fence_ilo4_ssh - Fence agent for HP iLO over SSH
fence_ilo3_ssh - Fence agent for HP iLO3 over SSH (symlink)
fence_ilo4_ssh - Fence agent for HP iLO4 over SSH (symlink)
fence_ilo5_ssh - Fence agent for HP iLO5 over SSH (symlink)
fence_ilo_ssh is a fence agent that connects to iLO device. It
logs into device via ssh and reboot a specified outlet.
WARNING: The monitor-action is prone to timeouts. Use the
fence_ilo-equivalent to avoid this issue.
fence_ilo4_ssh accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_ilo4_ssh can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.hp.com
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- -c,
--command-prompt=[prompt]
- Force Python regex for command prompt (Default Value: ['MP>',
'hpiLO->'])
- -k,
--identity-file=[filename]
- Identity file (private key) for SSH
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP address or hostname of fencing device
- -u,
--ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 23)
- -m,
--method=[method]
- Method to fence (onoff|cycle) (Default Value: onoff)
- -p,
--password=[password]
- Login password or passphrase
- -S,
--password-script=[script]
- Script to run to retrieve password
- -n, --plug=[ip]
- IP address or hostname of fencing device (together with --port-as-ip)
- -x, --ssh
- Use SSH connection
- --ssh-options=[options]
- SSH options to use
- -l,
--username=[name]
- Login name This parameter is always required.
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- --verbose-level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --disable-timeout=[true/false]
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --port-as-ip
- Make "port/plug" to be an alias to IP address
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 5)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- --ssh-path=[path]
- Path to ssh binary (Default Value: /usr/bin/ssh)
- --telnet-path=[path]
- Path to telnet binary (Default Value: /usr/bin/telnet)
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- action
- Fencing action (Default Value: reboot)
- command_prompt
- Force Python regex for command prompt (Default Value: ['MP>',
'hpiLO->']) Obsoletes: cmd_prompt
- identity_file
- Identity file (private key) for SSH
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ip
- IP address or hostname of fencing device Obsoletes: ipaddr
- ipport
- TCP/UDP port to use for connection with device (Default Value: 23)
- method
- Method to fence (onoff|cycle) (Default Value: onoff)
- password
- Login password or passphrase Obsoletes: passwd
- password_script
- Script to run to retrieve password Obsoletes: passwd_script
- plug
- IP address or hostname of fencing device (together with --port-as-ip)
Obsoletes: port
- ssh
- Use SSH connection Obsoletes: secure
- ssh_options
- SSH options to use
- username
- Login name This parameter is always required. Obsoletes: login
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- verbose_level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- disable_timeout
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- port_as_ip
- Make "port/plug" to be an alias to IP address
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 5)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- ssh_path
- Path to ssh binary (Default Value: /usr/bin/ssh)
- telnet_path
- Path to telnet binary (Default Value: /usr/bin/telnet)