fence_skalar - Skala-R Fence agent
A fence agent for Skala-R.
fence_skalar accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_skalar can be run by itself with command line options. This is useful
for testing and for turning outlets on or off from scripts.
Vendor URL: https://www.skala-r.ru/
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- --force
- vm_stop command parameter, force stop or not, default false
- --graceful
- vm_stop command parameter, graceful stop or not, default false
- -a, --ip=[ip]
- IP address or hostname of fencing device This parameter is always
required.
- -u,
--ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 80)
- -p,
--password=[password]
- Login password or passphrase
- -S,
--password-script=[script]
- Script to run to retrieve password
- -n, --plug=[id]
- Physical plug number on device, UUID or identification of machine This
parameter is always required.
- -z, --ssl
- Use SSL connection with verifying certificate
- --ssl-insecure
- Use SSL connection without verifying certificate
- --ssl-secure
- Use SSL connection with verifying certificate
- -l,
--username=[name]
- Login name This parameter is always required.
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- --verbose-level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- -C,
--separator=[char]
- Separator for CSV created by 'list' operation (Default Value: ,)
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --disable-timeout=[true/false]
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- --gnutlscli-path=[path]
- Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for
more then one device. Returns N/A otherwise.
- list-status
- List available plugs with aliases/virtual machines and their power state
if it can be obtained without additional commands.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- action
- Fencing action (Default Value: reboot)
- force
- vm_stop command parameter, force stop or not, default false
- graceful
- vm_stop command parameter, graceful stop or not, default false
- ip
- IP address or hostname of fencing device This parameter is always
required. Obsoletes: ipaddr
- ipport
- TCP/UDP port to use for connection with device (Default Value: 80)
- password
- Login password or passphrase Obsoletes: passwd
- password_script
- Script to run to retrieve password Obsoletes: passwd_script
- plug
- Physical plug number on device, UUID or identification of machine This
parameter is always required. Obsoletes: port
- ssl
- Use SSL connection with verifying certificate
- ssl_insecure
- Use SSL connection without verifying certificate
- ssl_secure
- Use SSL connection with verifying certificate
- username
- Login name This parameter is always required. Obsoletes: login
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode. Multiple -v flags can be stacked on the command line (e.g.,
-vvv) to increase verbosity.
- verbose_level
- Level of debugging detail in output. Defaults to the number of --verbose
flags specified on the command line, or to 1 if verbose=1 in a stonith
device configuration (i.e., on stdin).
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- separator
- Separator for CSV created by 'list' operation (Default Value: ,)
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- disable_timeout
- Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- gnutlscli_path
- Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)