esreverse - reverse an es stream
esreverse [switches] <infile>
<outfile>
- TS tools version 1.11, esreverse built Nov 11 2008 17:15:47
- Output a reversed stream derived from the input H.264 (MPEG-4/AVC) or
H.262 (MPEG-2) elementary stream.
- If output is to an H.222 Transport Stream, then fixed values for the PMT
PID (0x66) and video PID (0x68) are used.
- <infile>
- is the input elementary stream.
- <outfile> is the output stream, either an equivalent elementary
- stream, or an H.222 Transport Stream (but see -stdout and
-host below).
- -verbose,
-v
- Output additional (debugging) messages
- -quiet,
-q
- Only output error messages
- -stdout
- Write output to <stdout>, instead of a named file Forces
-quiet.
- -host <host>,
-host <host>:<port>
- Writes output (over TCP/IP) to the named <host>, instead of to a
named file. If <port> is not specified, it defaults to 88. Implies
-tsout.
- -max <n>, -m
<n>
- Maximum number of frames to read
- -freq
<n>
- Specify the frequency of frames to try to keep when reversing. Defaults to
8.
- -tsout
- Output H.222 Transport Stream
- -pes, -ts
- The input file is TS or PS, to be read via the PES->ES reading
mechanisms
- -server
- Also output as normal forward video as reversal data is being collected.
Implies -pes and -tsout.
- -x
- Temporary extra debugging information
Stream type:
- If input is from a file, then the program will look at the start of the
file to determine if the stream is H.264 or H.262 data. This process may
occasionally come to the wrong conclusion, in which case the user can
override the choice using the following switches.
- -h264,
-avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
- TS tools version 1.11, esreverse built Nov 11 2008 17:15:47
- Output a reversed stream derived from the input H.264 (MPEG-4/AVC) or
H.262 (MPEG-2) elementary stream.
- If output is to an H.222 Transport Stream, then fixed values for the PMT
PID (0x66) and video PID (0x68) are used.
- <infile>
- is the input elementary stream.
- <outfile> is the output stream, either an equivalent elementary
- stream, or an H.222 Transport Stream (but see -stdout and
-host below).
- -verbose,
-v
- Output additional (debugging) messages
- -quiet,
-q
- Only output error messages
- -stdout
- Write output to <stdout>, instead of a named file Forces
-quiet.
- -host <host>,
-host <host>:<port>
- Writes output (over TCP/IP) to the named <host>, instead of to a
named file. If <port> is not specified, it defaults to 88. Implies
-tsout.
- -max <n>,
-m <n>
- Maximum number of frames to read
- -freq
<n>
- Specify the frequency of frames to try to keep when reversing. Defaults to
8.
- -tsout
- Output H.222 Transport Stream
- -pes,
-ts
- The input file is TS or PS, to be read via the PES->ES reading
mechanisms
- -server
- Also output as normal forward video as reversal data is being collected.
Implies -pes and -tsout.
- -x
- Temporary extra debugging information
Stream type:
- If input is from a file, then the program will look at the start of the
file to determine if the stream is H.264 or H.262 data. This process may
occasionally come to the wrong conclusion, in which case the user can
override the choice using the following switches.
- -h264,
-avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
The full documentation for esreverse is maintained as a
Texinfo manual. Please check http://tstools.berlios.de for more
information.