DOKK / manpages / debian 10 / mrtgutils / mrtg-load.1.en
MRTG-LOAD(1) MRTG helper utilities MRTG-LOAD(1)

mrtg-load - Returns the current load or uptime data

mrtg-load ([-l 1|5|15] [-m multiplier])*2

mrtg-load returns the system load averages for the past 1, 5, or 15 minutes. The output is written in a form useful as input for the MRTG utility. Every parameter can be accepted twice and allow to control the two values in the output.

Sets the system load average to display in the output. If none is set, only the 5 minutes average with be displyed in the second position.
Sets the multiplier to be used in the output. For example, with a load of 1.2 and a multiplier of 100, the output load average would be 120. Note that the option order is important. If it is defined once, affect both output values. The default multiplier is 1.

Prints the 5-minute average of the system load, multiplied by 100.

mrtg-load -m 100

Prints the 1-minute and 15-minute averages of the system load. The firs one multipled by 10, the second one by 100.

mrtg-load -l 1 -m 10 -l 15 -m 100

mrtg(1)

Randolph Chung <tausq@debian.org> is the orginal writer of mrtgutils.

This document first appeared with mrtgutils-0.1

2018-12-20 mrtgutils 0.1