| srec_mips_flash.5(5) | File Formats Manual | srec_mips_flash.5(5) |
srec_mips_flash - MIPS‐Flash file format
The MIPS SDE tool chain has a convert program that is able to output this format. I have no idea what reads it, some kind of flash programmer I suppose.
The file must start with '!R' to reset the state machine. White space appears to be ignored, except as it serves to separate tokens.
Data is presented as 32‐bit hexadecimal numbers, in the normal big‐endian text number format. To write them to memory, you have to know if the target is big‐endian or little‐endian. for little endian targets, reverse the order of the bytes in this number.
The eight bytes following a '>' are a sort of comment. The SDE code reads like they are displayed in the flash programmer as a kind of progress indicator.
The number following '@' is a new address for the following data.
Each segment must be erased before it can be written, this is done with the '!E' command. Each segment is assumed to be 128kB in size.
Special segments must unlocked (with the '!C' command) and locked again (with the '!S' command).
This file format contains no checksum mechanism.
This format is specified using one of the -Mips‐Flash‐Big_Endian or -Mips‐Flash‐Little_Endian options. The endian‐ness must be specified on the command line, because there is nothing in the file contents to indicate the endian‐ness of the data it contains.
In general, binary data will expand in sized by approximately 2.3 times when represented with this format (worse if you use shorter lines).
Here is an example MIPS‐Flash file. It contains the data “Hello, World” to be loaded at bytes address 0x0000 (but remember, the file contents are always multiples of four bytes).
!R >00000xxx @00000000 !E @00000000 >00000000 48656C6C 6F2C2057 6F726C64 210A0000 >#DL_DONE >FINISHED
srec_cat version 1.64
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
2008, 2009, 2010, 2011, 2012, 2013, 2014 Peter Miller
The srec_cat program comes with ABSOLUTELY NO WARRANTY; for
details use the 'srec_cat -VERSion License' command. This is free
software and you are welcome to redistribute it under certain conditions;
for details use the 'srec_cat -VERSion License' command.
| Scott Finneran | E‐Mail: | scottfinneran@yahoo.com.au |
| Peter Miller | E‐Mail: | pmiller@opensource.org.au |
srec_cat version 1.64
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
2008, 2009, 2010, 2011, 2012, 2013, 2014 Peter Miller
The srec_cat program comes with ABSOLUTELY NO WARRANTY; for
details use the 'srec_cat -VERSion License' command. This is free
software and you are welcome to redistribute it under certain conditions;
for details use the 'srec_cat -VERSion License' command.
| Scott Finneran | E‐Mail: | scottfinneran@yahoo.com.au |
| Peter Miller | E‐Mail: | pmiller@opensource.org.au |
| SRecord | Reference Manual |