ipmctl-modify-device - Changes the configurable setting(s) on one
or more DCPMMs
ipmctl set [OPTIONS] -dimm (DimmIDs) AveragePowerReportingTimeConstant=(100-12000)
Changes the configurable setting(s) on one or more DCPMMs.
-f, -force
Changing DCPMM setting(s) is a potentially destructive
operation which requires confirmation from the user for each DCPMM. This
option suppresses the confirmation.
-h, -help
Displays help for the command.
-o (text|nvmxml), -output (text|nvmxml)
Changes the output format. One of: "text"
(default) or "nvmxml".
-dimm (DimmIDs)
Modifies specific DCPMMs by supplying one or more
comma-separated DCPMM identifiers. However, this is not recommended as it may
put the system in an undesirable state. The default is to modify all
manageable DCPMMs.
AveragePowerReportingTimeConstantMultiplier
The value that is used to multiply the base time value
used for average power consumption measurements. Can be set to a value between
0 and 32. The default value is 0.
AveragePowerReportingTimeConstant
The value, in milliseconds, used to determine the time
constant for reporting the average power consumption measurements. Can be set
to a value between 100 and 12000, by increments of 100. The default value is
1000.
Sets average power reporting time constant multiplier to 1 on all
manageable DCPMMs
set -dimm AveragePowerReportingTimeConstant=1500
In order to successfully execute this command:
•The caller must have the appropriate
privileges.
•The specified DCPMM(s) must be manageable by the
host software.
For each DCPMM, the CLI will indicate the status of the operation.
If a failure occurs when modifying multiple DCPMMs, the process will exit
and not continue modifying the remaining DCPMMs.
Modify DIMM (DimmID): Success
Modify DIMM (DimmID): Error (Code)-(Description)