fence_rcd_serial - rcd_serial fence agent
fence_rcd_serial operates a serial cable that toggles a reset of
an opposing server using the reset switch on its motherboard. The cable
itself is simple with no power, network or moving parts. An example of the
cable is available here: https://smcleod.net/rcd-stonith/ and the circuit
design is available in the fence-agents src as SVG
fence_rcd_serial accepts options on the command line as well as
from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_rcd_serial can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: https://github.com/sammcj/fence_rcd_serial
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- -m,
--method=[method]
- Method to fence (onoff|cycle) (Default Value: cycle)
- --serial-port=[port]
- Port of the serial device (Default Value: /dev/ttyS0)
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- --verbose-level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --disable-timeout=[true/false]
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 2)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- reboot
- Reboot machine.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- action
- Fencing action (Default Value: reboot)
- method
- Method to fence (onoff|cycle) (Default Value: cycle)
- serial_port
- Port of the serial device (Default Value: /dev/ttyS0)
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- verbose_level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- disable_timeout
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 2)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)