DOKK / manpages / debian 11 / libmodbus-dev / modbus_set_float_badc.3.en
MODBUS_SET_FLOAT_BAD(3) libmodbus Manual MODBUS_SET_FLOAT_BAD(3)

modbus_set_float_badc - set a float value in 2 registers using BADC byte order

void modbus_set_float_badc(float f, uint16_t *dest);

The modbus_set_float_badc() function shall set a float to 4 bytes in swapped bytes Modbus format (BADC insted of ABCD). The dest array must be pointer on two 16 bits values to be able to store the full result of the conversion.

There is no return values.

modbus_get_float_badc(3) modbus_set_float_abcd(3) modbus_set_float_cdab(3) modbus_set_float_dcba(3)

The libmodbus documentation was written by Stéphane Raimbault <stephane.raimbault@gmail.com>

12/09/2019 libmodbus v3.1.6