xsh_respon_slit_nod - Reduce STD star frames in SLIT configuration
and nod mode
esorex xsh_respon_slit_nod [OPTIONS] FILE.sof
This recipe reduces science exposure in SLIT configuration and NOD
mode Input Frames :
- A set of n Science frames ( n even ), Tag = OBJECT_SLIT_NOD_arm
- Spectral format table (Tag = SPECTRAL_FORMAT_TAB_arm)
- [UVB,VIS] A master bias frame (Tag = MASTER_BIAS_arm)
- A master flat frame (Tag = MASTER_FLAT_SLIT_arm)
- An order table frame(Tag = ORDER_TABLE_EDGES_SLIT_arm)
- [poly mode] A wave solution frame(Tag = WAVE_TAB_2D_arm)
- [poly mode] A wave map frame(Tag = WAVE_MAP_arm)
- [poly mode] A disp table frame(Tag = DISP_TAB_arm)
- [physical model mode]A model cfg table (Format = TABLE, Tag =
XSH_MOD_CFG_TAB_arm)
- [OPTIONAL] A telluric model catalog (Tag = TELL_MOD_CAT_arm arm=VIS,NIR)
- A standard star fluxes catalog (Tag = FLUX_STD_CATALOG_arm Type = FLX)
- A table to set response sampling points (Tag = RESP_FIT_POINTS_CAT_arm)
- [OPTIONAL] An atmospheric extinction table (Tag = ATMOS_EXT_arm)
if provided this is the one used to flux calibrate the spectra Products :
- [If STD is in catal] The response function (Tag =
PREFIX_RESPONSE_ORDER1D_SLIT_arm)
- [If STD is in catal] The response function (Tag =
PREFIX_RESPONSE_MERGE1D_SLIT_arm)
- PREFIX_ORDER2D_arm (2 dimension)
- PREFIX_ORDER1D_arm (1 dimension)
- PREFIX_MERGE2D_arm (2 dimension)
- PREFIX_MERGE1D_arm (1 dimension)
- PREFIX_WAVE_MAP_arm, wave map image
- PREFIX_SLIT_MAP_arm, slit map image
- [If STD is in catal] Flux calibrated order-by-order 2D spectrum (Tag =
PREFIX_FLUX_ORDER2D_arm)
- [If STD is in catal] Flux calibrated order-by-order 1D spectrum (Tag =
PREFIX_FLUX_ORDER1D_arm)
- [If STD is in catal] Flux calibrated merged 2D spectrum (Tag =
PREFIX_FLUX_MERGE2D_arm)
- [If STD is in catal] Flux calibrated merged 1D spectrum (Tag =
PREFIX_FLUX_MERGE1D_arm)
- [If STD is in catal] The efficiency (Tag = EFFICIENCY_SLIT_arm)
- where PREFIX is SCI, FLUX, TELL if input raw DPR.TYPE contains OBJECT or
FLUX or TELLURIC
- --keep-temp
<str>
- If ´no´, temporary files are deleted. (str; default:
´no´). The full name of this option for the EsoRex
configuration file is xsh.xsh_respon_slit_nod.keep-temp [default =
no].
- --debug-level
<str>
- Additional xshooter debug level. One of ´none´,
´low´, ´medium´, ´high´ (str;
default: ´none´). The full name of this option for the
EsoRex configuration file is xsh.xsh_respon_slit_nod.debug-level
[default = none].
- --time-stamp
<bool>
- Add timestamp to product file name. (bool; default: False). The full name
of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.time-stamp [default = False].
- --decode-bp
<int>
- Integer representation of the bits to be considered bad when decoding the
bad pixel mask pixel values. Most frequent codes relevant for the user: 0:
good pixel, 8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray
unremoved, 128: calibration file defect, 256: hot pixel, 512: dark pixel,
4096: A/D converted saturation, 32768: non linear pixel, 1048576:
extrapolated flux in NIR, 4194304: Interpolated flux during extraction.
(int; default: 1875902463). The full name of this option for the EsoRex
configuration file is xsh.xsh_respon_slit_nod.decode-bp [default =
1875902463].
- --pre-overscan-corr
<int>
- pre-overscan correction. 0: no correction 1: mean overscan correction 2:
mean prescan correction 3: (mean pre+mean overscan)/2 correction (int;
default: 1). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.pre-overscan-corr [default =
1].
- --stack-method
<str>
- Method used to build master frame. (str; default: ´median´).
The full name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.stack-method [default =
median].
- --klow
<float>
- Kappa used to clip low level values, when method is set to
´mean´ (float; default: 5.0). The full name of this option
for the EsoRex configuration file is xsh.xsh_respon_slit_nod.klow
[default = 5.0].
- --khigh
<float>
- Kappa used to clip high level values, when method is set to
´mean´ (float; default: 5.0). The full name of this option
for the EsoRex configuration file is xsh.xsh_respon_slit_nod.khigh
[default = 5.0].
- --removecrhsingle-sigmalim
<float>
- Poisson fluctuation threshold to flag CRHs (see van Dokkum,
PASP,113,2001,p1420-27) (float; default: 20.0). The full name of this
option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.removecrhsingle-sigmalim [default =
20.0].
- --removecrhsingle-flim
<float>
- Minimum contrast between the Laplacian image and the fine structure image
that a point must have to be flagged as CRH. (see van Dokkum,
PASP,113,2001,p1420-27) (float; default: 2.0). The full name of this
option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.removecrhsingle-flim [default =
2.0].
- --removecrhsingle-niter
<int>
- Max number of iterations (int; default: 4). The full name of this option
for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.removecrhsingle-niter [default =
4].
- --rectify-kernel
<str>
- Name of the Interpolation Kernel Used. Possible values are: tanh, sinc,
sinc2, lanczos, hamming, hann. (str; default: ´tanh´). The
full name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.rectify-kernel [default =
tanh].
- --rectify-radius
<float>
- Rectify Interpolation radius [bin units]. (float; default: 2.0). The full
name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.rectify-radius [default = 2.0].
- --rectify-bin-lambda
<float>
- Wavelength step in the output spectrum [nm] (float; default: -1.0). The
full name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.rectify-bin-lambda [default =
-1.0].
- --rectify-bin-slit
<float>
- Spatial step along the slit in the output spectrum [arcsec] (float;
default: -1.0). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.rectify-bin-slit [default =
-1.0].
- --rectify-fast
<bool>
- Fast if TRUE (Rect[B-A] = -Rect[A-B]), in that case only entire pixel
shifts are applied. (bool; default: True). The full name of this option
for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.rectify-fast [default = True].
- --localize-method
<str>
- Localization method (MANUAL, MAXIMUM, GAUSSIAN) used to detect the object
centroid and height on the slit (str; default: ´MANUAL´).
The full name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.localize-method [default =
MANUAL].
- --localize-chunk-nb
<int>
- Number of chunks in the full spectrum to localize the object (int;
default: 10). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.localize-chunk-nb [default =
10].
- --localize-thresh
<float>
- Threshold relative to the peak intensity below which the edges of the
object are detected for MAXIMUM localization (float; default: 0.1). The
full name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.localize-thresh [default =
0.1].
- --localize-deg-lambda
<int>
- Degree in lambda in the localization polynomial expression slit=f(lambda),
used only for MAXIMUM and GAUSSIAN (int; default: 0). The full name of
this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.localize-deg-lambda [default =
0].
- --localize-slit-position
<float>
- Object position on the slit for MANUAL localization [arcsec] (float;
default: 0.0). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.localize-slit-position [default =
0.0].
- --localize-slit-hheight
<float>
- Object half height on the slit for MANUAL localization [arcsec] (float;
default: 2.0). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.localize-slit-hheight [default =
2.0].
- --localize-kappa
<float>
- Kappa value for sigma clipping in the localization polynomial fit (float;
default: 3.0). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.localize-kappa [default =
3.0].
- --localize-niter
<int>
- Number of iterations for sigma clipping in the localization polynomial fit
(int; default: 3). The full name of this option for the EsoRex
configuration file is xsh.xsh_respon_slit_nod.localize-niter
[default = 3].
- --localize-use-skymask
<bool>
- TRUE if we want to mask sky lines using SKY_LINE_LIST file. (bool;
default: False). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.localize-use-skymask [default =
False].
- --localize-nod-throw
<float>
- Step (arcsec) between A and B images in nodding mode. (float; default:
0.0). The full name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.localize-nod-throw [default =
0.0].
- Method used for extraction (LOCALIZATION, NOD) (str; default:
´NOD´). The full name of this option for the EsoRex
configuration file is xsh.xsh_respon_slit_nod.extract-method
[default = NOD].
- Half size of mask used to define object cross order profile (int; default:
30). The full name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.stdextract-interp-hsize [default =
30].
- --combinenod-throwlist
<str>
- Name of ascii file containing the list of throw shifts with respect to the
first exposure (str; default: ´throwlist.asc´). The full
name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.combinenod-throwlist [default =
throwlist.asc].
- --combinenod-method
<str>
- Combination method for nodded frames (MEDIAN, MEAN) (str; default:
´MEAN´). The full name of this option for the EsoRex
configuration file is xsh.xsh_respon_slit_nod.combinenod-method
[default = MEAN].
- --max-slit
<float>
- Lower Slit Limit (localize and extract (float; default: 5.7). The full
name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.max-slit [default = 5.7].
- --min-slit
<float>
- Upper Slit Limit (localize and extract (float; default: -5.3). The full
name of this option for the EsoRex configuration file is
xsh.xsh_respon_slit_nod.min-slit [default = -5.3].
- --correct-tellurics
<bool>
- TRUE if during response computation we apply telluric correction (bool;
default: True). The full name of this option for the EsoRex configuration
file is xsh.xsh_respon_slit_nod.correct-tellurics [default =
True].
- --correct-sky-by-median
<bool>
- TRUE if the resampled spectrum at each wavelength is median subtracted to
remove sky lines (bool; default: True). The full name of this option for
the EsoRex configuration file is
xsh.xsh_respon_slit_nod.correct-sky-by-median [default =
True].
- --scale-combine-nod-method
<int>
- frame scaling when nod frames are combined: 0 (no-scaling); 1 (scaling)
(int; default: 1). The full name of this option for the EsoRex
configuration file is
xsh.xsh_respon_slit_nod.scale-combine-nod-method [default =
1].
Note that it is possible to create a configuration file containing
these options, along with suitable default values. Please refer to the
details provided by the 'esorex --help' command.
The full documentation for the xshoo pipeline can be downloaded as
a PDF file using the following URL:
- ftp://ftp.eso.org/pub/dfs/pipelines/xshoo/xshoo-pipeline-manual-12.1.pdf
An overview over the existing ESO pipelines can be found on the
web page https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the
esorex (1) man page.
It is possible to call the pipelines from python using the
python-cpl package. See
https://packages.python.org/python-cpl/index.html for further
information.
The other recipes of the xshoo pipeline are xsh_2dmap(7),
xsh_cfg_recover(7), xsh_flexcomp(7), xsh_geom_ifu(7),
xsh_lingain(7), xsh_mbias(7), xsh_mdark(7),
xsh_mflat(7), xsh_orderpos(7), xsh_predict(7),
xsh_respon_slit_offset(7), xsh_respon_slit_stare(7),
xsh_scired_ifu_offset(7), xsh_scired_ifu_offset_drl(7),
xsh_scired_ifu_stare(7), xsh_scired_ifu_stare_drl(7),
xsh_scired_slit_nod(7), xsh_scired_slit_offset(7),
xsh_scired_slit_stare(7), xsh_util_physmod(7),
xsh_wavecal(7)
xsh_respon_slit_nod 3.5.0
P.Goldoni, L.Guglielmi, R. Haigron, F. Royer, D. Bramich A.
Modigliani <amodigli@eso.org>
Please report any problems to amodigli@eso.org. Alternatively, you
may send a report to the ESO User Support Department
<usd-help@eso.org>.
This file is part of the X-shooter Instrument Pipeline Copyright
(C) 2006 European Southern Observatory
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA