How does it work?

"Test::Inline" lets you write small fragments of general or function-specific testing code, and insert it anywhere you want in your modules, inside a specific tagged POD segment, like the following.

  =begin testing
  
  # This code assumes we have a cpuinfo file
  ok( -f /proc/cpuinfo, 'Host has a standard /proc/cpuinfo file' );
  
  =end testing
  
  =begin testing label
  
  # Test generation of the <label> HTML tag
  is( My::HTML->label('foo'),        '<label>foo</label>',           '->label(simple) works' );
  is( My::HTML->label('bar', 'foo'), '<label for="bar">foo</label>', '->label(for) works'    );
  
  =end testing

You can add as many, or as few, of these chunks of tests as you wish. The key condition when writing them is that they should be logically independent of each other. Each chunk of testing code should not die or crash if it is run before or after another chunk.

Using inline2test or another test compiler, you can then transform these chunks in a test script, or an entire tree of modules into a complete set of standard Test::More-based test scripts.

These test scripts can then be executed as normal.

What is Test::Inline good for?

"Test::Inline" is incredibly useful for doing ad-hoc unit testing.

In any large groups of modules, you can add testing code here, there and everywhere, anywhere you want. The next time the test compiler is run, a new test script will just appear.

This also makes it great for testing assumptions you normally wouldn't bother to write run-time code to test. It ensures that your assumptions about the way Perl does some operation, or about the state of the host, are confirmed at install-time.

If your assumption is ever wrong, it gets picked up at install-time and based on the test failures, you can correct your assumption.

It's also extremely useful for systematically testing self-contained code.

That is, any code which can be independent tested without the need for external systems such as databases, and that has no side-effects on external systems.

All of this code, written by multiple people, can then have one single set of test files generated. You can check all the bits and pieces of a large API, or anything you like, in fine detail.

Test::Inline also introduces the concept of unit-tested documentation.

Not only can your code be tested, but if you have a FAQ or some other pure documentation module, you can validate that the documentation is correct for the version of the module installed.

If the module ever changes to break the documentation, you can catch it and correct the documentation.

What is Test::Inline bad for?

"Test::Inline" is not a complete testing solution, and there are several types of testing you probably DON'T want to use it for.

• Static testing across the entire codebase
• Functional testing
• Tests with side-effects such as those that might change a testing database

Getting Started

Because Test::Inline creates test scripts with file names that don't start with a number (for ordering purposes), the first step is to create your normal test scripts using file names in the CPAN style of 01_compile.t, 02_main.t, 03_foobar.t, and so on.

You can then add your testing fragments wherever you like throughout your code, and use the inline2test script to generate the test scripts for the inline tests. By default the test scripts will be named after the packages/classes that the test fragments are found in.

Tests for Class::Name will end up in the file "class_name.t".

These test files sit quite happily alongside your number test scripts.

When you run the test suite as you normally would, the inline scripts will be run after the numbered tests.

new

  my $Tests = Test::Inline->new(
      verbose  => 1,
      readonly => 1,
      output   => 'auto',
      manifest => 'auto/manifest',
  );

The "new" constructor creates a new test generation framework. Once the constructor has been used to create the generator, the "add_class" method can be used to specify classes, or class heirachies, to generate tests for.

verbose - The "verbose" option causes the generator to write state and debugging information to STDOUT as it runs.

manifest - The "manifest" option, if provided, will cause a manifest file to be created and written to disk. The manifest file contains a list of all the test files generated, but listed in the preferred order they should be processed to best satisfy the class-level dependency of the tests.

check_count - The "check_count" value controls how strictly the test script will watch the number of tests that have been executed.

When set to false, the script does no count checking other than the standard total count for scripts (where all section counts are known)

When set to 1 (the default), "Test::Inline" does smart count checking, doing section-by-section checking for known-count sections only when the total for the entire script is not known.

When set to 2 or higher, "Test::Inline" does full count checking, doing section-by-section checking for every section with a known number of tests.

file_content - The "file_content" option should be provided as a CODE reference, which will be passed as arguments the "Test::Inline" object, and a single Test::Inline::Script object, and should return a string containing the contents of the resulting test file. This will be written to the "OutputHandler".

output - The "output" option provides the location of the directory where the tests will be written to. It should both already exist, and be writable. If using a custom "OutputHandler", the value of "output" should refer to the location within the OutputHandler that the files will be written to.

readonly - The "readonly" option, if provided, indicates that any generated test files should be created (or set when updated) with read-only permissions, to prevent accidentally adding to or editing the test scripts directly (instead of via the classes).

This option is currently disabled by default, by may be enabled by default in a future release, so if you do NOT want your tests being created as read-only, you should explicitly set this option to false.

InputHandler - The "InputHandler" option, if provided, supplies an alternative "FileHandler" from which source modules are retrieved.

OuputHandler - The "OutputHandler" option, if provided, supplies an alternative "FileHandler" to which the resulting test scripts are written.

Returns a new "Test::Inline" object on success.

Returns "undef" if there is a problem with one of the options.

exception

The "exception" method returns a flag which indicates whether error will be returned via exceptions.

InputHandler

The "InputHandler" method returns the file handler object that will be used to find and load the source code.

ExtractHandler

The "ExtractHandler" accessor returns the object that will be used to extract the test sections from the source code.

ContentHandler

The "ContentHandler" accessor return the script content generation handler.

OutputHandler

The "OutputHandler" accessor returns the file handler object that the generated test scripts will be written to.

add $file, $directory, \$source, $Handle

The "add" method is a parameter-sensitive method for adding something to the build schedule.

It takes as argument a file path, a directory path, a reference to a SCALAR containing perl code, or an IO::Handle (or subclass) object. It will retrieve code from the parameter as appropriate, parse it, and create zero or more Test::Inline::Script objects representing the test scripts that will be generated for that source code.

Returns the number of test scripts added, which could be zero, or "undef" on error.

add_class

  $Tests->add_class( 'Foo::Bar' );
  $Tests->add_class( 'Foo::Bar', recursive => 1 );

The "add_class" method adds a class to the list of those to have their tests generated. Optionally, the "recursive" option can be provided to add not just the class you provide, but all classes below it as well.

Returns the number of classes found with inline tests, and added, including 0 if no classes with tests are found. Returns "undef" if an error occurs while adding the class or it's children.

add_all

The "add_all" method will search the "InputHandler" for all *.pm files, and add them to the generation set.

Returns the total number of test scripts added, which may be zero, or "undef" on error.

classes

The "classes" method returns a list of the names of all the classes that have been added to the "Test::Inline" object, or the null list "()" if nothing has been added.

class

For a given class name, fetches the Test::Inline::Script object for that class, if it has been added to the "Test::Inline" object. Returns "undef" if the class has not been added to the "Test::Inline" object.

filenames

For all of the classes added, the "filenames" method generates a map of the filenames that the test files for the various classes should be written to.

Returns a reference to a hash with the classes as keys, and filenames as values.

Returns 0 if there are no files to write.

Returns "undef" on error.

schedule

While the "filenames" method generates a map of the files for the various classes, the "schedule" returns the list of file names in the order in which they should actually be executed.

Returns a reference to an array containing the file names as strings.

Returns 0 if there are no files to write.

Returns "undef" on error.

manifest

The "manifest" generates the contents of the manifest file, if it is both wanted and needed.

Returns the contents of the manifest file as a normal string, false if it is either not wanted or needed, or "undef" on error.

save

  $Tests->save;

The "save" method generates the test files for all classes, and saves them to the "output" directory.

Returns the number of test files generated. Returns "undef" on error.