apt-ftparchive - Utility to generate index files
apt-ftparchive [-dsq] [--md5]
[--delink] [--readonly] [--contents]
[--arch architecture]
[-o=config_string]
[-c=config_file]
{packages path... [override-file [pathprefix]]
|
sources path... [override-file [pathprefix]]
| contents path | release path |
generate config_file section... |
clean config_file | {-v | --version} |
{-h | --help}}
apt-ftparchive is the command line tool that generates the
index files that APT uses to access a distribution source. The index files
should be generated on the origin site based on the content of that
site.
apt-ftparchive is a superset of the
dpkg-scanpackages(1) program, incorporating its entire functionality
via the packages command. It also contains a contents file generator,
contents, and an elaborate means to 'script' the generation process for a
complete archive.
Internally apt-ftparchive can make use of binary databases
to cache the contents of a .deb file and it does not rely on any external
programs aside from gzip(1). When doing a full generate it
automatically performs file-change checks and builds the desired compressed
output files.
Unless the -h, or --help option is given, one of the
commands below must be present.
packages
The packages command generates a package file from a
directory tree. It takes the given directory and recursively searches it for
.deb files, emitting a package record to stdout for each. This command is
approximately equivalent to
dpkg-scanpackages(1).
The option --db can be used to specify a binary caching
DB.
sources
The sources command generates a source index file from a
directory tree. It takes the given directory and recursively searches it for
.dsc files, emitting a source record to stdout for each. This command is
approximately equivalent to
dpkg-scansources(1).
If an override file is specified then a source override file will
be looked for with an extension of .src. The --source-override option can be
used to change the source override file that will be used.
contents
The contents command generates a contents file from a
directory tree. It takes the given directory and recursively searches it for
.deb files, and reads the file list from each file. It then sorts and writes
to stdout the list of files matched to packages. Directories are not written
to the output. If multiple packages own the same file then each package is
separated by a comma in the output.
The option --db can be used to specify a binary caching
DB.
release
The release command generates a Release file from a
directory tree. It recursively searches the given directory for uncompressed
and compressed Packages, Sources, Contents, Components and icons files as well
as Release, Index and md5sum.txt files by default
(APT::FTPArchive::Release::Default-Patterns). Additional filename patterns can
be added by listing them in APT::FTPArchive::Release::Patterns. It then writes
to stdout a Release file containing (by default) an MD5, SHA1, SHA256 and
SHA512 digest for each file.
Values for the additional metadata fields in the Release file are
taken from the corresponding variables under APT::FTPArchive::Release, e.g.
APT::FTPArchive::Release::Origin. The supported fields are Origin, Label,
Suite, Version, Codename, Date, NotAutomatic, ButAutomaticUpgrades,
Acquire-By-Hash, Valid-Until, Signed-By, Architectures, Components and
Description.
generate
The generate command is designed to be runnable from a
cron script and builds indexes according to the given config file. The config
language provides a flexible means of specifying which index files are built
from which directories, as well as providing a simple means of maintaining the
required settings.
clean
The clean command tidies the databases used by the given
configuration file by removing any records that are no longer necessary.
The generate command uses a configuration file to describe the
archives that are going to be generated. It follows the typical ISC
configuration format as seen in ISC tools like bind 8 and dhcpd.
apt.conf(5) contains a description of the syntax. Note that the
generate configuration is parsed in sectional manner, but apt.conf(5)
is parsed in a tree manner. This only effects how the scope tag is
handled.
The generate configuration has four separate sections, each
described below.
The Dir section defines the standard directories needed to locate
the files required during the generation process. These directories are
prepended certain relative paths defined in later sections to produce a
complete an absolute path.
ArchiveDir
Specifies the root of the FTP archive, in a standard
Debian configuration this is the directory that contains the ls-LR and dist
nodes.
OverrideDir
Specifies the location of the override files.
CacheDir
Specifies the location of the cache files.
FileListDir
Specifies the location of the file list files, if the
FileList setting is used below.
The Default section specifies default values, and settings that
control the operation of the generator. Other sections may override these
defaults with a per-section setting.
Packages::Compress
Sets the default compression schemes to use for the
package index files. It is a string that contains a space separated list of at
least one of the compressors configured via the APT::Compressor
configuration scope. The default for all compression schemes is '.
gzip'.
Packages::Extensions
Sets the default list of file extensions that are package
files. This defaults to '.deb'.
Sources::Compress
This is similar to Packages::Compress except that it
controls the compression for the Sources files.
Sources::Extensions
Sets the default list of file extensions that are source
files. This defaults to '.dsc'.
Contents::Compress
This is similar to Packages::Compress except that it
controls the compression for the Contents files.
Translation::Compress
This is similar to Packages::Compress except that it
controls the compression for the Translation-en master file.
DeLinkLimit
Specifies the number of kilobytes to delink (and replace
with hard links) per run. This is used in conjunction with the per-section
External-Links setting.
FileMode
Specifies the mode of all created index files. It
defaults to 0644. All index files are set to this mode with no regard to the
umask.
LongDescription
Specifies whether long descriptions should be included in
the Packages file or split out into a master Translation-en file.
Sets defaults specific to Tree sections. All of these variables
are substitution variables and have the strings $(DIST), $(SECTION) and
$(ARCH) replaced with their respective values.
MaxContentsChange
Sets the number of kilobytes of contents files that are
generated each day. The contents files are round-robined so that over several
days they will all be rebuilt.
ContentsAge
Controls the number of days a contents file is allowed to
be checked without changing. If this limit is passed the mtime of the contents
file is updated. This case can occur if the package file is changed in such a
way that does not result in a new contents file [override edit for instance].
A hold off is allowed in hopes that new .debs will be installed, requiring a
new file anyhow. The default is 10, the units are in days.
Directory
Sets the top of the .deb directory tree. Defaults to
$(DIST)/$(SECTION)/binary-$(ARCH)/
SrcDirectory
Sets the top of the source package directory tree.
Defaults to $(DIST)/$(SECTION)/source/
Packages
Sets the output Packages file. Defaults to
$(DIST)/$(SECTION)/binary-$(ARCH)/Packages
Sources
Sets the output Sources file. Defaults to
$(DIST)/$(SECTION)/source/Sources
Translation
Sets the output Translation-en master file with the long
descriptions if they should be not included in the Packages file. Defaults to
$(DIST)/$(SECTION)/i18n/Translation-en
InternalPrefix
Sets the path prefix that causes a symlink to be
considered an internal link instead of an external link. Defaults to
$(DIST)/$(SECTION)/
Contents
Sets the output Contents file. Defaults to
$(DIST)/$(SECTION)/Contents-$(ARCH). If this setting causes multiple Packages
files to map onto a single Contents file (as is the default) then
apt-ftparchive will integrate those package files together
automatically.
Contents::Header
Sets header file to prepend to the contents output.
BinCacheDB
Sets the binary cache database to use for this section.
Multiple sections can share the same database.
FileList
Specifies that instead of walking the directory tree,
apt-ftparchive should read the list of files from the given file.
Relative files names are prefixed with the archive directory.
SourceFileList
Specifies that instead of walking the directory tree,
apt-ftparchive should read the list of files from the given file.
Relative files names are prefixed with the archive directory. This is used
when processing source indexes.
The Tree section defines a standard Debian file tree which
consists of a base directory, then multiple sections in that base directory
and finally multiple Architectures in each section. The exact pathing used
is defined by the Directory substitution variable.
The Tree section takes a scope tag which sets the $(DIST) variable
and defines the root of the tree (the path is prefixed by ArchiveDir).
Typically this is a setting such as dists/bullseye.
All of the settings defined in the TreeDefault section can be used
in a Tree section as well as three new variables.
When processing a Tree section apt-ftparchive performs an
operation similar to:
for i in Sections do
for j in Architectures do
Generate for DIST=scope SECTION=i ARCH=j
Sections
This is a space separated list of sections which appear
under the distribution; typically this is something like main contrib
non-free
Architectures
This is a space separated list of all the architectures
that appear under search section. The special architecture 'source' is used to
indicate that this tree has a source archive. The architecture 'all' signals
that architecture specific files like Packages should not include information
about architecture all packages in all files as they will be available in a
dedicated file.
LongDescription
Specifies whether long descriptions should be included in
the Packages file or split out into a master Translation-en file.
BinOverride
Sets the binary override file. The override file contains
section, priority and maintainer address information.
SrcOverride
Sets the source override file. The override file contains
section information.
ExtraOverride
Sets the binary extra override file.
SrcExtraOverride
Sets the source extra override file.
The bindirectory section defines a binary directory tree with no
special structure. The scope tag specifies the location of the binary
directory and the settings are similar to the Tree section with no
substitution variables or SectionArchitecture settings.
Packages
Sets the Packages file output.
Sources
Sets the Sources file output. At least one of Packages or
Sources is required.
Contents
Sets the Contents file output (optional).
BinOverride
Sets the binary override file.
SrcOverride
Sets the source override file.
ExtraOverride
Sets the binary extra override file.
SrcExtraOverride
Sets the source extra override file.
BinCacheDB
Sets the cache DB.
PathPrefix
Appends a path to all the output paths.
FileList, SourceFileList
Specifies the file list file.
The binary override file is fully compatible with
dpkg-scanpackages(1). It contains four fields separated by spaces.
The first field is the package name, the second is the priority to force
that package to, the third is the section to force that package to and the
final field is the maintainer permutation field.
The general form of the maintainer field is:
or simply,
The first form allows a double-slash separated list of old email
addresses to be specified. If any of those are found then new is substituted
for the maintainer field. The second form unconditionally substitutes the
maintainer field.
The source override file is fully compatible with
dpkg-scansources(1). It contains two fields separated by spaces. The
first field is the source package name, the second is the section to assign
it.
The extra override file allows any arbitrary tag to be added or
replaced in the output. It has three columns, the first is the package, the
second is the tag and the remainder of the line is the new value.
All command line options may be set using the configuration file,
the descriptions indicate the configuration option to set. For boolean
options you can override the config file by using something like
-f-,--no-f, -f=no or several other variations.
--md5, --sha1, --sha256, --sha512
Generate the given checksum. These options default to on,
when turned off the generated index files will not have the checksum fields
where possible. Configuration Items: APT::FTPArchive::Checksum and
APT::FTPArchive::Index::Checksum where Index can be
Packages, Sources or Release and Checksum can be MD5, SHA1, SHA256 or
SHA512.
-d, --db
Use a binary caching DB. This has no effect on the
generate command. Configuration Item: APT::FTPArchive::DB.
-q, --quiet
Quiet; produces output suitable for logging, omitting
progress indicators. More q's will produce more quiet up to a maximum of 2.
You can also use -q=# to set the quiet level, overriding the
configuration file. Configuration Item: quiet.
--delink
Perform Delinking. If the External-Links setting is used
then this option actually enables delinking of the files. It defaults to on
and can be turned off with --no-delink. Configuration Item:
APT::FTPArchive::DeLinkAct.
--contents
Perform contents generation. When this option is set and
package indexes are being generated with a cache DB then the file listing will
also be extracted and stored in the DB for later use. When using the generate
command this option also allows the creation of any Contents files. The
default is on. Configuration Item: APT::FTPArchive::Contents.
-s, --source-override
Select the source override file to use with the sources
command. Configuration Item: APT::FTPArchive::SourceOverride.
--readonly
Make the caching databases read only. Configuration Item:
APT::FTPArchive::ReadOnlyDB.
-a, --arch
Accept in the packages and contents commands only package
files matching *_arch.deb or *_all.deb instead of all package files in the
given path. Configuration Item: APT::FTPArchive::Architecture.
APT::FTPArchive::AlwaysStat
apt-ftparchive(1) caches as much as possible of
metadata in a cachedb. If packages are recompiled and/or republished with the
same version again, this will lead to problems as the now outdated cached
metadata like size and checksums will be used. With this option enabled this
will no longer happen as it will be checked if the file was changed. Note that
this option is set to "false" by default as it is not recommend to
upload multiple versions/builds of a package with the same version number, so
in theory nobody will have these problems and therefore all these extra checks
are useless.
APT::FTPArchive::LongDescription
This configuration option defaults to "true"
and should only be set to "false" if the Archive generated with
apt-ftparchive(1) also provides Translation files. Note that the
Translation-en master file can only be created in the generate command.
-h, --help
Show a short usage summary.
-v, --version
Show the program version.
-c, --config-file
Configuration File; Specify a configuration file to use.
The program will read the default configuration file and then this
configuration file. If configuration settings need to be set before the
default configuration files are parsed specify a file with the
APT_CONFIG environment variable. See
apt.conf(5) for syntax
information.
-o, --option
Set a Configuration Option; This will set an arbitrary
configuration option. The syntax is -o Foo::Bar=bar. -o and
--option can be used multiple times to set different options.
To create a compressed Packages file for a directory containing
binary packages (.deb):
apt-ftparchive packages directory | gzip > Packages.gz
apt-ftparchive returns zero on normal operation, decimal
100 on error.
APT bug page[1]. If you wish to report a bug in APT, please
see /usr/share/doc/debian/bug-reporting.txt or the reportbug(1)
command.
- 1.
- APT bug page
http://bugs.debian.org/src:apt