ipmctl-load-goal - Creates a memory allocation goal request from a
file
ipmctl load [OPTIONS] -source (path) -goal [TARGETS]
Creates a memory allocation goal request from a file onto one or
more PMem modules.
Note
Deleting the PCD can be used as a way to prepare individual PMem
modules for provisioning.
See the delete -pcd command.
Warning
This command may result in data loss. Data should be backed
up
to other storage before executing this command.
Note
Changing a memory allocation goal modifies how the platform
firmware maps
persistent memory in the System Physical Address space (SPA) which may result
in data loss or inaccessible data, but does not explicitly delete or modify
user data found in persistent memory.
-f, -force
Reconfiguring PMem modules is a destructive operation which requires
confirmation from the user. This option suppresses the confirmation. The force
flag will also suppress the security enabled warning as well as all other
warning prompts.
-h, -help
Displays help for the command.
-ddrt
Used to specify DDRT as the desired transport protocol
for the current invocation of ipmctl.
-smbus
Used to specify SMBUS as the desired transport protocol
for the current invocation of ipmctl.
Note
The -ddrt and -smbus options are mutually exclusive and may not be
used together.
-lpmb
Used to specify large transport payload size for the
current invocation of ipmctl.
-spmb
Used to specify small transport payload size for the
current invocation of ipmctl.
Note
The -lpmb and -spmb options are mutually exclusive and may not be
used together.
-o (text|nvmxml), -output (text|nvmxml)
Changes the output format. One of: "text"
(default) or "nvmxml". The "nvmxml" format implies the
"-force" flag.
-u (B|MB|MiB|GB|GiB|TB| TiB), -units (B|MB|MiB|GB|GiB|TB| TiB)
Changes the units that capacities are displayed in for
this command. One of: bytes (B), megabytes (MB), mebibytes (MiB), gigabytes
(GB), gibibytes (GiB), terabytes (TB) or tebibytes (TiB).
-dimm [DimmIDs]
Loads the memory allocation goal onto specific PMem
modules by supplying one or more comma separated PMem module identifiers. This
list must include all unconfigured PMem modules on the affected sockets. The
default is to load the memory allocation goal onto all manageable PMem
modules.
-socket [SocketIds]
Loads the memory allocation goal onto all manageable PMem
modules on specific sockets by supplying the socket target and one or more
comma separated socket identifiers. The default is to load the memory
allocation goal onto all manageable PMem modules on all sockets.
Loads the configuration settings stored in "config.txt"
onto all the PMem modules in the system as a memory allocation goal to be
applied by the BIOS on the next reboot.
ipmctl load -source config.txt -goal
Loads the configuration settings stored in "config.txt"
onto a specified set of PMem modules as a memory allocation goal to be
applied by the BIOS on the next reboot.
ipmctl load -source config.txt -goal -dimm 1,2,3
Loads the configuration settings stored in "config.txt"
onto all manageable PMem modules on sockets 1 and 2 as a memory allocation
goal to be applied by the BIOS on the next reboot.
ipmctl load -source config.txt -goal -socket 1,2
In order to successfully execute this command:
•The caller must have the appropriate
privileges.
•The specified PMem modules must be manageable by
the host software and must all have the same SKU.
•SKU based maximum total mapped memory is
enforced. See section [Maximum Mapped Memory Limiting].
•Existing memory allocation goals that have not
been applied and any namespaces associated with the requested PMem modules
must be deleted before running this command.
•Goal requests may not be applied by platform
firmware (BIOS) if the PMem module is in security enabled, locked state.
Note
It is recommended to disable security prior to reboot if
requesting a new goal.
Note
A goal request may be initiated even if a target PMem module is in
security state enabled, but care
must be taken to ensure the PMem module is in either unlocked or disabled
security state prior to the platform firmware (BIOS) provisioning flow
following a reboot. In addition, a warning will be presented to the user:
WARNING: Goal will not be applied unless security is disabled prior to
platform firmware (BIOS) provisioning!
•Changing the memory configuration is a
destructive operation which results in loss of data stored in the persistent
memory region. Therefore, data should be backed up to other storage before
executing this command. Targets may be limited to individual PMem modules or
sockets, but all PMem modules on affected sockets must be configured when the
command finishes. If the selected targets make this impossible, the command
will be rejected. Refer to Show System Capabilities
for a list of BIOS supported modes.
•Some requests are dependent on BIOS and/or
platform configuration. For details, refer to the Intel®
Optane™ Persistent Memory Software Memory Allocation Rules,
document number 564194. For example:
•Provisioning PMem modules for Memory Mode while
BIOS is configured for 1LM only will result in unused capacity.
•Provisioning PMem modules for Memory Mode while
not all iMCs have at least one PMem module will result in unused
capacity.
If successful, the CLI will display the memory allocation goal
stored on each PMem module as documented in the command Section [Show Memory
Allocation Goal]. If a failure occurs, an error code and message will be
displayed. If a failure occurs when configuring multiple PMem modules, the
process will exit and remove the memory allocation goal from any PMem
modules that succeeded prior to the failure.