0-based Versus 1-based Numbers

The "DateTime" module follows a simple logic for determining whether or not a given number is 0-based or 1-based.

Month, day of month, day of week, and day of year are 1-based. Any method that is 1-based also has an equivalent 0-based method ending in "_0". So for example, this class provides both "day_of_week" and "day_of_week_0" methods.

The "day_of_week_0" method still treats Monday as the first day of the week.

All time-related numbers such as hour, minute, and second are 0-based.

Years are neither, as they can be both positive or negative, unlike any other datetime component. There is a year 0.

There is no "quarter_0" method.

Error Handling

Some errors may cause this module to die with an error string. This can only happen when calling constructor methods, methods that change the object, such as "set", or methods that take parameters. Methods that retrieve information about the object, such as "year" or "epoch", will never die.

Locales

All the object methods which return names or abbreviations return data based on a locale. This is done by setting the locale when constructing a DateTime object. If this is not set, then "en-US" is used.

Floating DateTimes

The default time zone for new DateTime objects, except where stated otherwise, is the "floating" time zone. This concept comes from the iCal standard. A floating datetime is one which is not anchored to any particular time zone. In addition, floating datetimes do not include leap seconds, since we cannot apply them without knowing the datetime's time zone.

The results of date math and comparison between a floating datetime and one with a real time zone are not really valid, because one includes leap seconds and the other does not. Similarly, the results of datetime math between two floating datetimes and two datetimes with time zones are not really comparable.

If you are planning to use any objects with a real time zone, it is strongly recommended that you do not mix these with floating datetimes.

Math

If you are going to be doing date math, please read the section "How DateTime Math Works".

Determining the Local Time Zone Can Be Slow

If $ENV{TZ} is not set, it may involve reading a number of files in /etc or elsewhere. If you know that the local time zone won't change while your code is running, and you need to make many objects for the local time zone, it is strongly recommended that you retrieve the local time zone once and cache it:

    our $App::LocalTZ = DateTime::TimeZone->new( name => 'local' );
    # then everywhere else
    my $dt = DateTime->new( ..., time_zone => $App::LocalTZ );

DateTime itself does not do this internally because local time zones can change, and there's no good way to determine if it's changed without doing all the work to look it up.

Far Future DST

Do not try to use named time zones (like "America/Chicago") with dates very far in the future (thousands of years). The current implementation of "DateTime::TimeZone" will use a huge amount of memory calculating all the DST changes from now until the future date. Use UTC or the floating time zone and you will be safe.

Globally Setting a Default Time Zone

Warning: This is very dangerous. Do this at your own risk!

By default, "DateTime" uses either the floating time zone or UTC for newly created objects, depending on the constructor.

You can force "DateTime" to use a different time zone by setting the "PERL_DATETIME_DEFAULT_TZ" environment variable.

As noted above, this is very dangerous, as it affects all code that creates a "DateTime" object, including modules from CPAN. If those modules expect the normal default, then setting this can cause confusing breakage or subtly broken data. Before setting this variable, you are strongly encouraged to audit your CPAN dependencies to see how they use "DateTime". Try running the test suite for each dependency with this environment variable set before using this in production.

Upper and Lower Bounds

Internally, dates are represented the number of days before or after 0001-01-01. This is stored as an integer, meaning that the upper and lower bounds are based on your Perl's integer size ($Config{ivsize}).

The limit on 32-bit systems is around 2^29 days, which gets you to year (+/-)1,469,903. On a 64-bit system you get 2^62 days, to year (+/-)12,626,367,463,883,278 (12.626 quadrillion).

Constructors

All constructors can die when invalid parameters are given.

Warnings

Currently, constructors will warn if you try to create a far future DateTime (year >= 5000) with any time zone besides floating or UTC. This can be very slow if the time zone has future DST transitions that need to be calculated. If the date is sufficiently far in the future this can be really slow (minutes).

All warnings from DateTime use the "DateTime" category and can be suppressed with:

    no warnings 'DateTime';

This warning may be removed in the future if DateTime::TimeZone is made much faster.

DateTime->new( ... )

    my $dt = DateTime->new(
        year       => 1966,
        month      => 10,
        day        => 25,
        hour       => 7,
        minute     => 15,
        second     => 47,
        nanosecond => 500000000,
        time_zone  => 'America/Chicago',
    );

This class method accepts the following parameters:

• year

  An integer year for the DateTime. This can be any integer number within the valid range for your system (See "Upper and Lower Bounds"). This is required.

• month

  An integer from 1-12. Defaults to 1.

• day

  An integer from 1-31. The value will be validated based on the month, to prevent creating invalid dates like February 30. Defaults to 1.

• hour

  An integer from 0-23. Hour 0 is midnight at the beginning of the given date. Defaults to 0.

• minute

  An integer from 0-59. Defaults to 0.

• second

  An integer from 0-61. Values of 60 or 61 are only allowed when the specified date and time have a leap second. Defaults to 0.

• nanosecond

  An integer that is greater than or equal to 0. If this number is greater than 1 billion, it will be normalized into the second value for the DateTime object. Defaults to 0

• locale

  A string containing a locale code, like "en-US" or "zh-Hant-TW", or an object returned by "DateTime::Locale->load". See the DateTime::Locale documentation for details. Defaults to the value of "DateTime->DefaultLocale", or "en-US" if the class default has not been set.

• time_zone

  A string containing a time zone name like "America/Chicago" or a DateTime::TimeZone object. Defaults to the value of $ENV{PERL_DATETIME_DEFAULT_TZ} or "floating" if that env var is not set. See "Globally Setting a Default Time Zone" for more details on that env var (and why you should not use it).

  A string will simply be passed to the "DateTime::TimeZone->new" method as its "name" parameter. This string may be an Olson DB time zone name ("America/Chicago"), an offset string ("+0630"), or the words "floating" or "local". See the "DateTime::TimeZone" documentation for more details.

• formatter

  An object or class name with a "format_datetime" method. This will be used to stringify the DateTime object. This is optional. If it is not specified, then stringification calls "$self->iso8601".

Invalid parameter types (like an array reference) will cause the constructor to die.

Parsing Dates

This module does not parse dates! That means there is no constructor to which you can pass things like "March 3, 1970 12:34".

Instead, take a look at the various DateTime::Format::* <https://metacpan.org/search?q=datetime%3A%3Aformat> modules on CPAN. These parse all sorts of different date formats, and you're bound to find something that can handle your particular needs.

Ambiguous Local Times

Because of Daylight Saving Time, it is possible to specify a local time that is ambiguous. For example, in the US in 2003, the transition from to saving to standard time occurred on October 26, at 02:00:00 local time. The local clock changed from 01:59:59 (saving time) to 01:00:00 (standard time). This means that the hour from 01:00:00 through 01:59:59 actually occurs twice, though the UTC time continues to move forward.

If you specify an ambiguous time, then the latest UTC time is always used, in effect always choosing standard time. In this case, you can simply subtract an hour from the object in order to move to saving time, for example:

    # This object represent 01:30:00 standard time
    my $dt = DateTime->new(
        year      => 2003,
        month     => 10,
        day       => 26,
        hour      => 1,
        minute    => 30,
        second    => 0,
        time_zone => 'America/Chicago',
    );
    print $dt->hms;    # prints 01:30:00
    # Now the object represent 01:30:00 saving time
    $dt->subtract( hours => 1 );
    print $dt->hms;    # still prints 01:30:00

Alternately, you could create the object with the UTC time zone and then call the "set_time_zone" method to change the time zone. This is a good way to ensure that the time is not ambiguous.

Invalid Local Times

Another problem introduced by Daylight Saving Time is that certain local times just do not exist. For example, in the US in 2003, the transition from standard to saving time occurred on April 6, at the change to 2:00:00 local time. The local clock changed from 01:59:59 (standard time) to 03:00:00 (saving time). This means that there is no 02:00:00 through 02:59:59 on April 6!

Attempting to create an invalid time currently causes a fatal error.

DateTime->from_epoch( epoch => $epoch, ... )

This class method can be used to construct a new DateTime object from an epoch time instead of components. Just as with the "new" method, it accepts "time_zone", "locale", and "formatter" parameters.

If the epoch value is a non-integral value, it will be rounded to nearest microsecond.

By default, the returned object will be in the UTC time zone.

DateTime->now( ... )

This class method is equivalent to calling "from_epoch" with the value returned from Perl's "time" function. Just as with the "new" method, it accepts "time_zone" and "locale" parameters.

By default, the returned object will be in the UTC time zone.

If you want sub-second resolution, use the DateTime::HiRes module's "DateTime::HiRes->now" method instead.

DateTime->today( ... )

This class method is equivalent to:

    DateTime->now(@_)->truncate( to => 'day' );

DateTime->last_day_of_month( ... )

This constructor takes the same arguments as can be given to the "new" method, except for "day". Additionally, both "year" and "month" are required.

DateTime->from_day_of_year( ... )

This constructor takes the same arguments as can be given to the "new" method, except that it does not accept a "month" or "day" argument. Instead, it requires both "year" and "day_of_year". The day of year must be between 1 and 366, and 366 is only allowed for leap years.

DateTime->from_object( object => $object, ... )

This class method can be used to construct a new DateTime object from any object that implements the "utc_rd_values" method. All "DateTime::Calendar" modules must implement this method in order to provide cross-calendar compatibility. This method accepts a "locale" and "formatter" parameter

If the object passed to this method has a "time_zone" method, that is used to set the time zone of the newly created "DateTime" object.

Otherwise, the returned object will be in the floating time zone.

$dt->clone

This object method returns a new object that is replica of the object upon which the method is called.

"Get" Methods

This class has many methods for retrieving information about an object.

$dt->year

Returns the year.

$dt->ce_year

Returns the year according to the BCE/CE numbering system. The year before year 1 in this system is year -1, aka "1 BCE".

$dt->era_name

Returns the long name of the current era, something like "Before Christ". See the "Locales" section for more details.

$dt->era_abbr

Returns the abbreviated name of the current era, something like "BC". See the "Locales" section for more details.

$dt->christian_era

Returns a string, either "BC" or "AD", according to the year.

$dt->secular_era

Returns a string, either "BCE" or "CE", according to the year.

$dt->year_with_era

Returns a string containing the year immediately followed by the appropriate era abbreviation, based on the object's locale. The year is the absolute value of "ce_year", so that year 1 is "1" and year 0 is "1BC". See the "Locales" section for more details.

$dt->year_with_christian_era

Like "year_with_era", but uses the "christian_era" method to get the era name.

$dt->year_with_secular_era

Like "year_with_era", but uses the "secular_era" method to get the era name.

$dt->month

Returns the month of the year, from 1..12.

Also available as "$dt->mon".

$dt->month_name

Returns the name of the current month. See the "Locales" section for more details.

$dt->month_abbr

Returns the abbreviated name of the current month. See the "Locales" section for more details.

$dt->day

Returns the day of the month, from 1..31.

Also available as "$dt->mday" and "$dt->day_of_month".

$dt->day_of_week

Returns the day of the week as a number, from 1..7, with 1 being Monday and 7 being Sunday.

Also available as "$dt->wday" and "$dt->dow".

$dt->local_day_of_week

Returns the day of the week as a number, from 1..7. The day corresponding to 1 will vary based on the locale. See the "Locales" section for more details.

$dt->day_name

Returns the name of the current day of the week. See the "Locales" section for more details.

$dt->day_abbr

Returns the abbreviated name of the current day of the week. See the "Locales" section for more details.

$dt->day_of_year

Returns the day of the year.

Also available as "$dt->doy".

$dt->quarter

Returns the quarter of the year, from 1..4.

$dt->quarter_name

Returns the name of the current quarter. See the "Locales" section for more details.

$dt->quarter_abbr

Returns the abbreviated name of the current quarter. See the "Locales" section for more details.

$dt->day_of_quarter

Returns the day of the quarter.

Also available as "$dt->doq".

$dt->weekday_of_month

Returns a number from 1..5 indicating which week day of the month this is. For example, June 9, 2003 is the second Monday of the month, and so this method returns 2 for that date.

$dt->ymd($optional_separator), $dt->mdy(...), $dt->dmy(...)

Each method returns the year, month, and day, in the order indicated by the method name. Years are zero-padded to four digits. Months and days are 0-padded to two digits.

By default, the values are separated by a dash (-), but this can be overridden by passing a value to the method.

The "$dt->ymd" method is also available as "$dt->date".

$dt->hour

Returns the hour of the day, from 0..23.

$dt->hour_1

Returns the hour of the day, from 1..24.

$dt->hour_12

Returns the hour of the day, from 1..12.

$dt->hour_12_0

Returns the hour of the day, from 0..11.

$dt->am_or_pm

Returns the appropriate localized abbreviation, depending on the current hour.

$dt->minute

Returns the minute of the hour, from 0..59.

Also available as "$dt->min".

$dt->second

Returns the second, from 0..61. The values 60 and 61 are used for leap seconds.

Also available as "$dt->sec".

$dt->fractional_second

Returns the second, as a real number from 0.0 until 61.999999999

The values 60 and 61 are used for leap seconds.

$dt->millisecond

Returns the fractional part of the second as milliseconds (1E-3 seconds).

Half a second is 500 milliseconds.

This value will always be rounded down to the nearest integer.

$dt->microsecond

Returns the fractional part of the second as microseconds (1E-6 seconds).

Half a second is 500,000 microseconds.

This value will always be rounded down to the nearest integer.

$dt->nanosecond

Returns the fractional part of the second as nanoseconds (1E-9 seconds).

 Half a second is 500,000,000 nanoseconds.

$dt->hms($optional_separator)

Returns the hour, minute, and second, all zero-padded to two digits. If no separator is specified, a colon (:) is used by default.

Also available as "$dt->time".

$dt->datetime($optional_separator)

This method is equivalent to:

    $dt->ymd('-') . 'T' . $dt->hms(':')

The $optional_separator parameter allows you to override the separator between the date and time, for e.g. "$dt->datetime(q{ })".

This method is also available as "$dt->iso8601", but it's not really a very good ISO8601 format, as it lacks a time zone. If called as "$dt->iso8601" you cannot change the separator, as ISO8601 specifies that "T" must be used to separate them.

$dt->rfc3339

This formats a datetime in RFC3339 format. This is the same as "$dt->datetime" with an added offset at the end of the string except if the time zone is the floating time zone.

If the offset is '+00:00' then this is represented as 'Z'. Otherwise the offset is formatted with a leading sign (+/-) and a colon separated numeric offset with hours and minutes. If the offset has a non-zero seconds component, that is also included.

$dt->stringify

This method returns a stringified version of the object. It is also how stringification overloading is implemented. If the object has a formatter, then its "format_datetime" method is used to produce a string. Otherwise, this method calls "$dt->iso8601" to produce a string. See "Formatters And Stringification" for details.

$dt->is_leap_year

This method returns a boolean value indicating whether or not the datetime object is in a leap year.

$dt->is_last_day_of_month

This method returns a boolean value indicating whether or not the datetime object is the last day of the month.

$dt->is_last_day_of_quarter

This method returns a boolean value indicating whether or not the datetime object is the last day of the quarter.

$dt->is_last_day_of_year

This method returns a boolean value indicating whether or not the datetime object is the last day of the year.

$dt->month_length

This method returns the number of days in the current month.

$dt->quarter_length

This method returns the number of days in the current quarter.

$dt->year_length

This method returns the number of days in the current year.

$dt->week

   my ( $week_year, $week_number ) = $dt->week;

Returns information about the calendar week for the date. The values returned by this method are also available separately through the "$dt->week_year" and "$dt->week_number" methods.

The first week of the year is defined by ISO as the one which contains the fourth day of January, which is equivalent to saying that it's the first week to overlap the new year by at least four days.

Typically the week year will be the same as the year that the object is in, but dates at the very beginning of a calendar year often end up in the last week of the prior year, and similarly, the final few days of the year may be placed in the first week of the next year.

$dt->week_year

Returns the year of the week. See "$dt->week" for details.

$dt->week_number

Returns the week of the year, from 1..53. See "$dt->week" for details.

$dt->week_of_month

The week of the month, from 0..5. The first week of the month is the first week that contains a Thursday. This is based on the ICU definition of week of month, and correlates to the ISO8601 week of year definition. A day in the week before the week with the first Thursday will be week 0.

$dt->jd, $dt->mjd

These return the Julian Day and Modified Julian Day, respectively. The value returned is a floating point number. The fractional portion of the number represents the time portion of the datetime.

The Julian Day is a count of days since the beginning of the Julian Period, which starts with day 0 at noon on January 1, -4712.

The Modified Julian Day is a count of days since midnight on November 17, 1858.

These methods always refer to the local time, so the Julian Day is the same for a given datetime regardless of its time zone. Or in other words, 2020-12-04T13:01:57 in "America/Chicago" has the same Julian Day as 2020-12-04T13:01:57 in "Asia/Taipei".

$dt->time_zone

This returns the DateTime::TimeZone object for the datetime object.

$dt->offset

This returns the offset from UTC, in seconds, of the datetime object's time zone.

$dt->is_dst

Returns a boolean indicating whether or not the datetime's time zone is currently in Daylight Saving Time or not.

$dt->time_zone_long_name

This is a shortcut for "$dt->time_zone->name". It's provided so that one can use "%{time_zone_long_name}" as a strftime format specifier.

$dt->time_zone_short_name

This method returns the time zone abbreviation for the current time zone, such as "PST" or "GMT". These names are not definitive, and should not be used in any application intended for general use by users around the world. That's because it's possible for multiple time zones to have the same abbreviation.

$dt->strftime( $format, ... )

This method implements functionality similar to the "strftime" method in C. However, if given multiple format strings, then it will return multiple scalars, one for each format string.

See the "strftime Patterns" section for a list of all possible strftime patterns.

If you give a pattern that doesn't exist, then it is simply treated as text.

Note that any deviation from the POSIX standard is probably a bug. DateTime should match the output of "POSIX::strftime" for any given pattern.

$dt->format_cldr( $format, ... )

This method implements formatting based on the CLDR date patterns. If given multiple format strings, then it will return multiple scalars, one for each format string.

See the "CLDR Patterns" section for a list of all possible CLDR patterns.

If you give a pattern that doesn't exist, then it is simply treated as text.

$dt->epoch

Returns the UTC epoch value for the datetime object. Datetimes before the start of the epoch will be returned as a negative number.

The return value from this method is always an integer number of seconds.

Since the epoch does not account for leap seconds, the epoch time for 1972-12-31T23:59:60 (UTC) is exactly the same as that for 1973-01-01T00:00:00.

$dt->hires_epoch

Returns the epoch as a floating point number. The floating point portion of the value represents the nanosecond value of the object. This method is provided for compatibility with the "Time::HiRes" module.

Note that this method suffers from the imprecision of floating point numbers, and the result may end up rounded to an arbitrary degree depending on your platform.

    my $dt = DateTime->new( year => 2012, nanosecond => 4 );
    say $dt->hires_epoch;

On my system, this simply prints 1325376000 because adding 0.000000004 to 1325376000 returns 1325376000.

$dt->is_finite, $dt->is_infinite

These methods allow you to distinguish normal datetime objects from infinite ones. Infinite datetime objects are documented in DateTime::Infinite.

$dt->utc_rd_values

Returns the current UTC Rata Die days, seconds, and nanoseconds as a three element list. This exists primarily to allow other calendar modules to create objects based on the values provided by this object.

$dt->local_rd_values

Returns the current local Rata Die days, seconds, and nanoseconds as a three element list. This exists for the benefit of other modules which might want to use this information for date math, such as DateTime::Event::Recurrence.

$dt->leap_seconds

Returns the number of leap seconds that have happened up to the datetime represented by the object. For floating datetimes, this always returns 0.

$dt->utc_rd_as_seconds

Returns the current UTC Rata Die days and seconds purely as seconds. This number ignores any fractional seconds stored in the object, as well as leap seconds.

$dt->locale

Returns the datetime's DateTime::Locale object.

$dt->formatter

Returns the current formatter object or class. See "Formatters And Stringification" for details.

"Set" Methods

The remaining methods provided by "DateTime", except where otherwise specified, return the object itself, thus making method chaining possible. For example:

    my $dt = DateTime->now->set_time_zone( 'Australia/Sydney' );
    my $first = DateTime
                    ->last_day_of_month( year => 2003, month => 3 )
                    ->add( days => 1 )
                    ->subtract( seconds => 1 );

$dt->set( .. )

This method can be used to change the local components of a date time. This method accepts any parameter allowed by the "new" method except for "locale" or "time_zone". Use "set_locale" and "set_time_zone" for those instead.

This method performs parameter validation just like the "new" method.

Do not use this method to do date math. Use the "add" and "subtract" methods instead.

$dt->set_year, $dt->set_month, etc.

DateTime has a "set_*" method for every item that can be passed to the constructor:

• $dt->set_year
• $dt->set_month
• $dt->set_day
• $dt->set_hour
• $dt->set_minute
• $dt->set_second
• $dt->set_nanosecond

These are shortcuts to calling "set" with a single key. They all take a single parameter.

$dt->truncate( to => ... )

This method allows you to reset some of the local time components in the object to their "zero" values. The "to" parameter is used to specify which values to truncate, and it may be one of "year", "quarter", "month", "week", "local_week", "day", "hour", "minute", or "second".

For example, if "month" is specified, then the local day becomes 1, and the hour, minute, and second all become 0.

If "week" is given, then the datetime is set to the Monday of the week in which it occurs, and the time components are all set to 0. If you truncate to "local_week", then the first day of the week is locale-dependent. For example, in the "en-US" locale, the first day of the week is Sunday.

$dt->set_locale($locale)

Sets the object's locale. You can provide either a locale code like "en-US" or an object returned by "DateTime::Locale->load".

$dt->set_time_zone($tz)

This method accepts either a time zone object or a string that can be passed as the "name" parameter to "DateTime::TimeZone->new". If the new time zone's offset is different from the old time zone, then the local time is adjusted accordingly.

For example:

    my $dt = DateTime->new(
        year      => 2000,
        month     => 5,
        day       => 10,
        hour      => 15,
        minute    => 15,
        time_zone => 'America/Los_Angeles',
    );
    print $dt->hour;    # prints 15
    $dt->set_time_zone('America/Chicago');
    print $dt->hour;    # prints 17

If the old time zone was a floating time zone, then no adjustments to the local time are made, except to account for leap seconds. If the new time zone is floating, then the UTC time is adjusted in order to leave the local time untouched.

Fans of Tsai Ming-Liang's films will be happy to know that this does work:

    my $dt = DateTime->now( time_zone => 'Asia/Taipei' );
    $dt->set_time_zone('Europe/Paris');

Yes, now we can know "ni3 na4 bian1 ji2 dian3?"

$dt->set_formatter($formatter)

Sets the formatter for the object. See "Formatters And Stringification" for details.

You can set this to "undef" to revert to the default formatter.

Math Methods

Like the set methods, math related methods always return the object itself, to allow for chaining:

    $dt->add( days => 1 )->subtract( seconds => 1 );

$dt->duration_class

This returns "DateTime::Duration", but exists so that a subclass of "DateTime" can provide a different value.

$dt->add_duration($duration_object)

This method adds a DateTime::Duration to the current datetime. See the DateTime::Duration docs for more details.

$dt->add( parameters for DateTime::Duration )

This method is syntactic sugar around the "$dt->add_duration" method. It simply creates a new DateTime::Duration object using the parameters given, and then calls the "$dt->add_duration" method.

$dt->add($duration_object)

A synonym of "$dt->add_duration($duration_object)".

$dt->subtract_duration($duration_object)

When given a DateTime::Duration object, this method simply calls "$dur->inverse" on that object and passes that new duration to the "$self->add_duration" method.

$dt->subtract( DateTime::Duration->new parameters )

Like "$dt->add", this is syntactic sugar for the "$dt->subtract_duration" method.

$dt->subtract($duration_object)

A synonym of "$dt->subtract_duration($duration_object)".

$dt->subtract_datetime($datetime)

This method returns a new DateTime::Duration object representing the difference between the two dates. The duration is relative to the object from which $datetime is subtracted. For example:

    2003-03-15 00:00:00.00000000
 -  2003-02-15 00:00:00.00000000
 -------------------------------
 = 1 month

Note that this duration is not an absolute measure of the amount of time between the two datetimes, because the length of a month varies, as well as due to the presence of leap seconds.

The returned duration may have deltas for months, days, minutes, seconds, and nanoseconds.

$dt->delta_md($datetime)

$dt->delta_days($datetime)

Each of these methods returns a new DateTime::Duration object representing some portion of the difference between two datetimes. The "$dt->delta_md" method returns a duration which contains only the month and day portions of the duration is represented. The "$dt->delta_days" method returns a duration which contains only days.

The "$dt->delta_md" and "$dt->delta_days" methods truncate the duration so that any fractional portion of a day is ignored. Both of these methods operate on the date portion of a datetime only, and so effectively ignore the time zone.

Unlike the subtraction methods, these methods always return a positive (or zero) duration.

$dt->delta_ms($datetime)

Returns a duration which contains only minutes and seconds. Any day and month differences are converted to minutes and seconds. This method always returns a positive (or zero) duration.

$dt->subtract_datetime_absolute($datetime)

This method returns a new DateTime::Duration object representing the difference between the two dates in seconds and nanoseconds. This is the only way to accurately measure the absolute amount of time between two datetimes, since units larger than a second do not represent a fixed number of seconds.

Note that because of leap seconds, this may not return the same result as doing this math based on the value returned by "$dt->epoch".

$dt->is_between( $lower, $upper )

Checks whether $dt is strictly between two other DateTime objects.

"Strictly" means that $dt must be greater than $lower and less than $upper. If it is equal to either object then this method returns false.

Class Methods

DateTime->DefaultLocale($locale)

This can be used to specify the default locale to be used when creating DateTime objects. If unset, then "en-US" is used.

This exists for backwards compatibility, but is probably best avoided. This will change the default locale for every "DateTime" object created in your application, even those created by third party libraries which also use "DateTime".

DateTime->compare( $dt1, $dt2 ), DateTime->compare_ignore_floating( $dt1, $dt2 )

    $cmp = DateTime->compare( $dt1, $dt2 );
    $cmp = DateTime->compare_ignore_floating( $dt1, $dt2 );

This method compare two DateTime objects. The semantics are compatible with Perl's "sort" function; it returns "-1" if "$dt1 < $dt2", 0 if "$dt1 == $dt2", 1 if "$dt1 > $dt2".

If one of the two DateTime objects has a floating time zone, it will first be converted to the time zone of the other object. This is what you want most of the time, but it can lead to inconsistent results when you compare a number of DateTime objects, some of which are floating, and some of which are in other time zones.

If you want to have consistent results (because you want to sort an array of objects, for example), you can use the "compare_ignore_floating" method:

    @dates = sort { DateTime->compare_ignore_floating( $a, $b ) } @dates;

In this case, objects with a floating time zone will be sorted as if they were UTC times.

Since DateTime objects overload comparison operators, this:

    @dates = sort @dates;

is equivalent to this:

    @dates = sort { DateTime->compare( $a, $b ) } @dates;

DateTime objects can be compared to any other calendar class that implements the "utc_rd_values" method.

Testing Code That Uses DateTime

If you are trying to test code that calls uses DateTime, you may want to be to explicitly set the value returned by Perl's "time" builtin. This builtin is called by "DateTime->now" and "DateTime->today".

You can override "CORE::GLOBAL::time", but this will only work if you do this before loading DateTime. If doing this is inconvenient, you can also override "DateTime::_core_time":

    no warnings 'redefine';
    local *DateTime::_core_time = sub { return 42 };

DateTime is guaranteed to call this subroutine to get the current "time" value. You can also override the "_core_time" sub in a subclass of DateTime and use that.

How DateTime Math Works

It's important to have some understanding of how datetime math is implemented in order to effectively use this module and DateTime::Duration.

Making Things Simple

If you want to simplify your life and not have to think too hard about the nitty-gritty of datetime math, I have several recommendations:

• use the floating time zone

  If you do not care about time zones or leap seconds, use the "floating" timezone:

      my $dt = DateTime->now( time_zone => 'floating' );
      

  Math done on two objects in the floating time zone produces very predictable results.

  Note that in most cases you will want to start by creating an object in a specific zone and then convert it to the floating time zone. When an object goes from a real zone to the floating zone, the time for the object remains the same.

  This means that passing the floating zone to a constructor may not do what you want.

      my $dt = DateTime->now( time_zone => 'floating' );
      

  is equivalent to

      my $dt = DateTime->now( time_zone => 'UTC' )->set_time_zone('floating');
      

  This might not be what you wanted. Instead, you may prefer to do this:

      my $dt = DateTime->now( time_zone => 'local' )->set_time_zone('floating');
      

• use UTC for all calculations

  If you do care about time zones (particularly DST) or leap seconds, try to use non-UTC time zones for presentation and user input only. Convert to UTC immediately and convert back to the local time zone for presentation:

      my $dt = DateTime->new( %user_input, time_zone => $user_tz );
      $dt->set_time_zone('UTC');
      # do various operations - store it, retrieve it, add, subtract, etc.
      $dt->set_time_zone($user_tz);
      print $dt->datetime;
      

• math on non-UTC time zones

  If you need to do date math on objects with non-UTC time zones, please read the caveats below carefully. The results "DateTime" produces are predictable, correct, and mostly intuitive, but datetime math gets very ugly when time zones are involved, and there are a few strange corner cases involving subtraction of two datetimes across a DST change.

  If you can always use the floating or UTC time zones, you can skip ahead to "Leap Seconds and Date Math"

• date vs datetime math

  If you only care about the date (calendar) portion of a datetime, you should use either "$dt->delta_md"> or "$dt->delta_days", not "$dt->subtract_datetime". This will give predictable, unsurprising results, free from DST-related complications.

• $dt->subtract_datetime and $dt->add_duration

  You must convert your datetime objects to the UTC time zone before doing date math if you want to make sure that the following formulas are always true:

      $dt2 - $dt1 = $dur
      $dt1 + $dur = $dt2
      $dt2 - $dur = $dt1
      

  Note that using "$dt->delta_days" ensures that this formula always works, regardless of the time zones of the objects involved, as does using "$dt->subtract_datetime_absolute". Other methods of subtraction are not always reversible.

• never do math on two objects where only one is in the floating time zone

  The date math code accounts for leap seconds whenever the "DateTime" object is not in the floating time zone. If you try to do math where one object is in the floating zone and the other isn't, the results will be confusing and wrong.

Adding a Duration to a DateTime

The parts of a duration can be broken down into five parts. These are months, days, minutes, seconds, and nanoseconds. Adding one month to a date is different than adding 4 weeks or 28, 29, 30, or 31 days. Similarly, due to DST and leap seconds, adding a day can be different than adding 86,400 seconds, and adding a minute is not exactly the same as 60 seconds.

We cannot convert between these units, except for seconds and nanoseconds, because there is no fixed conversion between most pairs of units. That is because of things like leap seconds, DST changes, etc.

"DateTime" always adds (or subtracts) days, then months, minutes, and then seconds and nanoseconds. If there are any boundary overflows, these are normalized at each step. For the days and months the local (not UTC) values are used. For minutes and seconds, the local values are used. This generally just works.

This means that adding one month and one day to February 28, 2003 will produce the date April 1, 2003, not March 29, 2003.

    my $dt = DateTime->new( year => 2003, month => 2, day => 28 );
    $dt->add( months => 1, days => 1 );
    # 2003-04-01 - the result

On the other hand, if we add months first, and then separately add days, we end up with March 29, 2003:

    $dt->add( months => 1 )->add( days => 1 );
    # 2003-03-29

We see similar strangeness when math crosses a DST boundary:

    my $dt = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 5,
        hour      => 1,
        minute    => 58,
        time_zone => "America/Chicago",
    );
    $dt->add( days => 1, minutes => 3 );
    # 2003-04-06 02:01:00
    $dt->add( minutes => 3 )->add( days => 1 );
    # 2003-04-06 03:01:00

Note that if you converted the datetime object to UTC first you would get predictable results.

If you want to know how many seconds a DateTime::Duration object represents, you have to add it to a datetime to find out, so you could do:

    my $now   = DateTime->now( time_zone => 'UTC' );
    my $later = $now->clone->add_duration($duration);
    my $seconds_dur = $later->subtract_datetime_absolute($now);

This returns a DateTime::Duration which only contains seconds and nanoseconds.

If we were add the duration to a different "DateTime" object we might get a different number of seconds.

DateTime::Duration supports three different end-of-month algorithms for adding months. This comes into play when an addition results in a day past the end of the following month (for example, adding one month to January 30).

    # 2010-08-31 + 1 month = 2010-10-01
    $dt->add( months => 1, end_of_month => 'wrap' );
    # 2010-01-30 + 1 month = 2010-02-28
    $dt->add( months => 1, end_of_month => 'limit' );
    # 2010-04-30 + 1 month = 2010-05-31
    $dt->add( months => 1, end_of_month => 'preserve' );

By default, it uses "wrap" for positive durations and "preserve" for negative durations. See DateTime::Duration for a detailed explanation of these algorithms.

If you need to do lots of work with durations, take a look at the DateTime::Format::Duration module, which lets you present information from durations in many useful ways.

There are other subtract/delta methods in "DateTime" to generate different types of durations. These methods are "$dt->subtract_datetime", "$dt->subtract_datetime_absolute", "$dt->delta_md", "$dt->delta_days", and "$dt->delta_ms".

DateTime Subtraction

Date subtraction is done based solely on the two object's local datetimes, with one exception to handle DST changes. Also, if the two datetime objects are in different time zones, one of them is converted to the other's time zone first before subtraction. This is best explained through examples:

The first of these probably makes the most sense:

    # not DST
    my $dt1 = DateTime->new(
        year      => 2003,
        month     => 5,
        day       => 6,
        time_zone => 'America/Chicago',
    );
    # is DST
    my $dt2 = DateTime->new(
        year      => 2003,
        month     => 11,
        day       => 6,
        time_zone => 'America/Chicago',
    );
    # 6 months
    my $dur = $dt2->subtract_datetime($dt1);

Nice and simple.

This one is a little trickier, but still fairly logical:

    # is DST
    my $dt1 = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 5,
        hour      => 1,
        minute    => 58,
        time_zone => "America/Chicago",
    );
    # not DST
    my $dt2 = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 7,
        hour      => 2,
        minute    => 1,
        time_zone => "America/Chicago",
    );
    # 2 days and 3 minutes
    my $dur = $dt2->subtract_datetime($dt1);

Which contradicts the result this one gives, even though they both make sense:

    # is DST
    my $dt1 = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 5,
        hour      => 1,
        minute    => 58,
        time_zone => "America/Chicago",
    );
    # not DST
    my $dt2 = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 6,
        hour      => 3,
        minute    => 1,
        time_zone => "America/Chicago",
    );
    # 1 day and 3 minutes
    my $dur = $dt2->subtract_datetime($dt1);

This last example illustrates the "DST" exception mentioned earlier. The exception accounts for the fact 2003-04-06 only lasts 23 hours.

And finally:

    my $dt2 = DateTime->new(
        year      => 2003,
        month     => 10,
        day       => 26,
        hour      => 1,
        time_zone => 'America/Chicago',
    );
    my $dt1 = $dt2->clone->subtract( hours => 1 );
    # 60 minutes
    my $dur = $dt2->subtract_datetime($dt1);

This seems obvious until you realize that subtracting 60 minutes from $dt2 in the above example still leaves the clock time at "01:00:00". This time we are accounting for a 25 hour day.

Reversibility

Date math operations are not always reversible. This is because of the way that addition operations are ordered. As was discussed earlier, adding 1 day and 3 minutes in one call to "$dt->add"> is not the same as first adding 3 minutes and 1 day in two separate calls.

If we take a duration returned from "$dt->subtract_datetime" and then try to add or subtract that duration from one of the datetimes we just used, we sometimes get interesting results:

    my $dt1 = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 5,
        hour      => 1,
        minute    => 58,
        time_zone => "America/Chicago",
    );
    my $dt2 = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 6,
        hour      => 3,
        minute    => 1,
        time_zone => "America/Chicago",
    );
    # 1 day and 3 minutes
    my $dur = $dt2->subtract_datetime($dt1);
    # gives us $dt2
    $dt1->add_duration($dur);
    # gives us 2003-04-05 02:58:00 - 1 hour later than $dt1
    $dt2->subtract_duration($dur);

The "$dt->subtract_duration" operation gives us a (perhaps) unexpected answer because it first subtracts one day to get 2003-04-05T03:01:00 and then subtracts 3 minutes to get the final result.

If we explicitly reverse the order we can get the original value of $dt1. This can be facilitated by the DateTime::Duration class's "$dur->calendar_duration" and "$dur->clock_duration" methods:

    $dt2->subtract_duration( $dur->clock_duration )
        ->subtract_duration( $dur->calendar_duration );

Leap Seconds and Date Math

The presence of leap seconds can cause even more anomalies in date math. For example, the following is a legal datetime:

    my $dt = DateTime->new(
        year      => 1972,
        month     => 12,
        day       => 31,
        hour      => 23,
        minute    => 59,
        second    => 60,
        time_zone => 'UTC'
    );

If we add one month ...

    $dt->add( months => 1 );

... the datetime is now "1973-02-01 00:00:00", because there is no 23:59:60 on 1973-01-31.

Leap seconds also force us to distinguish between minutes and seconds during date math. Given the following datetime ...

    my $dt = DateTime->new(
        year      => 1972,
        month     => 12,
        day       => 31,
        hour      => 23,
        minute    => 59,
        second    => 30,
        time_zone => 'UTC'
    );

... we will get different results when adding 1 minute than we get if we add 60 seconds. This is because in this case, the last minute of the day, beginning at 23:59:00, actually contains 61 seconds.

Here are the results we get:

    # 1972-12-31 23:59:30 - our starting datetime
    my $dt = DateTime->new(
        year      => 1972,
        month     => 12,
        day       => 31,
        hour      => 23,
        minute    => 59,
        second    => 30,
        time_zone => 'UTC'
    );
    # 1973-01-01 00:00:30 - one minute later
    $dt->clone->add( minutes => 1 );
    # 1973-01-01 00:00:29 - 60 seconds later
    $dt->clone->add( seconds => 60 );
    # 1973-01-01 00:00:30 - 61 seconds later
    $dt->clone->add( seconds => 61 );

Local vs. UTC and 24 hours vs. 1 day

When math crosses a daylight saving boundary, a single day may have more or less than 24 hours.

For example, if you do this ...

    my $dt = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 5,
        hour      => 2,
        time_zone => 'America/Chicago',
    );
    $dt->add( days => 1 );

... then you will produce an invalid local time, and therefore an exception will be thrown.

However, this works ...

    my $dt = DateTime->new(
        year      => 2003,
        month     => 4,
        day       => 5,
        hour      => 2,
        time_zone => 'America/Chicago',
    );
    $dt->add( hours => 24 );

... and produces a datetime with the local time of "03:00".

If all this makes your head hurt, there is a simple alternative. Just convert your datetime object to the "UTC" time zone before doing date math on it, and switch it back to the local time zone afterwards. This avoids the possibility of having date math throw an exception, and makes sure that 1 day equals 24 hours. Of course, this may not always be desirable, so caveat user!

Overloading

This module explicitly overloads the addition (+), subtraction (-), string and numeric comparison operators. This means that the following all do sensible things:

    my $new_dt = $dt + $duration_obj;
    my $new_dt = $dt - $duration_obj;
    my $duration_obj = $dt - $new_dt;
    foreach my $dt ( sort @dts ) {...}

Additionally, the fallback parameter is set to true, so other derivable operators (+=, -=, etc.) will work properly. Do not expect increment (++) or decrement (--) to do anything useful.

The string comparison operators, "eq" or "ne", will use the string value to compare with non-DateTime objects.

DateTime objects do not have a numeric value, using "==" or "<=>" to compare a DateTime object with a non-DateTime object will result in an exception. To safely sort mixed DateTime and non-DateTime objects, use "sort { $a cmp $b } @dates".

The module also overloads stringification using the object's formatter, defaulting to "iso8601" method. See "Formatters And Stringification" for details.

Formatters And Stringification

You can optionally specify a "formatter", which is usually a "DateTime::Format::*" object or class, to control the stringification of the DateTime object.

Any of the constructor methods can accept a formatter argument:

    my $formatter = DateTime::Format::Strptime->new(...);
    my $dt        = DateTime->new( year => 2004, formatter => $formatter );

Or, you can set it afterwards:

    $dt->set_formatter($formatter);
    $formatter = $dt->formatter;

Once you set the formatter, the overloaded stringification method will use the formatter. If unspecified, the "iso8601" method is used.

A formatter can be handy when you know that in your application you want to stringify your DateTime objects into a special format all the time, for example in Postgres format.

If you provide a formatter class name or object, it must implement a "format_datetime" method. This method will be called with just the "DateTime" object as its argument.

CLDR Patterns

The CLDR pattern language is both more powerful and more complex than strftime. Unlike strftime patterns, you often have to explicitly escape text that you do not want formatted, as the patterns are simply letters without any prefix.

For example, "yyyy-MM-dd" is a valid CLDR pattern. If you want to include any lower or upper case ASCII characters as-is, you can surround them with single quotes ('). If you want to include a single quote, you must escape it as two single quotes ('').

    my $pattern1 = q{'Today is ' EEEE};
    my $pattern2 = q{'It is now' h 'o''clock' a};

Spaces and any non-letter text will always be passed through as-is.

Many CLDR patterns which produce numbers will pad the number with leading zeroes depending on the length of the format specifier. For example, "h" represents the current hour from 1-12. If you specify "hh" then hours 1-9 will have a leading zero prepended.

However, CLDR often uses five of a letter to represent the narrow form of a pattern. This inconsistency is necessary for backwards compatibility.

There are many cases where CLDR patterns distinguish between the "format" and "stand-alone" forms of a pattern. The format pattern is used when the thing in question is being placed into a larger string. The stand-alone form is used when displaying that item by itself, for example in a calendar.

There are also many cases where CLDR provides three sizes for each item, wide (the full name), abbreviated, and narrow. The narrow form is often just a single character, for example "T" for "Tuesday", and may not be unique.

CLDR provides a fairly complex system for localizing time zones that we ignore entirely. The time zone patterns just use the information provided by "DateTime::TimeZone", and do not follow the CLDR spec.

The output of a CLDR pattern is always localized, when applicable.

CLDR provides the following patterns:

• G{1,3}

  The abbreviated era (BC, AD).

• GGGG

  The wide era (Before Christ, Anno Domini).

• GGGGG

  The narrow era, if it exists (but it mostly doesn't).

• y and y{3,}

  The year, zero-prefixed as needed. Negative years will start with a "-", and this will be included in the length calculation.

  In other, words the "yyyyy" pattern will format year -1234 as "-1234", not "-01234".

• yy

  This is a special case. It always produces a two-digit year, so "1976" becomes "76". Negative years will start with a "-", making them one character longer.

• Y{1,}

  The year in "week of the year" calendars, from "$dt->week_year".

• u{1,}

  Same as "y" except that "uu" is not a special case.

• Q{1,2}

  The quarter as a number (1..4).

• QQQ

  The abbreviated format form for the quarter.

• QQQQ

  The wide format form for the quarter.

• q{1,2}

  The quarter as a number (1..4).

• qqq

  The abbreviated stand-alone form for the quarter.

• qqqq

  The wide stand-alone form for the quarter.

• M{1,2]

  The numerical month.

• MMM

  The abbreviated format form for the month.

• MMMM

  The wide format form for the month.

• MMMMM

  The narrow format form for the month.

• L{1,2]

  The numerical month.

• LLL

  The abbreviated stand-alone form for the month.

• LLLL

  The wide stand-alone form for the month.

• LLLLL

  The narrow stand-alone form for the month.

• w{1,2}

  The week of the year, from "$dt->week_number".

• W

  The week of the month, from "$dt->week_of_month".

• d{1,2}

  The numeric day of the month.

• D{1,3}

  The numeric day of the year.

• F

  The day of the week in the month, from "$dt->weekday_of_month".

• g{1,}

  The modified Julian day, from "$dt->mjd".

• E{1,3} and eee

  The abbreviated format form for the day of the week.

• EEEE and eeee

  The wide format form for the day of the week.

• EEEEE and eeeee

  The narrow format form for the day of the week.

• e{1,2}

  The local numeric day of the week, from 1 to 7. This number depends on what day is considered the first day of the week, which varies by locale. For example, in the US, Sunday is the first day of the week, so this returns 2 for Monday.

• c

  The numeric day of the week from 1 to 7, treating Monday as the first of the week, regardless of locale.

• ccc

  The abbreviated stand-alone form for the day of the week.

• cccc

  The wide stand-alone form for the day of the week.

• ccccc

  The narrow format form for the day of the week.

• a

  The localized form of AM or PM for the time.

• h{1,2}

  The hour from 1-12.

• H{1,2}

  The hour from 0-23.

• K{1,2}

  The hour from 0-11.

• k{1,2}

  The hour from 1-24.

• j{1,2}

  The hour, in 12 or 24 hour form, based on the preferred form for the locale. In other words, this is equivalent to either "h{1,2}" or "H{1,2}".

• m{1,2}

  The minute.

• s{1,2}

  The second.

• S{1,}

  The fractional portion of the seconds, rounded based on the length of the specifier. This returned without a leading decimal point, but may have leading or trailing zeroes.

• A{1,}

  The millisecond of the day, based on the current time. In other words, if it is 12:00:00.00, this returns 43200000.

• z{1,3}

  The time zone short name.

• zzzz

  The time zone long name.

• Z{1,3}

  The time zone offset.

• ZZZZ

  The time zone short name and the offset as one string, so something like "CDT-0500".

• ZZZZZ

  The time zone offset as a sexagesimal number, so something like "-05:00". (This is useful for W3C format.)

• v{1,3}

  The time zone short name.

• vvvv

  The time zone long name.

• V{1,3}

  The time zone short name.

• VVVV

  The time zone long name.

CLDR "Available Formats"

The CLDR data includes pre-defined formats for various patterns such as "month and day" or "time of day". Using these formats lets you render information about a datetime in the most natural way for users from a given locale.

These formats are indexed by a key that is itself a CLDR pattern. When you look these up, you get back a different CLDR pattern suitable for the locale.

Let's look at some example We'll use "2008-02-05T18:30:30" as our example datetime value, and see how this is rendered for the "en-US" and "fr-FR" locales.

• "MMMd"

  The abbreviated month and day as number. For "en-US", we get the pattern "MMM d", which renders as "Feb 5". For "fr-FR", we get the pattern "d MMM", which renders as "5 févr.".

• "yQQQ"

  The year and abbreviated quarter of year. For "en-US", we get the pattern "QQQ y", which renders as "Q1 2008". For "fr-FR", we get the same pattern, "QQQ y", which renders as "T1 2008".

• "hm"

  The 12-hour time of day without seconds. For "en-US", we get the pattern "h:mm a", which renders as "6:30 PM". For "fr-FR", we get the exact same pattern and rendering.

The available formats for each locale are documented in the POD for that locale. To get back the format, you use the "$locale->format_for" method. For example:

    say $dt->format_cldr( $dt->locale->format_for('MMMd') );

strftime Patterns

The following patterns are allowed in the format string given to the "$dt->strftime" method:

• %a

  The abbreviated weekday name.

• %A

  The full weekday name.

• %b

  The abbreviated month name.

• %B

  The full month name.

• %c

  The default datetime format for the object's locale.

• %C

  The century number (year/100) as a 2-digit integer.

• %d

  The day of the month as a decimal number (range 01 to 31).

• %D

  Equivalent to %m/%d/%y. This is not a good standard format if you want folks from both the United States and the rest of the world to understand the date!

• %e

  Like %d, the day of the month as a decimal number, but a leading zero is replaced by a space.

• %F

  Equivalent to %Y-%m-%d (the ISO 8601 date format)

• %G

  The ISO 8601 year with century as a decimal number. The 4-digit year corresponding to the ISO week number (see %V). This has the same format and value as %Y, except that if the ISO week number belongs to the previous or next year, that year is used instead. (TZ)

• %g

  Like %G, but without century, i.e., with a 2-digit year (00-99).

• %h

  Equivalent to %b.

• %H

  The hour as a decimal number using a 24-hour clock (range 00 to 23).

• %I

  The hour as a decimal number using a 12-hour clock (range 01 to 12).

• %j

  The day of the year as a decimal number (range 001 to 366).

• %k

  The hour (24-hour clock) as a decimal number (range 0 to 23); single digits are preceded by a blank. (See also %H.)

• %l

  The hour (12-hour clock) as a decimal number (range 1 to 12); single digits are preceded by a blank. (See also %I.)

• %m

  The month as a decimal number (range 01 to 12).

• %M

  The minute as a decimal number (range 00 to 59).

• %n

  A newline character.

• %N

  The fractional seconds digits. Default is 9 digits (nanoseconds).

      %3N   milliseconds (3 digits)
      %6N   microseconds (6 digits)
      %9N   nanoseconds  (9 digits)
      

  This value will always be rounded down to the nearest integer.

• %p

  Either `AM' or `PM' according to the given time value, or the corresponding strings for the current locale. Noon is treated as `pm' and midnight as `am'.

• %P

  Like %p but in lowercase: `am' or `pm' or a corresponding string for the current locale.

• %r

  The time in a.m. or p.m. notation. In the POSIX locale this is equivalent to `%I:%M:%S %p'.

• %R

  The time in 24-hour notation (%H:%M). (SU) For a version including the seconds, see %T below.

• %s

  The number of seconds since the epoch.

• %S

  The second as a decimal number (range 00 to 61).

• %t

  A tab character.

• %T

  The time in 24-hour notation (%H:%M:%S).

• %u

  The day of the week as a decimal, range 1 to 7, Monday being 1. See also %w.

• %U

  The week number of the current year as a decimal number, range 00 to 53, starting with the first Sunday as the first day of week 01. See also %V and %W.

• %V

  The ISO 8601:1988 week number of the current year as a decimal number, range 01 to 53, where week 1 is the first week that has at least 4 days in the current year, and with Monday as the first day of the week. See also %U and %W.

• %w

  The day of the week as a decimal, range 0 to 6, Sunday being 0. See also %u.

• %W

  The week number of the current year as a decimal number, range 00 to 53, starting with the first Monday as the first day of week 01.

• %x

  The default date format for the object's locale.

• %X

  The default time format for the object's locale.

• %y

  The year as a decimal number without a century (range 00 to 99).

• %Y

  The year as a decimal number including the century.

• %z

  The time-zone as hour offset from UTC. Required to emit RFC822-conformant dates (using "%a, %d %b %Y %H:%M:%S %z").

• %Z

  The short name for the time zone, typically an abbreviation like "EST" or "AEST".

• %%

  A literal `%' character.

• %{method}

  Any method name may be specified using the format "%{method}" name where "method" is a valid "DateTime" object method.

DateTime and Storable

"DateTime" implements Storable hooks in order to reduce the size of a serialized "DateTime" object.

DateTime::Set

The DateTime::Set module represents sets (including recurrences) of datetimes. Many modules return sets or recurrences.

Format Modules

The various format modules exist to parse and format datetimes. For example, DateTime::Format::HTTP parses dates according to the RFC 1123 format:

    my $datetime
        = DateTime::Format::HTTP->parse_datetime(
        'Thu Feb  3 17:03:55 GMT 1994');
    print DateTime::Format::HTTP->format_datetime($datetime);

Most format modules are suitable for use as a "formatter" with a DateTime object.

All format modules start with DateTime::Format:: <https://metacpan.org/search?q=datetime%3A%3Aformat>.

Calendar Modules

There are a number of modules on CPAN that implement non-Gregorian calendars, such as the Chinese, Mayan, and Julian calendars.

All calendar modules start with DateTime::Calendar:: <https://metacpan.org/search?q=datetime%3A%3Acalendar>.

Event Modules

There are a number of modules that calculate the dates for events, such as Easter, Sunrise, etc.

All event modules start with DateTime::Event:: <https://metacpan.org/search?q=datetime%3A%3Aevent>.

Others

There are many other modules that work with DateTime, including modules in the DateTimeX namespace <https://metacpan.org/search?q=datetimex> namespace, as well as others.

See MetaCPAN <https://metacpan.org/search?q=datetime> for more modules.