DOKK / manpages / debian 10 / osmium-tool / osmium-fileinfo.1.en
OSMIUM-FILEINFO(1) OSMIUM-FILEINFO(1)

osmium-fileinfo - show information about an OSM file

osmium fileinfo [OPTIONS] OSM-FILE

Shows various information about OSM files such as the file type, bounding boxes in the header, etc.

This command will usually only read the file header. Use the –extended option to show more information.

Normally this command will output the data in human readable form. If the -j, –json option is used, the output will be in JSON format instead.

If the -g, –get option is used, only the value of the named variable will be printed.

The output is split into four sections:

This section shows the information available without opening the file itself. It contains the file name, the format deduced from the file name, the compression used and the size of the file in bytes.
This section shows the information available from the header of the file (if available, OPL files have no header). Any available bounding boxes are shown as well as header options such as the generator and file format version.
This section shows the information available from reading the whole file. It is only shown if the –extended option was used. It shows the actual bounding box calculated from the nodes in the file, the first and last timestamp of all objects in the file, a CRC32 checksum of the data in the file, the number of changesets, nodes, ways, and relations found in the file, whether the objects in the file were ordered by type (nodes, then ways, then relations) and id, and whether there were multiple versions of the same object in the file (history files and change files can have that). See the osmium-sort(1) man page for details of the expected ordering.
This section shows which metadata attributes are used in the file. It contains information which attributes are used by all objects in the file and which are only used by some objects. This section is only shown if the –extended option was used because the whole file has to be read.

This commands reads its input file only once, ie. it can read from STDIN.

Read the complete file and show additional information. The default is to read only the header of the file.
Get value of VARIABLE. Can not be used together with –json.
Show a list of all variable names.
Output in JSON format. Can not be used together with –get.
Read only objects of given type (node, way, relation, changeset). By default all types are read. This option can be given multiple times. This only takes effect if the –extended option is also used.

Show usage help.
Set verbose mode. The program will output information about what it is doing to STDERR.
–progress
Show progress bar. Usually a progress bar is only displayed if STDOUT and STDERR are detected to be TTY. With this option a progress bar is always shown. Note that a progress bar will never be shown when reading from STDIN or a pipe.
–no-progress
Do not show progress bar. Usually a progress bar is displayed if STDOUT and STDERR are detected to be a TTY. With this option the progress bar is suppressed. Note that a progress bar will never be shown when reading from STDIN or a pipe.

The format of the input file(s). Can be used to set the input format if it can't be autodetected from the file name(s). This will set the format for all input files, there is no way to set the format for some input files only. See osmium-file-formats(5) or the libosmium manual for details.

The following variables are available:

file.name - STRING
file.format - STRING: XML|PBF
file.compression - STRING: none|bzip2|gzip
file.size - INTEGER (always 0 when reading from STDIN)
header.with_history - BOOL (yes|no)
header.option.generator - STRING
header.option.version - STRING
header.option.pbf_dense_nodes - BOOL (yes|no)
header.option.osmosis_replication_timestamp - STRING with TIMESTAMP
header.option.osmosis_replication_sequence_number - INTEGER
header.option.osmosis_replication_base_url - STRING
data.bbox - BOX
    (in JSON as nested ARRAY with coordinates)
data.timestamp.first - STRING with TIMESTAMP
data.timestamp.last - STRING wih TIMESTAMP
data.objects_ordered - BOOL (yes|no)
data.multiple_versions - STRING (yes|no|unknown)
    (in JSON as BOOL and missing if "unknown")
data.crc32 - STRING with 8 hex digits
data.count.nodes - INTEGER
data.count.ways - INTEGER
data.count.relations - INTEGER
data.count.changesets - INTEGER
data.minid.nodes - INTEGER
data.minid.ways - INTEGER
data.minid.relations - INTEGER
data.minid.changesets - INTEGER
data.maxid.nodes - INTEGER
data.maxid.ways - INTEGER
data.maxid.relations - INTEGER
data.maxid.changesets - INTEGER
data.buffers.count - INTEGER
data.buffers.size - INTEGER
data.buffers.capcity - INTEGER
metadata.all_objects.version - BOOL (yes|no)
metadata.all_objects.timestamp - BOOL (yes|no)
metadata.all_objects.changeset - BOOL (yes|no)
metadata.all_objects.uid - BOOL (yes|no)
metadata.all_objects.user - BOOL (yes|no)
metadata.some_objects.version - BOOL (yes|no)
metadata.some_objects.timestamp - BOOL (yes|no)
metadata.some_objects.changeset - BOOL (yes|no)
metadata.some_objects.uid - BOOL (yes|no)
metadata.some_objects.user - BOOL (yes|no)

All timestamps are in the usual OSM ISO format yy-mm-ddThh::mm::ssZ. Boxes are in the format (xmin, ymin, xmax, ymax).

There are two variables for each metadata field. The metadata.all_objects.* variables are true if all objects in the file have the attribute. The metadata.some_objects.* variables are true if at least one object in the file has the attribute. Please note that objects last modified by anonymous users (until 2007) do not have user and uid attributes and can lead to wrong results.

osmium fileinfo exits with exit code

0
if everything went alright,
1
if there was an error processing the data, or
2
if there was a problem with the command line arguments.

osmium fileinfo does all its work on the fly and doesn't keep much data in main memory.

•
osmium(1), osmium-file-formats(5), osmium-sort(1)
•
Osmium website (https://osmcode.org/osmium-tool/)

Copyright (C) 2013-2018 Jochen Topf <jochen@topf.org>.

License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

If you have any questions or want to report a bug, please go to https://osmcode.org/contact.html

Jochen Topf <jochen@topf.org>.

1.10.0