DOKK / manpages / debian 11 / can-utils / slcand.1.en
SLCAND(1) User Commands SLCAND(1)

slcand - manual page for slcand 2020.11.0-1

slcand [options] <tty> [canif-name]

./slcand - userspace daemon for serial line CAN interface driver SLCAN.

(send open command 'O\r')
(send close command 'C\r')
(read status flags with 'F\r' to reset error states)
(send listen only command 'L\r', overrides -o)
(set CAN speed 0..8)
(set UART speed in baud)
(set UART flow control type 'hw' or 'sw')
(set bit time register value)
(stay in foreground; no daemonize)
(show this help page)

slcand -o -c -f -s6 ttyUSB0

slcand -o -c -f -s6 ttyUSB0 can0

slcand -o -c -f -s6 /dev/ttyUSB0

December 2020 slcand 2020.11.0-1