DOKK / manpages / debian 11 / libevdev-tools / libevdev-tweak-device.1.en
LIBEVDEV-TWEAK-DEVICE(1) General Commands Manual LIBEVDEV-TWEAK-DEVICE(1)

libevdev-tweak-device - modify an evdev kernel device

libevdev-tweak-device --abs ABS_X [--min a] [--max b] [--res c] [--fuzz d] [--flat e] /dev/input/eventX libevdev-tweak-device --resolution res[,yres] /dev/input/eventX

libevdev-tweak-device --led LED_NUML --on|--off /dev/input/eventX

The libevdev-tweak-device tool changes the properties of the evdev kernel device at /dev/input/eventX. Currently this may be used to force an LED on or off, or to change the properties of an absolute axis (e.g. its minimum/maximum range or resolution). Changes are permanent until the device is removed.

Change the given named ABS_ kernel axis, e.g. ABS_X. For a full list, see linux/input.h. Each of the options min, max, res, fuzz, flat may be given.
Set the absinfo minimum to the value v
Set the absinfo maximum to the value v
Set the absinfo resolution to the value v
Set the absinfo fuzz to the value v
Set the absinfo flat to the value v

Changes the resolution of the ABS_X, ABS_MT_POSITION_X, ABS_Y, and ABS_MT_POSITION_Y axis to the given resolution. If only one resolution value is provided, both x and y axis are set to the same resolution, otherwise the first resolution value is applied to the x axes and the second value to the y axes.

Change the given LED, e.g. LED_NUML. For a full list, see linux/input.h.
Change the LED state to on
Change the LED state to off

The kernel does not notify processes about absinfo property changes. Any process that has previously obtained the absinfo from the device will remain on the old information. This makes using this tool potentially racy, use with caution.