DOKK / manpages / debian 10 / pfstools / pfshdrcalibrate.1.en
pfshdrcalibrate(1) General Commands Manual pfshdrcalibrate(1)

pfshdrcalibrate - Create an HDR image or calibrate a response curve from a set of differently exposed images supplied in PFS stream.

pfshdrcalibrate [--response <type>] [--calibration <type>] [--gauss <val>] [--response-file <filename.m>] [--save-response <filename.m>] [--multiplier <val>] [--bpp <val>] [--luminance] [--samples <val>] [--help] [--verbose]

Create an HDR image or calibrate a response curve from a set of differently exposed images supplied in PFS stream.

When used with 8bit images, luminance in the output HDR image corresponds to real world values in [cd/m^2] provided that hdrgen script contained correct information on exposure time, aperture and iso speed. Note that sometimes ISO speed indicated by camera does not correspond to standard (ISO-100 is in fact ISO-125).

The accuracy of absolute calibration has not been thoroughly tested with different camera models, however one can expect the relative measurement error below 8%. Use pfsabsolute in case of systematic error.

Allows one to choose from predefined response curves. This can be used either to apply this response or use it as an initialization for automatic self-calibration. Predefined response curves are: "linear", "gamma", "log". Default is "linear". This option can be used only with Robertson method.

Type of automatic self-calibration method used for recovery of the response curve and/or type of method used for HDR merging. Accepted types include: "robertson", "mitsunaga". "robertson" is the default and recommended algorithm (see commends in the Bugs section below). More information on the algorithms can be found in:

M.A. Robertson, S. Borman and R.L. Stevenson
Dynamic range improvement through multiple exposures
In: Proc. of International Conference on Image Processing 1999 (ICIP 99), pp 159-163 vol.3
and
T. Mitsunaga and S. K. Nayar
Radiometric Self Calibration
In: Proc on IEEE Conf. on Computer Vision and Pattern Recognition (CVPR'99). Volume 1, p. 1374

Sigma value for the Gaussian used as a weighting function (in the range 0-1). Applies to Robertson02 algorithm. Default value: 0.2

Use response curve saved in the matlab format file. Turns off automatic self-calibration. Uses Robertson02 or Mitsunaga99 model to apply the response curve (see -c option).

Saves the response curve calculated during automatic self-calibration stage in a matlab format file. Can be later reused for set of images captured with given camera. Also works fine for plotting with gnuplot.

Input multiplier value. Can be used to manipulate the range of source exposures. Default value for Robertson method is 256 since LDR images are by default scaled to 0..1. This value is set to 1.0 for Mitsunaga method.

Number of bits per pixel in input data from the camera. Default value is 8.

Number of samples used during the self-calibration in Mitsunaga algorithm. Default is 50000.

EXPERIMENTAL. Try to use a simple rejection criterion to reduce ghosting artifacts due to movement in dynamic scenes. This is currently not well implemented to the results can be disappointing.

Recovery of response curve will be performed for luminance channel only.

Print additional information during program execution.

Print list of command line options.

Recover the response curve from set of all JPEG files in the current directory and save it to response.m file. To view the response curve, use pfsplotresponse command.
Read Camera RAW images (from Canon), resize them so that the image width is equal or less 1200 pixels, merge them into an HDR image using all 16 bits and save as an Open EXR image.
Create an HDR image from exposures defined in sample.hdrgen using the response curve "response.m" and view it. Fix the problem with black values given to overexposed pixels.
Create an HDR image from exposures defined in sample.hdrgen using the default self-calibration method and view it.
Given that the script sample_dcraw.hdrgen refers to camera RAW files (see pfsindcraw), this example will generate an HDR image assuming a linear response.
Create an HDR image from exposures defined in sample.hdrgen using the default self-calibration method and view it.
Create an HDR image from exposures defined in sample.hdrgen using the mitsunaga self-calibration method with 100000 samples and save it to "resp_mitsunaga.m".

pfsplotresponse(1) pfsinhdrgen(1) jpeg2hdrgen(1) pfsview(1) pfsindcraw(1) pfsabsolute(1) pfsglview(1)

Currently Mitsunaga and Nayar's method does not produce reliable camera response curves. Robertson's method should be used instead.

Robertson's method may banding or wrong colors in strongly over-saturated and under-saturated areas. For best results, there should be a sufficient numbers of exposures in which no pixels is over- or under-saturated in all the exposures. It is possible to fix these issues with some heuristics (as most HDR merging software does), but it is currently not done in this release. pfscalibration was meant to be used for research purposes and getting accurate result is more important than generating good looking images. The heuristics could hide the well visible artifacts, but would also introduce error to the measurements.

For any other issues please report bugs and comments on implementation to the discussion group http://groups.google.com/group/pfstools