barman - Backup and Recovery Manager for PostgreSQL
Barman is an administration tool for disaster recovery of
PostgreSQL servers written in Python and maintained by 2ndQuadrant. Barman
can perform remote backups of multiple servers in business critical
environments and helps DBAs during the recovery phase.
The system-level Barman configuration file is located at
-
/etc/barman.conf
or
-
/etc/barman/barman.conf
and is overridden on a per-user level by
-
$HOME/.barman.conf
The Barman configuration file is a plain INI file. There is a
general section called [barman] and a section [servername] for each server
you want to backup. Rows starting with ; are comments.
Barman supports the inclusion of multiple configuration files,
through the configuration_files_directory option. Included files must
contain only server specifications, not global configurations. If the value
of configuration_files_directory is a directory, Barman reads all files with
.conf extension that exist in that folder. For example, if you set it to
/etc/barman.d, you can specify your PostgreSQL servers placing each section
in a separate .conf file inside the /etc/barman.d folder.
- active
- When set to true (default), the server is in full operational state. When
set to false, the server can be used for diagnostics, but any operational
command such as backup execution or WAL archiving is temporarily disabled.
Setting active=false is a good practice when adding a new node to Barman.
Server.
- archiver
- This option allows you to activate log file shipping through PostgreSQL's
archive_command for a server. If set to true (default), Barman expects
that continuous archiving for a server is in place and will activate
checks as well as management (including compression) of WAL files that
Postgres deposits in the incoming directory. Setting it to false,
will disable standard continuous archiving for a server.
Global/Server.
- archiver_batch_size
- This option allows you to activate batch processing of WAL files for the
archiver process, by setting it to a value > 0. Otherwise, the
traditional unlimited processing of the WAL queue is enabled. When batch
processing is activated, the archive-wal process would limit itself to
maximum archiver_batch_size WAL segments per single run. Integer.
Global/Server.
- backup_directory
- Directory where backup data for a server will be placed. Server.
- backup_method
- Configure the method barman used for backup execution. If set to rsync
(default), barman will execute backup using the rsync command over SSH
(requires ssh_command). If set to postgres barman will use the
pg_basebackup command to execute the backup. If set to local-rsync, barman
will assume to be running on the same server as the the PostgreSQL
instance and with the same user, then execute rsync for the file system
copy. Global/Server.
- backup_options
- This option allows you to control the way Barman interacts with PostgreSQL
for backups. It is a comma-separated list of values that accepts the
following options:
- •
- exclusive_backup (default when backup_method = rsync): barman backup
executes backup operations using the standard exclusive backup approach
(technically through pg_start_backup and pg_stop_backup)
- •
- concurrent_backup (default when backup_method = postgres): if using
PostgreSQL 9.2, 9.3, 9.4, and 9.5, Barman requires the pgespresso module
to be installed on the PostgreSQL server and can be used to perform a
backup from a standby server. Starting from PostgreSQL 9.6, Barman uses
the new PostgreSQL API to perform backups from a standby server.
- •
- external_configuration: if present, any warning regarding external
configuration files is suppressed during the execution of a backup.
Note that exclusive_backup and concurrent_backup are mutually
exclusive. Global/Server.
- bandwidth_limit
- This option allows you to specify a maximum transfer rate in kilobytes per
second. A value of zero specifies no limit (default). Global/Server.
- barman_home
- Main data directory for Barman. Global.
- barman_lock_directory
- Directory for locks. Default: %(barman_home)s. Global.
- basebackup_retry_sleep
- Number of seconds of wait after a failed copy, before retrying Used during
both backup and recovery operations. Positive integer, default 30.
Global/Server.
- basebackup_retry_times
- Number of retries of base backup copy, after an error. Used during both
backup and recovery operations. Positive integer, default 0.
Global/Server.
- basebackups_directory
- Directory where base backups will be placed. Server.
- check_timeout
- Maximum execution time, in seconds per server, for a barman check command.
Set to 0 to disable the timeout. Positive integer, default 30.
Global/Server.
- compression
- Standard compression algorithm applied to WAL files. Possible values are:
gzip (requires gzip to be installed on the system), bzip2 (requires
bzip2), pigz (requires pigz), pygzip (Python's internal gzip compressor)
and pybzip2 (Python's internal bzip2 compressor). Global/Server.
- conninfo
- Connection string used by Barman to connect to the Postgres server. This
is a libpq connection string, consult the PostgreSQL manual
(https://www.postgresql.org/docs/current/static/libpq-connect.html#LIBPQ-CONNSTRING)
for more information. Commonly used keys are: host, hostaddr, port,
dbname, user, password. Server.
- create_slot
- When set to auto and slot_name is defined, Barman automatically attempts
to create the replication slot if not present. When set to manual
(default), the replication slot needs to be manually created.
Global/Server.
- custom_compression_filter
- Customised compression algorithm applied to WAL files. Global/Server.
- custom_decompression_filter
- Customised decompression algorithm applied to compressed WAL files; this
must match the compression algorithm. Global/Server.
- description
- A human readable description of a server. Server.
- errors_directory
- Directory that contains WAL files that contain an error; usually this is
related to a conflict with an existing WAL file (e.g. a WAL file that has
been archived after a streamed one).
- immediate_checkpoint
- This option allows you to control the way PostgreSQL handles checkpoint at
the start of the backup. If set to false (default), the I/O workload for
the checkpoint will be limited, according to the
checkpoint_completion_target setting on the PostgreSQL server. If set to
true, an immediate checkpoint will be requested, meaning that PostgreSQL
will complete the checkpoint as soon as possible. Global/Server.
- incoming_wals_directory
- Directory where incoming WAL files are archived into. Requires archiver to
be enabled. Server.
- last_backup_maximum_age
- This option identifies a time frame that must contain the latest backup.
If the latest backup is older than the time frame, barman check command
will report an error to the user. If empty (default), latest backup is
always considered valid. Syntax for this option is: "i (DAYS | WEEKS
| MONTHS)" where i is a integer greater than zero, representing the
number of days | weeks | months of the time frame. Global/Server.
- log_file
- Location of Barman's log file. Global.
- log_level
- Level of logging (DEBUG, INFO, WARNING, ERROR, CRITICAL). Global.
- max_incoming_wals_queue
- Maximum number of WAL files in the incoming queue (in both streaming and
archiving pools) that are allowed before barman check returns an error
(that does not block backups). Global/Server. Default: None
(disabled).
- minimum_redundancy
- Minimum number of backups to be retained. Default 0. Global/Server.
- network_compression
- This option allows you to enable data compression for network transfers.
If set to false (default), no compression is used. If set to true,
compression is enabled, reducing network usage. Global/Server.
- parallel_jobs
- This option controls how many parallel workers will copy files during a
backup or recovery command. Default 1. Global/Server. For backup purposes,
it works only when backup_method is rsync.
- path_prefix
- One or more absolute paths, separated by colon, where Barman looks for
executable files. The paths specified in path_prefix are tried before the
ones specified in PATH environment variable. Global/server.
- post_archive_retry_script
- Hook script launched after a WAL file is archived by maintenance. Being
this a retry hook script, Barman will retry the execution of the
script until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or
an ABORT_STOP (63) code. In a post archive scenario, ABORT_STOP has
currently the same effects as ABORT_CONTINUE. Global/Server.
- post_archive_script
- Hook script launched after a WAL file is archived by maintenance, after
'post_archive_retry_script'. Global/Server.
- post_backup_retry_script
- Hook script launched after a base backup. Being this a retry hook
script, Barman will retry the execution of the script until this either
returns a SUCCESS (0), an ABORT_CONTINUE (62) or an ABORT_STOP (63) code.
In a post backup scenario, ABORT_STOP has currently the same effects as
ABORT_CONTINUE. Global/Server.
- post_backup_script
- Hook script launched after a base backup, after
'post_backup_retry_script'. Global/Server.
- post_delete_retry_script
- Hook script launched after the deletion of a backup. Being this a
retry hook script, Barman will retry the execution of the script
until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or an
ABORT_STOP (63) code. In a post delete scenario, ABORT_STOP has currently
the same effects as ABORT_CONTINUE. Global/Server.
- post_delete_script
- Hook script launched after the deletion of a backup, after
'post_delete_retry_script'. Global/Server.
- post_recovery_retry_script
- Hook script launched after a recovery. Being this a retry hook
script, Barman will retry the execution of the script until this either
returns a SUCCESS (0), an ABORT_CONTINUE (62) or an ABORT_STOP (63) code.
In a post recovery scenario, ABORT_STOP has currently the same effects as
ABORT_CONTINUE. Global/Server.
- post_recovery_script
- Hook script launched after a recovery, after 'post_recovery_retry_script'.
Global/Server.
- post_wal_delete_retry_script
- Hook script launched after the deletion of a WAL file. Being this a
retry hook script, Barman will retry the execution of the script
until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or an
ABORT_STOP (63) code. In a post delete scenario, ABORT_STOP has currently
the same effects as ABORT_CONTINUE. Global/Server.
- post_wal_delete_script
- Hook script launched after the deletion of a WAL file, after
'post_wal)delete_retry_script'. Global/Server.
- pre_archive_retry_script
- Hook script launched before a WAL file is archived by maintenance, after
'pre_archive_script'. Being this a retry hook script, Barman will
retry the execution of the script until this either returns a SUCCESS (0),
an ABORT_CONTINUE (62) or an ABORT_STOP (63) code. Returning ABORT_STOP
will propagate the failure at a higher level and interrupt the WAL
archiving operation. Global/Server.
- pre_archive_script
- Hook script launched before a WAL file is archived by maintenance.
Global/Server.
- pre_backup_retry_script
- Hook script launched before a base backup, after 'pre_backup_script'.
Being this a retry hook script, Barman will retry the execution of
the script until this either returns a SUCCESS (0), an ABORT_CONTINUE (62)
or an ABORT_STOP (63) code. Returning ABORT_STOP will propagate the
failure at a higher level and interrupt the backup operation.
Global/Server.
- pre_backup_script
- Hook script launched before a base backup. Global/Server.
- pre_delete_retry_script
- Hook script launched before the deletion of a backup, after
'pre_delete_script'. Being this a retry hook script, Barman will
retry the execution of the script until this either returns a SUCCESS (0),
an ABORT_CONTINUE (62) or an ABORT_STOP (63) code. Returning ABORT_STOP
will propagate the failure at a higher level and interrupt the backup
deletion. Global/Server.
- pre_delete_script
- Hook script launched before the deletion of a backup. Global/Server.
- pre_recovery_retry_script
- Hook script launched before a recovery, after 'pre_recovery_script'. Being
this a retry hook script, Barman will retry the execution of the
script until this either returns a SUCCESS (0), an ABORT_CONTINUE (62) or
an ABORT_STOP (63) code. Returning ABORT_STOP will propagate the failure
at a higher level and interrupt the recover operation. Global/Server.
- pre_recovery_script
- Hook script launched before a recovery. Global/Server.
- pre_wal_delete_retry_script
- Hook script launched before the deletion of a WAL file, after
'pre_wal_delete_script'. Being this a retry hook script, Barman
will retry the execution of the script until this either returns a SUCCESS
(0), an ABORT_CONTINUE (62) or an ABORT_STOP (63) code. Returning
ABORT_STOP will propagate the failure at a higher level and interrupt the
WAL file deletion. Global/Server.
- pre_wal_delete_script
- Hook script launched before the deletion of a WAL file.
Global/Server.
- primary_ssh_command
- Parameter that identifies a Barman server as passive. In a passive node,
the source of a backup server is a Barman installation rather than a
PostgreSQL server. If primary_ssh_command is specified, Barman uses it to
establish a connection with the primary server. Empty by default, it can
also be set globally.
- recovery_options
- Options for recovery operations. Currently only supports get-wal. get-wal
activates generation of a basic restore_command in the resulting recovery
configuration that uses the barman get-wal command to fetch WAL files
directly from Barman's archive of WALs. Comma separated list of values,
default empty. Global/Server.
- retention_policy
- Policy for retention of periodic backups and archive logs. If left empty,
retention policies are not enforced. For redundancy based retention policy
use "REDUNDANCY i" (where i is an integer > 0 and defines the
number of backups to retain). For recovery window retention policy use
"RECOVERY WINDOW OF i DAYS" or "RECOVERY WINDOW OF i
WEEKS" or "RECOVERY WINDOW OF i MONTHS" where i is a
positive integer representing, specifically, the number of days, weeks or
months to retain your backups. For more detailed information, refer to the
official documentation. Default value is empty. Global/Server.
- retention_policy_mode
- Currently only "auto" is implemented. Global/Server.
- reuse_backup
- This option controls incremental backup support. Global/Server. Possible
values are:
- •
- off: disabled (default);
- •
- copy: reuse the last available backup for a server and create a copy of
the unchanged files (reduce backup time);
- •
- link: reuse the last available backup for a server and create a hard link
of the unchanged files (reduce backup time and space). Requires operating
system and file system support for hard links.
- slot_name
- Physical replication slot to be used by the receive-wal command when
streaming_archiver is set to on. Requires PostgreSQL >= 9.4.
Global/Server. Default: None (disabled).
- ssh_command
- Command used by Barman to login to the Postgres server via ssh.
Server.
- streaming_archiver
- This option allows you to use the PostgreSQL's streaming protocol to
receive transaction logs from a server. If set to on, Barman expects to
find pg_receivewal (known as pg_receivexlog prior to PostgreSQL 10) in the
PATH (see path_prefix option) and that streaming connection for the server
is working. This activates connection checks as well as management
(including compression) of WAL files. If set to off (default) barman will
rely only on continuous archiving for a server WAL archive operations,
eventually terminating any running pg_receivexlog for the server.
Global/Server.
- streaming_archiver_batch_size
- This option allows you to activate batch processing of WAL files for the
streaming_archiver process, by setting it to a value > 0. Otherwise,
the traditional unlimited processing of the WAL queue is enabled. When
batch processing is activated, the archive-wal process would limit itself
to maximum streaming_archiver_batch_size WAL segments per single run.
Integer. Global/Server.
- streaming_archiver_name
- Identifier to be used as application_name by the receive-wal command. Only
available with pg_receivewal (or pg_receivexlog >= 9.3). By default it
is set to barman_receive_wal. Global/Server.
- streaming_backup_name
- Identifier to be used as application_name by the pg_basebackup command.
Only available with pg_basebackup >= 9.3. By default it is set to
barman_streaming_backup. Global/Server.
- streaming_conninfo
- Connection string used by Barman to connect to the Postgres server via
streaming replication protocol. By default it is set to conninfo.
Server.
- streaming_wals_directory
- Directory where WAL files are streamed from the PostgreSQL server to
Barman. Requires streaming_archiver to be enabled. Server.
- tablespace_bandwidth_limit
- This option allows you to specify a maximum transfer rate in kilobytes per
second, by specifying a comma separated list of tablespaces (pairs
TBNAME:BWLIMIT). A value of zero specifies no limit (default).
Global/Server.
- wal_retention_policy
- Policy for retention of archive logs (WAL files). Currently only
"MAIN" is available. Global/Server.
- wals_directory
- Directory which contains WAL files. Server.
Here is an example of configuration file:
-
[barman]
; Main directory
barman_home = /var/lib/barman
; System user
barman_user = barman
; Log location
log_file = /var/log/barman/barman.log
; Default compression level
;compression = gzip
; Incremental backup
reuse_backup = link
; 'main' PostgreSQL Server configuration
[main]
; Human readable description
description = "Main PostgreSQL Database"
; SSH options
ssh_command = ssh postgres@pg
; PostgreSQL connection string
conninfo = host=pg user=postgres
; PostgreSQL streaming connection string
streaming_conninfo = host=pg user=postgres
; Minimum number of required backups (redundancy)
minimum_redundancy = 1
; Retention policy (based on redundancy)
retention_policy = REDUNDANCY 2
In alphabetical order:
- •
- Gabriele Bartolini <gabriele.bartolini@2ndquadrant.it>
(architect)
- •
- Jonathan Battiato <jonathan.battiato@2ndquadrant.it>
(QA/testing)
- •
- Giulio Calacoci <giulio.calacoci@2ndquadrant.it> (developer)
- •
- Francesco Canovai <francesco.canovai@2ndquadrant.it>
(QA/testing)
- •
- Leonardo Cecchi <leonardo.cecchi@2ndquadrant.it> (developer)
- •
- Gianni Ciolli <gianni.ciolli@2ndquadrant.it> (QA/testing)
- •
- Britt Cole <britt.cole@2ndquadrant.com> (documentation)
- •
- Marco Nenciarini <marco.nenciarini@2ndquadrant.it> (project
leader)
- •
- Rubens Souza <rubens.souza@2ndquadrant.it> (QA/testing)
Past contributors:
- •
- Carlo Ascani
- •
- Stefano Bianucci
- •
- Giuseppe Broccolo
- •
- Homepage: <http://www.pgbarman.org/>
- •
- Documentation: <http://docs.pgbarman.org/>
- •
- Professional support: <https://www.2ndQuadrant.com/>
Barman is the property of 2ndQuadrant Limited and its code is
distributed under GNU General Public License v3.
Copyright (C) 2011-2020 2ndQuadrant Limited -
https://www.2ndQuadrant.com/.
2ndQuadrant Limited <https://www.2ndQuadrant.com>.