NAME

apcupsd-ups - Driver for apcupsd client access

NOTE

This man page only documents the specific features of the apcupsd-ups driver. For information about the core driver, see nutupsdrv(8).

DESCRIPTION

This driver is a client to apcupsd.

apcupsd-ups acts as an apcupsd client, simply forwarding data. This can be useful in cases where both protocols are required in a network, or in case apcupsd has a required UPS access mode missing from NUT.

EXTRA ARGUMENTS

This driver supports the following optional settings in nut.conf(5):

port=<hostname>[:<port>]

This is the name of a remote host running apcupsd (plus an optional port).

For instance:

[apcupsd]


            driver = apcupsd-ups


            port = localhost


            desc = "apcupsd client"

BACKGROUND

This driver was originally written in one evening to allow interworking with apcupsd.

SUPPORTED VARIABLES

The following variables are translated from apcupsd to NUT. All times should be converted to seconds (please file a bug if you notice a mismatch in units).

apcupsd variable	NUT variable(s)
BCHARGE	battery.charge
MBATTCHG	battery.charge.low
RETPCT	battery.charge.restart
BATTDATE	battery.date
TIMELEFT	battery.runtime
MINTIMEL	battery.runtime.low
BATTV	battery.voltage
NOMBATTV	battery.voltage.nominal
LINEFREQ	input.frequency
SENSE	input.sensitivity
HITRANS	input.transfer.high
LOTRANS	input.transfer.low
LASTXFER	input.transfer.reason
LINEV	input.voltage
MAXLINEV	input.voltage.maximum
MINLINEV	input.voltage.minimum
NOMINV	input.voltage.nominal
LINEFREQ	output.frequency
OUTPUTV	output.voltage
NOMOUTV	output.voltage.nominal
DATE	ups.date, ups.time
DSHUTD	ups.delay.shutdown
DWAKE	ups.delay.start
FIRMWARE	ups.firmware, ups.firmware.aux
UPSNAME	ups.id
LOADPCT	ups.load
MANDATE	ups.mfr.date
NOMPOWER	ups.realpower.nominal
SERIALNO	ups.serial
STATUS	ups.status
ITEMP	ups.temperature
STESTI	ups.test.interval
SELFTEST	ups.test.result

LIMITATIONS

Access to apcupsd is strictly read only: no commands can be issued. This stems from the design of apcupsd, where the settings are changed in apctest. In order to run apctest, apcupsd must be stopped (and apcupsd exposes the UPS to the network).

AUTHOR

Andreas Steinmetz