fai-cd - make a bootable CD-ROM or USB stick that performs an
FAI
fai-cd [OPTION] -m MIRROR ISOFILE
fai-cd [OPTION] -B FILE
fai-cd [OPTION] -d URL
fai-cd [OPTION] -S IMAGEFILE
This command creates a bootable ISO CD-ROM image that performs the
fully automatic installation from the CD-ROM without an install server. The
ISO image will be written to FILE. To create the image the command requires
the NFSROOT, configuration space, and optionally a partial mirror (which is
created by fai-mirror). The ISO image will contain a compressed squashfs
filesystem. This hybrid CD image can be written to an USB stick using
dd(1).
NOTE: By default, fai-cd uses the grub file from
/etc/fai/grub.cfg, which is designed for demo purposes. This grub menu
passes the "menu" flag to the FAI_FLAGS parameter, which causes a
menu with various installation and boot options to be displayed on each
boot. To avoid this, you must specify your own grub file using the -g flag,
as described below.
- -A
- Create a boot only CD image (also usable for an USB stick) with
autodiscover functionality. The CD will scan the subnet for a FAI server.
By default it shows a menu with all profiles available from which you can
select a type of installation. This image only needs 25MB. You can add the
-J option to make the image smaller.
- -B
- Create a boot only ISO image which does a network installation. It does
not include the nfsroot, the partial mirror and the config space; however
for it to automatically initiate the installation -d has to be set. By
default CONFIG_SRC will be empty.
- -b
- After creating the ISO image burn it by calling wodim(1) (a version of
cdrecord).
- -c DIRECTORY
- Override the value of FAI_CONFIGDIR set in nfsroot.conf.
- -C DIRECTORY
- Use DIRECTORY as the configuration directory instead of the default
/etc/fai. You can also set the environment variable FAI_ETC_DIR.
- -d URL
- Do not include the config space in the image. Instead set the variable to
the location of the config space to URL. This sets FAI_CONFIG_SRC in the
grub config, which is obtained from the FAI configuration dir (see -C).
Set it to "" to not set FAI_CONFIG_SRC at all. If not set, the
config space is taken from FAI_CONFIGDIR and copied to /var/lib/fai/config
in the image. Currently no file: is allowed here, instead set
FAI_CONFIGDIR in nfsroot.conf(5).
- -e
- Exclude the directory /var/tmp from the nfsroot. You may put the file
base.tar.xz in the configuration space into the subdirectory basefiles.
This option will save about 50MB of disk space. This option will exclude
the directory even when -H is given.
- -f
- Force removal of an existing ISO image before creating a new one.
- -g FILE
- Use FILE as the grub.cfg file. The script will look for FILE in CFDIR. If
FILE is located in another directory then a full path must be specified.
If not specified, use /etc/fai/grub.cfg.
- -h
- Show simple help and version.
- -H
- Do not hide directories. Using this option will consume about 45MB more
disk space on your media. By default, some directories like man pages and
locales are hidden and will not be put onto the CD or the USB stick.
- -J
- Use xz compression when calling mksquashfs. Default is gzip.
- -M
- Do not add the package mirror to the CD. Packages that would be fetched
from the mirror are obtained from the normal sources configured elsewhere,
usually remote repositories.
- -m DIRECTORY
- Use DIRECTORY as partial FAI mirror. This option is mandatory, unless you
use -M or -B.
- -n DIRECTORY
- Override the value of NFSROOT set in nfsroot.conf.
- -s blocks
- Add additional disk space to the image. Increases the size by the number
of 1M blocks specified.
- -S
- Create a squashfs image file instead of a complete iso. The image contains
the nfsroot and can be fetched through various ways over the network. For
an example, see the section "FAI without NFS" in the FAI
Guide.
- -V
- Set the volume id of the ISO. Default id is FAI_CD. You also must adjust
the CDLABEL in /etc/fai/grub.cfg, or use -g and specify your own
grub.cfg.
After you've created a mirror with fai-mirror in /media/mirror,
you can create a CD using:
# fai-cd -m /media/mirror fai-cd.iso
If you want to create a bootable USB stick (here /dev/sdf) , write
the CD image to the stick via dd(1).
# dd if=fai-cd.iso of=/dev/sdf bs=1M
It is possible to install over the network without using NFS, i.e.
by getting the nfsroot via an http request. To do so you have to create a
squashfs image using the following command:
# fai-cd -S squashfs.img
In addition to that you can create said image without a config
space and without a mirror. This is useful for when you want to avoid
creating a new image after modifying your config space or updating your
mirror:
# fai-cd -d "" -SMeJ squashfs.img
To fetch the image via http, use the following kernel command line
option:
root=live:http://your_server_or_IP/path/to/squashfs.img
Create the autodiscover boot image:
# fai-cd -JAg /etc/fai/grub.cfg.autodiscover fai-autod.iso
Create a minimalistic compressed network boot ISO image (~350MB)
without the partial mirror and basefiles:
# fai-cd -BMJe fai-cd.iso
This ISO image can even be further reduced in size using the -s
flag to fai-make-nfsroot(8).
Specify your own grub file:
# fai-cd -g /srv/fai/config/my_extras/grub.cfg -m /srv/fai/mirror
/srv/fai/iso/fai-cd.iso
Additional kernel command line options can be found in the man
page of dracut.cmdline(7). fai-cd needs enough disk space in TMPDIR (/tmp by
default) for creating the compressed filesystem. You may want to set it to
another directories, before calling fai-cd.
- /etc/fai/fai.conf
- The FAI configuration file.
- /etc/fai/grub.cfg
- The default grub2 menu configuration file for fai-cd.
Thomas Lange <lange@informatik.uni-koeln.de>