otherwise.


stats.arenas.<i>.bins.<j>.ndalloc (uint64_t) r-
    [--enable-stats]


Cumulative number of times a bin region of the
  corresponding size class was returned to the arena, whether to flush the
  relevant tcache if opt.tcache is enabled, or to directly deallocate an
  allocation otherwise.


stats.arenas.<i>.bins.<j>.nrequests (uint64_t)
    r- [--enable-stats]


Cumulative number of allocation requests satisfied by bin
  regions of the corresponding size class.


stats.arenas.<i>.bins.<j>.curregs (size_t) r-
    [--enable-stats]


Current number of regions for this size class.


stats.arenas.<i>.bins.<j>.nfills (uint64_t)
  r-


Cumulative number of tcache fills.


stats.arenas.<i>.bins.<j>.nflushes (uint64_t)
    r-


Cumulative number of tcache flushes.


stats.arenas.<i>.bins.<j>.nslabs (uint64_t) r-
    [--enable-stats]


Cumulative number of slabs created.


stats.arenas.<i>.bins.<j>.nreslabs (uint64_t)
    r- [--enable-stats]


Cumulative number of times the current slab from which to
  allocate changed.


stats.arenas.<i>.bins.<j>.curslabs (size_t) r-
    [--enable-stats]


Current number of slabs.


stats.arenas.<i>.bins.<j>.mutex.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.bins.<j> mutex
  (arena bin scope; bin operation related). {counter} is one of the counters in
  mutex profiling counters.


stats.arenas.<i>.lextents.<j>.nmalloc
    (uint64_t) r- [--enable-stats]


Cumulative number of times a large extent of the
  corresponding size class was allocated from the arena, whether to fill the
  relevant tcache if opt.tcache is enabled and the size class is within the
  range being cached, or to directly satisfy an allocation request
  otherwise.


stats.arenas.<i>.lextents.<j>.ndalloc
    (uint64_t) r- [--enable-stats]


Cumulative number of times a large extent of the
  corresponding size class was returned to the arena, whether to flush the
  relevant tcache if opt.tcache is enabled and the size class is within the
  range being cached, or to directly deallocate an allocation otherwise.


stats.arenas.<i>.lextents.<j>.nrequests
    (uint64_t) r- [--enable-stats]


Cumulative number of allocation requests satisfied by
  large extents of the corresponding size class.


stats.arenas.<i>.lextents.<j>.curlextents
    (size_t) r- [--enable-stats]


Current number of large allocations for this size
  class.


stats.arenas.<i>.mutexes.large.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.large mutex (arena
  scope; large allocation related). {counter} is one of the counters in mutex
  profiling counters.


stats.arenas.<i>.mutexes.extent_avail.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.extent_avail  mutex
  (arena scope; extent avail related). {counter} is one of the counters in mutex
  profiling counters.


stats.arenas.<i>.mutexes.extents_dirty.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.extents_dirty  mutex
  (arena scope; dirty extents related). {counter} is one of the counters in
  mutex profiling counters.


stats.arenas.<i>.mutexes.extents_muzzy.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.extents_muzzy  mutex
  (arena scope; muzzy extents related). {counter} is one of the counters in
  mutex profiling counters.


stats.arenas.<i>.mutexes.extents_retained.{counter}
    (counter specific type) r- [--enable-stats]


Statistics on arena.<i>.extents_retained 
  mutex (arena scope; retained extents related). {counter} is one of the
  counters in mutex profiling counters.


stats.arenas.<i>.mutexes.decay_dirty.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.decay_dirty  mutex
  (arena scope; decay for dirty pages related). {counter} is one of the counters
  in mutex profiling counters.


stats.arenas.<i>.mutexes.decay_muzzy.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.decay_muzzy  mutex
  (arena scope; decay for muzzy pages related). {counter} is one of the counters
  in mutex profiling counters.


stats.arenas.<i>.mutexes.base.{counter} (counter specific
    type) r- [--enable-stats]


Statistics on arena.<i>.base mutex (arena
  scope; base allocator related). {counter} is one of the counters in mutex
  profiling counters.


stats.arenas.<i>.mutexes.tcache_list.{counter} (counter
    specific type) r- [--enable-stats]


Statistics on arena.<i>.tcache_list mutex
  (arena scope; tcache to arena association related). This mutex is expected to
  be accessed less often. {counter} is one of the counters in mutex profiling
  counters.








Although the heap profiling functionality was originally designed
    to be compatible with the pprof command that is developed as part of
    the gperftools package[3], the addition of per thread heap profiling
    functionality required a different heap profile format. The jeprof
    command is derived from pprof, with enhancements to support the heap
    profile format described here.


In the following hypothetical heap profile, [...] indicates
    elision for the sake of compactness.






heap_v2/524288


  t*: 28106: 56637512 [0: 0]


  [...]


  t3: 352: 16777344 [0: 0]


  [...]


  t99: 17754: 29341640 [0: 0]


  [...]
@ 0x5f86da8 0x5f5a1dc [...] 0x29e4d4e 0xa200316 0xabb2988 [...]


  t*: 13: 6688 [0: 0]


  t3: 12: 6496 [0: ]


  t99: 1: 192 [0: 0]
[...]
MAPPED_LIBRARIES:
[...]




The following matches the above heap profile, but most tokens are
    replaced with <description> to indicate descriptions of the
    corresponding fields.






<heap_profile_format_version>/<mean_sample_interval>


  <aggregate>: <curobjs>: <curbytes> [<cumobjs>: <cumbytes>]


  [...]


  <thread_3_aggregate>: <curobjs>: <curbytes>[<cumobjs>: <cumbytes>]


  [...]


  <thread_99_aggregate>: <curobjs>: <curbytes>[<cumobjs>: <cumbytes>]


  [...]
@ <top_frame> <frame> [...] <frame> <frame> <frame> [...]


  <backtrace_aggregate>: <curobjs>: <curbytes> [<cumobjs>: <cumbytes>]


  <backtrace_thread_3>: <curobjs>: <curbytes> [<cumobjs>: <cumbytes>]


  <backtrace_thread_99>: <curobjs>: <curbytes> [<cumobjs>: <cumbytes>]
[...]
MAPPED_LIBRARIES:
</proc/<pid>/maps>










When debugging, it is a good idea to configure/build jemalloc with
    the --enable-debug and --enable-fill options, and recompile
    the program with suitable options and symbols for debugger support. When so
    configured, jemalloc incorporates a wide variety of run-time assertions that
    catch application errors such as double-free, write-after-free, etc.


Programs often accidentally depend on
    “uninitialized” memory actually being filled with zero bytes.
    Junk filling (see the opt.junk option) tends to expose such bugs in the form
    of obviously incorrect results and/or coredumps. Conversely, zero filling
    (see the opt.zero option) eliminates the symptoms of such bugs. Between
    these two options, it is usually possible to quickly detect, diagnose, and
    eliminate such bugs.


This implementation does not provide much detail about the
    problems it detects, because the performance impact for storing such
    information would be prohibitive.








If any of the memory allocation/deallocation functions detect an
    error or warning condition, a message will be printed to file descriptor
    STDERR_FILENO. Errors will result in the process dumping core. If the
    opt.abort option is set, most warnings are treated as errors.


The malloc_message variable allows the programmer to
    override the function which emits the text strings forming the errors and
    warnings if for some reason the STDERR_FILENO file descriptor is not
    suitable for this. malloc_message() takes the cbopaque pointer
    argument that is NULL unless overridden by the arguments in a call to
    malloc_stats_print(), followed by a string pointer. Please note that doing
    anything which tries to allocate memory in this function is likely to result
    in a crash or deadlock.


All messages are prefixed by “<jemalloc>:
  ”.










Standard API


The malloc() and calloc() functions return a pointer to the
    allocated memory if successful; otherwise a NULL pointer is returned
    and errno is set to ENOMEM.


The posix_memalign() function returns the value 0 if successful;
    otherwise it returns an error value. The posix_memalign() function will fail
    if:


EINVAL


The alignment parameter is not a power of 2 at
  least as large as sizeof(void *).


ENOMEM


Memory allocation error.


The aligned_alloc() function returns a pointer to the allocated
    memory if successful; otherwise a NULL pointer is returned and
    errno is set. The aligned_alloc() function will fail if:


EINVAL


The alignment parameter is not a power of 2.


ENOMEM


Memory allocation error.


The realloc() function returns a pointer, possibly identical to
    ptr, to the allocated memory if successful; otherwise a NULL
    pointer is returned, and errno is set to ENOMEM if the error was the
    result of an allocation failure. The realloc() function always leaves the
    original buffer intact when an error occurs.


The free() function returns no value.






Non-standard API


The mallocx() and rallocx() functions return a pointer to the
    allocated memory if successful; otherwise a NULL pointer is returned
    to indicate insufficient contiguous memory was available to service the
    allocation request.


The xallocx() function returns the real size of the resulting
    resized allocation pointed to by ptr, which is a value less than
    size if the allocation could not be adequately grown in place.


The sallocx() function returns the real size of the allocation
    pointed to by ptr.


The nallocx() returns the real size that would result from a
    successful equivalent mallocx() function call, or zero if insufficient
    memory is available to perform the size computation.


The mallctl(), mallctlnametomib(), and mallctlbymib() functions
    return 0 on success; otherwise they return an error value. The functions
    will fail if:


EINVAL


newp is not NULL, and newlen is too
  large or too small. Alternatively, *oldlenp is too large or too small;
  in this case as much data as possible are read despite the error.


ENOENT


name or mib specifies an unknown/invalid
  value.


EPERM


Attempt to read or write void value, or attempt to write
  read-only value.


EAGAIN


A memory allocation failure occurred.


EFAULT


An interface with side effects failed in some way not
  directly related to mallctl*() read/write processing.


The malloc_usable_size() function returns the usable size of the
    allocation pointed to by ptr.










The following environment variable affects the execution of the
    allocation functions:


MALLOC_CONF


If the environment variable MALLOC_CONF is set,
  the characters it contains will be interpreted as options.








To dump core whenever a problem occurs:






ln -s 'abort:true' /etc/malloc.conf




To specify in the source that only one arena should be
    automatically created:






malloc_conf = "narenas:1";










madvise(2), mmap(2), sbrk(2),
    utrace(2), alloca(3), atexit(3),
  getpagesize(3)








The malloc(), calloc(), realloc(), and free() functions conform to
    ISO/IEC 9899:1990 (“ISO C90”).


The posix_memalign() function conforms to IEEE Std 1003.1-2001
    (“POSIX.1”).








Jason Evans











  
 1.

  
jemalloc website




http://jemalloc.net/



  
 2.

  
JSON format




http://www.json.org/



  
 3.

  
gperftools package




http://code.google.com/p/gperftools/







  

    02/23/2019
    jemalloc 5.1.0-0-g61efbda7098d