ipmctl set [OPTIONS] -dimm [TARGETS] [PROPERTIES]

Displays help for the command.

Used to specify DDRT as the desired transport protocol for the current invocation of ipmctl.

Used to specify SMBUS as the desired transport protocol for the current invocation of ipmctl.

Note

The -ddrt and -smbus options are mutually exclusive and may not be used together.

Changes the output format. One of: "text" (default) or "nvmxml".

Injects or clears an error on specific PMem modules by supplying one or more comma separated PMem module identifiers. The default is to inject the error on all manageable PMem modules.

Injects an artificial media temperature in degrees Celsius into the PMem module. The firmware that is monitoring the temperature of the PMem module will then be alerted and take necessary precautions to preserve the PMem module. The value is injected immediately and will override the firmware from reading the actual media temperature of the device and use this value instead which may cause adverse reactions by the firmware and result in an alert or log.

Note

The injected temperature value will remain until the next reboot or until it is cleared.
The media temperature is an artificial temperature and will not cause harm to the part. Although firmware actions due to improper temperature injections may cause adverse effects on the PMem module.
If the Critical Shutdown Temperature, or higher, is passed in, this may cause the PMem module firmware to perform a shutdown in order to preserve the part and data.
The temperature value will be ignored on clear.

The physical address to poison.
Poison is not possible for any address in the PM region if the PM region is locked. Injected poison errors are only triggered on a subsequent read of the poisoned address in which case an error log will be generated by the firmware, but no alerts will be sent.
This command can be used to clear non-injected poison errors. The data will be zeroed after clearing. There is no requirement to enable error injection prior to request to clear poison errors.
The caller is responsible for keeping a list of injected poison errors, in order to properly clear the injected errors afterwards. Simply disabling injection does not clear injected poison errors. Injected poison errors are persistent across power cycles and system resets.

Note

System firmware (BIOS) will not read from any Intel® Optane™ PMem device
addresses that are known to be poisoned. For any poisoned address, the first read may result in a hang/fault, but system firmware (BIOS) will mark this address as poisoned so subsequent attempts to read poisoned addresses will be rejected with an error. The result of such an error may prevent booting from a namespace that has poisoned data.

Note

The address must be 256 byte aligned (e.g., 0x10000000, 0x10000100, 0x10000200...).

The type of memory to poison. One of:

Note

If the address to poison is not currently allocated as the specified
memory type, an error is returned.

Injects an artificial percentage remaining value into the PMem module. This will cause the firmware to take appropriate action based on the value and if necessary generate an error log, an alert, and update the health status.

Note

When media fatal error is injected, BSR Media Disabled status
bit will be set indicating media error, until the fatal error is cleared using disable trigger input parameter to clear this injected fatal error.

Note

Injecting a Fatal Media error is unsupported on Windows.
Contact Microsoft for assistance in performing this action.

ipmctl set -dimm Temperature=50

ipmctl set -dimm Clear=1 Temperature=1

ipmctl set -dimm 1234 Poison=0x10000200

ipmctl set -dimm 1234 Poison=0x10000200 Clear=1

ipmctl set -dimm PackageSparing=1

ipmctl set -dimm PercentageRemaining=10

ipmctl set -dimm PercentageRemaining=10 Clear=1

ipmctl set -dimm DirtyShutdown=1

Set temperature on PMem module (DimmID): Success|Error (Code) -
(Description)
Clear injected temperature on PMem module (DimmID): Success|Error
(Code) - (Description)

Poison address (Address) on PMem module (DimmID): Success|Error
(Code) - (Description)
Clear injected poison of address (Address) on PMem module
(DimmID): Success|Error (Code) - (Description)

Trigger package sparing on PMem module (DimmID): Success|Error
(Code) - (Description)
Clear injected package sparing on PMem module (DimmID):
Success|Error (Code) - (Description)

Trigger a spare capacity alarm on PMem module (DimmID):
Success|Error (Code) - (Description)
Clear injected spare capacity alarm on PMem module (DimmID):
Success|Error (Code) - (Description)

Create a media fatal error on PMem module (DimmID): Success|Error
(Code) - (Description)
Clear injected media fatal error on PMem module (DimmID):
Success|Error (Code) - (Description)