DOKK / manpages / debian 11 / argyll / colprof.1.en
CREATE(1) User Commands CREATE(1)

Create - Create ICC profile.

Create ICC profile

colprof [-options] inoutfile

Verbose mode

-A manufacturer Manufacturer description string

Model description string
Profile Description string (Default "inoutfile")
Copyright string
Attributes: Transparency, Matte, Negative, BlackAndWhite
Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric
Quality - Low, Medium (def), High, Ultra
Low quality B2A table - or specific B2A quality or none for input device
Don't create input (Device) shaper curves
Don't create input (Device) grid position curves
Don't create output (PCS) shaper curves
Don't put the input .ti3 data in the profile
Black value target: z = zero K, h = 0.5 K, x = max K, r = ramp K (def.)

-k p stle stpo enpo enle shape

stle: K level at White 0.0 - 1.0 stpo: start point of transition Wh 0.0 - Bk 1.0 enpo: End point of transition Wh 0.0 - Bk 1.0 enle: K level at Black 0.0 - 1.0 shape: 1.0 = straight, 0.0-1.0 concave, 1.0-2.0 convex
Same as -k, but target is K locus rather than K value itself
override total ink limit, 0 - 400% (default from .ti3)
override black ink limit, 0 - 100% (default from .ti3)
Algorithm type override l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix g = gamma+matrix, s = shaper+matrix, m = matrix only, G = single gamma+matrix, S = single shaper+matrix
If input profile, auto scale WP to allow extrapolation
If input profile, clip cLUT values above WP
If input profile, scale media white point by scale
Restrict white <= 1.0, black and primaries to be +ve
Degree of dark region cLUT grid emphasis 1.0-4.0 (default 1.00 = none)
Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
Choose illuminant for computation of CIE XYZ from spectral data & FWA:
A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
Choose CIE Observer for spectral data:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
Average deviation of device+instrument readings as a percentage (default 0.50%)
Apply gamut mapping to output profile perceptual B2A table for given source space
Apply gamut mapping to output profile perceptual and saturation B2A table
Use colormetric source gamut to make output profile perceptual table
Use colormetric source gamut to make output profile saturation table
Use source image gamut as well for output profile gamut mapping
Incorporate abstract profile(s) into output tables
Override gamut mapping intent for output profile perceptual table:
Override gamut mapping intent for output profile saturation table:
a - Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw - Absolute Colorimetric (in Jab) with scaling to fit white point aa - Absolute Appearance
r - White Point Matched Appearance [ICC Relative Colorimetric]
la - Luminance axis matched Appearance
p - Perceptual (Preferred) (Default) [ICC Perceptual]
pa - Perceptual Apperance ms - Saturation
s - Enhanced Saturation [ICC Saturation]
al - Absolute Colorimetric (Lab) rl - White Point Matched Colorimetric (Lab)
set input viewing conditions for output profile CIECAM02 gamut mapping,
either an enumerated choice, or a parameter
set output viewing conditions for output profile CIECAM02 gamut mapping
either an enumerated choice, or a parameter Also sets out of gamut clipping CAM space. either an enumerated choice, or a series of parameters:value changes
pp - Practical Reflection Print (ISO-3664 P2) pe - Print evaluation environment (CIE 116-1995) pc - Critical print evaluation environment (ISO-3664 P1) mt - Monitor in typical work environment mb - Bright monitor in bright work environment md - Monitor in darkened work environment jm - Projector in dim environment jd - Projector in dark environment tv - Television/Film Studio
pcd - Photo CD - original scene outdoors
ob - Original scene - Bright Outdoors cx - Cut Sheet Transparencies on a viewing box
Create gamut gammap_p.wrl and gammap_s.wrl diagostics
Override the default output filename.
Base name for input.ti3/output.icc file
September 2014 colprof