ipmctl-show-firmware - Shows detailed information about the
firmware
ipmctl show [OPTIONS] -firmware [TARGETS]
Shows detailed information about the firmware on one or more PMem
modules.
-a, -all
Shows all attributes.
Note
The all and display options are exclusive and may not be used
together.
-d (attributes), -display (attributes)
Filters the returned attributes by explicitly specifying
a comma separated list of any of the attributes defined in the Return Data
section.
Note
The all and display options are exclusive and may not be used
together.
-h, -help
Displays help for the command.
-ddrt
Used to specify DDRT as the desired transport protocol
for the current invocation of ipmctl.
-smbus
Used to specify SMBUS as the desired transport protocol
for the current invocation of ipmctl.
Note
The -ddrt and -smbus options are mutually exclusive and may not be
used together.
-o (text|nvmxml), -output (text|nvmxml)
Changes the output format. One of: "text"
(default) or "nvmxml".
-dimm [DimmIDs]
Restricts output to the firmware information for specific
PMem modules by supplying one or more comma separated PMem module identifiers.
The default is to display the firmware information for all manageable PMem
modules.
Shows the firmware information for all PMem modules in the
server.
ipmctl show -dimm -firmware
In order to successfully execute this command:
•The caller must have the appropriate
privileges.
•The specified PMem modules must be manageable by
the host software.
The default behavior is to display a table with the default
attributes listed below; the options can be used to expand or restrict the
output.
DimmID
(Default) The PMem module identifier
ActiveFWVersion
(Default) The BCD-formatted revision of the active
firmware in the format PN.RN.SV.bbbb where:
•PN = 2-digit product number
•RN = 2-digit revision number
•SV = 2-digit security version number
•bbbb = 4-digit build version
StagedFWVersion
(Default) The BCD-formatted revision of the firmware
staged for execution on the next power cycle in the format PN.RN.SV.bbbb
where:
•PN = 2-digit product number
•RN = 2-digit revision number
•SV = 2-digit security version number
•bbbb = 4-digit build version
StagedFWActivatable
The state of whether the staged firmware is activatable
or not, where:
•0 = Not activatable, reboot is required
•1 = Activatable
FWUpdateStatus
The status of the last firmware update operation. One of:
•Unknown
•Staged successfully
•Update loaded successfully
•Update failed to load, fell back to previous
firmware
FWImageMaxSize
The maximum size of a firmware image.
QuiesceRequired
The state of whether activating the firmware requires the
host to quiesce traffic prior to calling the command.
•0 = No traffic quiesce required prior to
activate
•1 = Traffic quiesce required prior to
activate
ActivationTime
The estimated activation time, in ms, required for
activating the firmware.