"MAXAGE seconds"
upsd usually allows a driver to stop responding for up to
15 seconds before declaring the data "stale". If your driver takes a
very long time to process updates but is otherwise operational, you can use
MAXAGE to make upsd wait longer.
Most users should leave this at the default value.
"STATEPATH path"
Tell upsd to look for the driver state sockets in
path rather than the default that was compiled into the program.
"LISTEN interface port"
Bind a listening port to the interface specified by its
Internet address. This may be useful on hosts with multiple interfaces. You
should not rely exclusively on this for security, as it can be subverted on
many systems.
Listen on TCP port port instead of the default value which
was compiled into the code. This overrides any value you may have set with
configure --with-port. If you don’t change it with configure
or this value, upsd will listen on port 3493 for this interface.
Multiple LISTEN addresses may be specified. The default is to bind
to 127.0.0.1 if no LISTEN addresses are specified (and ::1 if IPv6 support
is compiled in).
LISTEN 127.0.0.1
LISTEN 192.168.50.1
LISTEN ::1
LISTEN 2001:0db8:1234:08d3:1319:8a2e:0370:7344
This parameter will only be read at startup. You’ll need to
restart (rather than reload) upsd to apply any changes made here.
"MAXCONN connections"
This defaults to maximum number allowed on your system.
Each UPS, each LISTEN address and each client count as one connection. If the
server runs out of connections, it will no longer accept new incoming client
connections. Only set this if you know exactly what you’re doing.
"CERTFILE certificate file"
When compiled with SSL support with OpenSSL backend, you
can enter the certificate file here. The certificates must be in PEM format
and must be sorted starting with the subject’s certificate (server
certificate), followed by intermediate CA certificates (if applicable_ and the
highest level (root) CA. It should end with the server key. See
docs/security.txt or the Security chapter of NUT user manual for more
information on the SSL support in NUT.
"CERTPATH certificate database"
When compiled with SSL support with NSS backend, you can
enter the certificate path here. Certificates are stored in a dedicated
database (splitted in 3 files). Specify the path of the database
directory.
"CERTIDENT certificate name database
password"
When compiled with SSL support with NSS backend, you can
specify the certificate name to retrieve from database to authenticate itself
and the password required to access certificate related private key.
"CERTREQUEST certificate request level"
When compiled with SSL support with NSS backend and
client certificate validation (disabled by default, see
docs/security.txt), you can specify if upsd requests or requires
client’s' certificates. Possible values are :
•0 to not request to clients to provide any
certificate
•1 to require to all clients a
certificate
•2 to require to all clients a valid
certificate