DOKK / manpages / debian 10 / libsane-common / sane-umax1220u.5.en
sane-umax1220u(5) SANE Scanner Access Now Easy sane-umax1220u(5)

sane-umax1220u - SANE backend for the UMAX Astra 1220U and similar scanners

The sane-umax1220 library implements a SANE (Scanner Access Now Easy) backend for the the UMAX Astra 1220U and similar scanners.

For more information on this backend, please visit http://umax1220u-sane.sourceforge.net/.

This backend is also able to drive the UMAX Astra 1600U/2000U/2100U. The 2100U is confirmed to work. For the other scanners no reports have been received yet. Please contact us and tell us if your scanner works (sane-devel@lists.alioth.debian.org).

Usually, no manual configuration is necessary. The configuration file for this backend resides in @CONFIGDIR@/umax1220u.conf.

Its contents is a list of device names that correspond to UMAX Astra scanners. Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is shown below:



 #usb vendor product


 usb 0x1606 0x0010


 # Device list for non-linux systems


 /dev/scanner 


 /dev/usb/scanner0

See sane-usb(5) for information on how to set the access permissions on the usb device files.

@CONFIGDIR@/umax1220u.conf
@LIBDIR@/libsane-umax1220u.a
@LIBDIR@/libsane-umax1220u.so (present on systems that support dynamic loading)

If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity:

SANE_DEBUG_UMAX1220U values

Number  Remark
 


 1       print failures


 2       print information


 3       print high-level function calls


 4       print high-level function checkpoints


 9       print mid-level function calls


 10      print mid-level function checkpoints


 80      print protocol-level function entry


 90      print protocol-level function exit

export SANE_DEBUG_UMAX1220U=10

600 dpi scanning may fail for large image sizes.

If you keep getting I/O errors, try cycling the power on your scanner to reset it.

There is no way to cancel a scan, since the driver ignores sane_cancel().

If you try scanning an image which is too small, you will get I/O errors. Be sure to adjust the scan area before doing a scan, since by default, the scan area is zero.

sane(7), sane-usb(5)

(Old) homepage:
http://umax1220u-sane.sourceforge.net/

Marcio Luis Teixeira <marciot@users.sourceforge.net>

sane-devel@lists.alioth.debian.org

This backend isn't actively maintained. Nevertheless, bug reports and comments should be sent to the sane-devel mailing list. When reporting bugs, please run the backend with SANE_DEBUG_UMAX1220U set to 10 and attach a copy of the log messages.

14 Jul 2008 @PACKAGEVERSION@