| Config::Model::models::LCDd::MtxOrb(3pm) | User Contributed Perl Documentation | Config::Model::models::LCDd::MtxOrb(3pm) |
Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb
Configuration classes used by Config::Model
generated from LCDd.conf
Set the initial brightness Optional. Type integer.
Set the initial contrast NOTE: The driver will ignore this if the
display
is a vfd or vkd as they don't have this feature. Optional. Type uniline.
Select the output device to use Optional. Type uniline.
The following table translates from MtxOrb key letters to logical key names. By default no keys are mapped, meaning the keypad is not used at all. Optional. Type uniline.
Optional. Type uniline.
Optional. Type uniline.
Optional. Type uniline.
Optional. Type uniline.
Optional. Type uniline.
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer.
Set the display size Optional. Type uniline.
Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200'.
Set the display type Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'.
Some old displays do not have an adjustable backlight but only can switch the backlight on/off. If you experience randomly appearing block characters, try setting this to false. Optional. Type boolean.
See the [menu] section for an explanation of the key mappings You can find out which key of your display sends which character by setting keypad_test_mode to yes and running LCDd. LCDd will output all characters it receives. Afterwards you can modify the settings above and set keypad_set_mode to no again. Optional. Type uniline.
| 2021-01-25 | perl v5.32.0 |