xedit - simple text editor for X
xedit [ -toolkitoption ... ] [ filename ...
]
Xedit provides a window consisting of the following four
areas:
- Commands
Section
- A set of commands that allow you to exit xedit, save the file, or
load a new file into the edit window.
- Message Window
- Displays xedit messages. In addition, this window can be also used
as a scratch pad.
- Filename
Display
- Displays the name of the file currently being edited, and whether this
file is Read-Write or Read Only.
- Edit Window
- Displays the text of the file that you are editing or creating.
Xedit accepts all of the standard X Toolkit command line
options (see X(7)). The order of the command line options is not
important.
- filename
- Specifies the file(s) that are to be loaded during start-up. This is the
file which will be edited. If a file is not specified, xedit lets
you load files or create new files after it has started up.
The Athena Text widget is used for the three sections of this
application that allow text input. The characters typed will go to the Text
widget that has the input focus, or the Text widget that the pointer cursor
is currently over.
The following keystroke combinations are defined:
| Ctrl-a |
Beginning Of Line |
| Meta-b |
Backward Word |
| Ctrl-b |
Backward Character |
| Meta-f |
Forward Word |
| Ctrl-d |
Delete Next Character |
| Meta-i |
Insert File |
| Ctrl-e |
End Of Line |
| Meta-k |
Kill To End Of Paragraph |
| Ctrl-f |
Forward Character |
| Meta-q |
Form Paragraph |
| Ctrl-g |
Keyboard Reset |
| Meta-v |
Previous Page |
| Ctrl-h |
Delete Previous Character |
| Meta-y |
Insert Current Selection |
| Ctrl-j |
Newline And Indent |
| Meta-z |
Scroll One Line Down |
| Ctrl-k |
Kill To End Of Line |
| Meta-d |
Delete Next Word |
| Ctrl-l |
Redraw Display |
| Meta-D |
Kill Word |
| Ctrl-m |
Newline |
| Meta-h |
Delete Previous Word |
| Ctrl-n |
Next Line |
| Meta-H |
Backward Kill Word |
| Ctrl-o |
Newline And Backup |
| Meta-< |
Beginning Of File |
| Ctrl-p |
Previous Line |
| Meta-> |
End Of File |
| Ctrl-r |
Search/Replace Backward |
| Meta-] |
Forward Paragraph |
| Ctrl-s |
Search/Replace Forward |
| Meta-[ |
Backward Paragraph |
| Ctrl-t |
Transpose Characters |
| Ctrl-u [number] |
Multiply by 4 or number |
| Meta-Delete |
Delete Previous Word |
| Ctrl-v |
Next Page |
| Meta-Shift Delete |
Kill Previous Word |
| Ctrl-w |
Kill Selection |
| Meta-Backspace |
Delete Previous Word |
| Ctrl-y |
Unkill |
| Meta-Shift Backspace |
Kill Previous Word |
| Ctrl-z |
Scroll One Line Up |
| Meta-z |
Scroll One Line Down |
| Ctrl-_ |
Undo |
| Escape |
Line Edit Mode |
In addition, the pointer may be used to cut and paste text:
| Button 1 Down |
Start Selection |
| Button 1 Motion |
Adjust Selection |
| Button 1 Up |
End Selection (cut) |
| Button 2 Down |
Insert Current Selection (paste) |
| Button 3 Down |
Extend Current Selection |
| Button 3 Motion |
Adjust Selection |
| Button 3 Up |
End Selection (cut) |
Line edit mode enables several shortcut commands for
searching and replacing text in a xedit buffer. Line edit mode
commands have the format:
[line-number[,line-number]]command[parameters]
Line number may be specified as:
- .
- The current text line.
- $
- The last line of the file.
- number
- The literal line number.
- - or ^
- The previous line. Equivalent to -1.
- -number or ^number
- The current line minus number.
- +
- The next line. Equivalent to +1.
- +number
- The current line plus number.
- , or %
- From the first to the last line. Equivalent to 1,$.
- ;
- From the current to the last line. Equivalent to .,$.
Command may be specified as:
- s
- Substitute text in the specified lines.
- /re/
- Search forward for the regular expression pattern re.
- ?re?
- Search backward for the regular expression pattern re.
Parameters may be specified as:
- /re/
- Works as a parameter to i or as a command.
- /re/text/
- Search forward for re and substitute by text.
Options may follow or be parameters, known values are:
- i
- Case insensitive search.
- g
- Global match when replacing text. Unless specified, only the nth,
that defaults to 1, match will be replaced.
- c
- Confirm before replacing text.
- number
- Replace only the occurrence referenced by number.
Commands accept some variations, examples:
/pattern/i
i/pattern/
i/pattern
Search forward for pattern.
,sc/pattern/text
,sc/pattern/text/
,s/pattern/text/c
Search the entire buffer and ask confirmation to replace pattern with
text.
,s/pattern/text/number
Replace the match number in the text line. If not specified, defaults to
the first occurrence.
When searching for text, type <Return> to go to the next
match. When interactively replacing text, type y or Y to
accept the change, and n or N to ignore it and go to the next
match.
- Quit
- Quits the current editing session. If any changes have not been saved,
xedit displays a warning message, allowing the user to save
them.
- Save
- If file backups are enabled (see RESOURCES, below) xedit stores a
copy of the original, unedited file in
<prefix>file<suffix>, then overwrites the file
with the contents of the edit window. The filename is retrieved from the
Text widget directly to the right of the Load button.
- Load
- Loads the file named in the text widget immediately to the right of the
this button and displays it in the Edit window.
For xedit the available resources are:
- tagsName
(Class TagsName)
- Specifies the name of the tags file to search when loading a new file.
Default value is tags.
- loadTags
(Class LoadTags)
- Boolean value to enable or disabling searching for tags files. Default is
True.
- enableBackups
(Class EnableBackups)
- Specifies that, when edits made to an existing file are saved,
xedit is to copy the original version of that file to
<prefix>file<suffix> before it saves the changes. The
default value for this resource is ``on,'' stating that backups should be
created.
- backupNamePrefix
(Class BackupNamePrefix)
- Specifies a string that is to be prepended to the backup filename. The
default is that no string shall be prepended.
- backupNameSuffix
(Class BackupNameSuffix)
- Specifies a string that is to be appended to the backup filename. The
default is to use ``~'' as the suffix.
- positionFormat
(Class Format)
- Specifies a format string used to display the cursor position. This string
uses printf(3) like notation, where %l prints the line number,
%c prints the column number, %p prints the insert position
offset, and %s prints the current file size. It is also allowed to
specify field sizes, with the notation %-?[0-9]+ . The default
format string is ``L%l'', which shows the character ``L'' followed by the
line number.
- hints (Class
Hints)
- Specifies a list of strings, separated by new lines, that will be
displayed in the bc_label window.
- hintsInterval
(Class Interval)
- Specifies the interval in seconds, which the hint string in the bc_label
window will be changed.
- changedBitmap
(Class Bitmap)
- Specifies the name of the Bitmap that will be displayed in the fileMenu,
when the file being edited is changed.
- autoReplace
(Class Replace)
- This resource is useful to automatically correct common misspelling
errors, but can also be used to create simple macros. The format is
{non-blanks}{blanks}[{string}]. Fields are separated by newlines.
Example of use:
nto not\n\
/macro some long string with \\\n newlines \\\n
Will automatically replace the word nto by not,
and /macro by some long string with
newlines when you type that words.
- ispell.dictionaries
(Class ispell.Dictionary)
- Specifies a list of dictionary names, separated by spaces, available to
the ispell program. The default value is "american americamed+
english".
- ispell.dictionary
(Class ispell.Dictionary)
- Specifies the default dictionary to use.
- ispell*<DICTIONARY>.wordChars
(Class ispell*Chars)
- Specifies a set of characters that can be part of a legal word. The
<DICTIONARY> field is one of the dictionaries specified in
the dictionaries resource.
- ispell.ispellCommand
(Class ispell.CommandLine)
- The path to the ispell program, and possibly, additional arguments. You
don't need to specify the ``-w'' option, neither the ``-a'' option. Refer
to the ispell(1) manpage for more information on ispell
options.
- ispell.formatting
(Class ispell.TextFormat)
- Specifies which text formatting to use while spell checking the file. The
available formats are text and html.
- ispell*text.skipLines
(Class ispell*text.Skip)
- Lines starting with one of the characters in this string will not be spell
checked. This resource is only used in text mode.
- ispell.terseMode
(Class ispell.Terse)
- When enabled, runs ispell in terse mode, not asking user interaction for
words generated through compound formation (when using the ispell ``-C''
option), or words generated through affix removal. The default value is
False.
- ispell.lookCommand
(Class ispell.CommandLine)
- The path to the program to search for alternate words, and possibly,
additional arguments. The default program used is
/usr/bin/egrep.
- ispell.wordsFile
(Class ispell.Words)
- The path to the file[s] to search for alternate words. The default file is
/usr/share/dict/words.
- ispell.guessLabel
(Class ispell.Status)
- String displayed in the ispell status bar when ispell returns a guess list
of one or more words. The default value is Guess.
- ispell.missLabel
(Class ispell.Status)
- String displayed in the ispell status bar when ispell returns a list of
one or more words to match a misspelled one. The default value is
Miss.
- ispell.rootLabel
(Class ispell.Status)
- String displayed in the ispell status bar when the word is not in the
dictionary, but it can be formed through a root one. The default value is
Root:, and is followed by a space and the root word.
- ispell.noneLabel
(Class ispell.Status)
- String displayed in the ispell status bar when there is no near misses.
The default value is None.
- ispell.compoundLabel
(Class ispell.Status)
- String displayed in the ispell status bar when the word being checked is
formed by concatenation of two words. The default value is
Compound.
- ispell.okLabel
(Class ispell.Status)
- String displayed in the ispell status bar when the checked word is in the
dictionary. This string is only displayed when using the check
button in the xedit ispell interface. The default value is Ok.
- ispell.eofLabel
(Class ispell.Status)
- The string displayed in the ispell status bar when the end of the file is
reached. The default value is End Of File.
- ispell.repeatLabel
(Class ispell.Status)
- The string displayed in the ispell status bar when two identical words are
found together in the file. The default value is Repeat.
- ispell.lookLabel
(Class ispell.Status)
- The string displayed in the ispell status bar after displaying the results
of the Look command. If no results are found, the value of the
ispell.noneLabel resource is shown.
- ispell.workingLabel
(Class ispell.Status)
- The string displayed in the ispell status bar while xedit is communicating
with ispell. The default value is ....
In order to specify resources, it is useful to know the hierarchy
of the widgets which compose xedit. In the notation below,
indentation indicates hierarchical structure. The widget class name is given
first, followed by the widget instance name.
Xedit xedit
Paned paned
Paned buttons
Command quit
Command save
Command load
Text filename
Label bc_label
Text messageWindow
Label labelWindow
Text editWindow
- DISPLAY
- to get the default host and display number.
- XENVIRONMENT
- to get the name of a resource file that overrides the global resources
stored in the RESOURCE_MANAGER property.
- /etc/X11/app-defaults/Xedit
- specifies required resources
Xedit is not a replacement to Emacs.
Copyright 1988, Digital Equipment Corporation.
Copyright 1989, X Consortium
Copyright 1998, The XFree86 Project
See X(7) for a full statement of rights and permissions.
Chris D. Peterson, MIT X Consortium
Paulo Cesar Pereira de Andrade, The XFree86 Project