Functions

file_exists_ok( FILENAME [, NAME ] )

Ok if the file exists, and not ok otherwise.

file_not_exists_ok( FILENAME [, NAME ] )

Ok if the file does not exist, and not okay if it does exist.

file_empty_ok( FILENAME [, NAME ] )

Ok if the file exists and has empty size, not ok if the file does not exist or exists with non-zero size.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_not_empty_ok( FILENAME [, NAME ] )

Ok if the file exists and has non-zero size, not ok if the file does not exist or exists with zero size.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_size_ok( FILENAME, SIZE [, NAME ] )

Ok if the file exists and has SIZE size in bytes (exactly), not ok if the file does not exist or exists with size other than SIZE.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_max_size_ok( FILENAME, MAX [, NAME ] )

Ok if the file exists and has size less than or equal to MAX bytes, not ok if the file does not exist or exists with size greater than MAX bytes.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_min_size_ok( FILENAME, MIN [, NAME ] )

Ok if the file exists and has size greater than or equal to MIN bytes, not ok if the file does not exist or exists with size less than MIN bytes.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_line_count_is( FILENAME, COUNT [, NAME ] )

Ok if the file exists and has COUNT lines (exactly), not ok if the file does not exist or exists with a line count other than COUNT.

This function uses the current value of $/ as the line ending and counts the lines by reading them and counting how many it read.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_line_count_isnt( FILENAME, COUNT [, NAME ] )

Ok if the file exists and doesn't have exactly COUNT lines, not ok if the file does not exist or exists with a line count of COUNT. Read that carefully: the file must exist for this test to pass!

This function uses the current value of $/ as the line ending and counts the lines by reading them and counting how many it read.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_line_count_between( FILENAME, MIN, MAX, [, NAME ] )

Ok if the file exists and has a line count between MIN and MAX, inclusively.

This function uses the current value of $/ as the line ending and counts the lines by reading them and counting how many it read.

Previously this tried to test any sort of file. Sometime in the future this will fail if the argument is not a plain file.

file_contains_like ( FILENAME, PATTERN [, NAME ] )

Ok if the file exists and its contents (as one big string) match PATTERN, not ok if the file does not exist, is not readable, or exists but doesn't match PATTERN.

Since the file contents are read into memory, you should not use this for large files. Besides memory consumption, test diagnostics for failing tests might be difficult to decipher. However, for short files this works very well.

Because the entire contents are treated as one large string, you can make a pattern that tests multiple lines. Don't forget that you may need to use the /s modifier for such patterns:

        # make sure file has one or more paragraphs with CSS class X
        file_contains_like($html_file, qr{<p class="X">.*?</p>}s);
    

Contrariwise, if you need to match at the beginning or end of a line inside the file, use the /m modifier:

        # make sure file has a setting for foo
        file_contains_like($config_file, qr/^ foo \s* = \s* \w+ $/mx);
    

If you want to test your file contents against multiple patterns, but don't want to have the file read in repeatedly, you can pass an arrayref of patterns instead of a single pattern, like so:

        # make sure our template has rendered correctly
        file_contains_like($template_out,
                [
                qr/^ $title_line $/mx,
                map { qr/^ $_ $/mx } @chapter_headings,
                qr/^ $footer_line $/mx,
                ]);
    

Please note that if you do this, and your file does not exist or is not readable, you'll only get one test failure instead of a failure for each pattern. This could cause your test plan to be off, although you may not care at that point because your test failed anyway. If you do care, either skip the test plan altogether by employing Test::More's "done_testing()" function, or use "file_readable_ok" in conjunction with a "SKIP" block.

Contributed by Buddy Burden "<barefoot@cpan.org>".

file_contains_unlike ( FILENAME, PATTERN [, NAME ] )

Ok if the file exists and its contents (as one big string) do not match PATTERN, not ok if the file does not exist, is not readable, or exists but matches PATTERN.

All notes and caveats for "file_contains_like" apply to this function as well.

Contributed by Buddy Burden "<barefoot@cpan.org>".

file_contains_utf8_like ( FILENAME, PATTERN [, NAME ] )

The same as "file_contains_like", except the file is opened as UTF-8.

file_contains_utf8_unlike ( FILENAME, PATTERN [, NAME ] )

The same as "file_contains_unlike", except the file is opened as UTF-8.

file_contains_encoded_like ( FILENAME, ENCODING, PATTERN [, NAME ] )

The same as "file_contains_like", except the file is opened with ENCODING

file_contains_encoded_unlike ( FILENAME, ENCODING, PATTERN [, NAME ] )

The same as "file_contains_unlike", except the file is opened with ENCODING.

file_readable_ok( FILENAME [, NAME ] )

Ok if the file exists and is readable, not ok if the file does not exist or is not readable.

file_not_readable_ok( FILENAME [, NAME ] )

Ok if the file exists and is not readable, not ok if the file does not exist or is readable.

file_writable_ok( FILENAME [, NAME ] )

file_writeable_ok( FILENAME [, NAME ] )

Ok if the file exists and is writable, not ok if the file does not exist or is not writable.

The original name is "file_writeable_ok" with that extra e. That still works but there's a function with the correct spelling too.

file_not_writeable_ok( FILENAME [, NAME ] )

file_not_writable_ok( FILENAME [, NAME ] )

Ok if the file exists and is not writable, not ok if the file does not exist or is writable.

The original name is "file_not_writeable_ok" with that extra e. That still works but there's a function with the correct spelling too.

file_executable_ok( FILENAME [, NAME ] )

Ok if the file exists and is executable, not ok if the file does not exist or is not executable.

This test automatically skips if it thinks it is on a Windows platform.

file_not_executable_ok( FILENAME [, NAME ] )

Ok if the file exists and is not executable, not ok if the file does not exist or is executable.

This test automatically skips if it thinks it is on a Windows platform.

file_mode_is( FILENAME, MODE [, NAME ] )

Ok if the file exists and the mode matches, not ok if the file does not exist or the mode does not match.

This test automatically skips if it thinks it is on a Windows platform.

Contributed by Shawn Sorichetti "<ssoriche@coloredblocks.net>"

file_mode_isnt( FILENAME, MODE [, NAME ] )

Ok if the file exists and mode does not match, not ok if the file does not exist or mode does match.

This test automatically skips if it thinks it is on a Windows platform.

Contributed by Shawn Sorichetti "<ssoriche@coloredblocks.net>"

file_mode_has( FILENAME, MODE [, NAME ] )

Ok if the file exists and has all the bits in mode turned on, not ok if the file does not exist or the mode does not match. That is, "FILEMODE & MODE == MODE" must be true.

This test automatically skips if it thinks it is on a Windows platform.

Contributed by Ricardo Signes "<rjbs@cpan.org>"

file_mode_hasnt( FILENAME, MODE [, NAME ] )

Ok if the file exists and has all the bits in mode turned off, not ok if the file does not exist or the mode does not match. That is, "FILEMODE & MODE == 0" must be true.

This test automatically skips if it thinks it is on a Windows platform.

Contributed by Ricardo Signes "<rjbs@cpan.org>"

file_is_symlink_ok( FILENAME [, NAME ] )

Ok if FILENAME is a symlink, even if it points to a non-existent file. This test automatically skips if the operating system does not support symlinks.

file_is_not_symlink_ok( FILENAME [, NAME ] )

Ok if FILENAME is a not symlink. This test automatically skips if the operating system does not support symlinks. If the file does not exist, the test fails.

symlink_target_exists_ok( SYMLINK [, TARGET] [, NAME ] )

Ok if FILENAME is a symlink and it points to a existing file. With the optional TARGET argument, the test fails if SYMLINK's target is not TARGET. This test automatically skips if the operating system does not support symlinks. If the file does not exist, the test fails.

symlink_target_dangles_ok( SYMLINK [, NAME ] )

Ok if FILENAME is a symlink and if it doesn't point to a existing file. This test automatically skips if the operating system does not support symlinks. If the file does not exist, the test fails.

symlink_target_is( SYMLINK, TARGET [, NAME ] )

Ok if FILENAME is a symlink and if points to TARGET. This test automatically skips if the operating system does not support symlinks. If the file does not exist, the test fails.

symlink_target_is_absolute_ok( SYMLINK [, NAME ] )

Ok if FILENAME is a symlink and if its target is an absolute path. This test automatically skips if the operating system does not support symlinks. If the file does not exist, the test fails.

dir_exists_ok( DIRECTORYNAME [, NAME ] )

Ok if the file exists and is a directory, not ok if the file doesn't exist, or exists but isn't a directory.

Contributed by Buddy Burden "<barefoot@cpan.org>".

dir_contains_ok( DIRECTORYNAME, FILENAME [, NAME ] )

Ok if the directory exists and contains the file, not ok if the directory doesn't exist, or exists but doesn't contain the file.

Contributed by Buddy Burden "<barefoot@cpan.org>".

link_count_is_ok( FILE, LINK_COUNT [, NAME ] )

Ok if the link count to FILE is LINK_COUNT. LINK_COUNT is interpreted as an integer. A LINK_COUNT that evaluates to 0 returns Ok if the file does not exist.

link_count_gt_ok( FILE, LINK_COUNT [, NAME ] )

Ok if the link count to FILE is greater than LINK_COUNT. LINK_COUNT is interpreted as an integer. A LINK_COUNT that evaluates to 0 returns Ok if the file has at least one link.

link_count_lt_ok( FILE, LINK_COUNT [, NAME ] )

Ok if the link count to FILE is less than LINK_COUNT. LINK_COUNT is interpreted as an integer. A LINK_COUNT that evaluates to 0 returns Ok if the file has at least one link.

owner_is( FILE , OWNER [, NAME ] )

Ok if FILE's owner is the same as OWNER. OWNER may be a text user name or a numeric userid. Test skips on Dos, and Mac OS <= 9. If the file does not exist, the test fails.

Contributed by Dylan Martin

owner_isnt( FILE, OWNER [, NAME ] )

Ok if FILE's owner is not the same as OWNER. OWNER may be a text user name or a numeric userid. Test skips on Dos and Mac OS <= 9. If the file does not exist, the test fails.

Contributed by Dylan Martin

group_is( FILE , GROUP [, NAME ] )

Ok if FILE's group is the same as GROUP. GROUP may be a text group name or a numeric group id. Test skips on Dos, Mac OS <= 9 and any other operating systems that do not support getpwuid() and friends. If the file does not exist, the test fails.

Contributed by Dylan Martin

group_isnt( FILE , GROUP [, NAME ] )

Ok if FILE's group is not the same as GROUP. GROUP may be a text group name or a numeric group id. Test skips on Dos, Mac OS <= 9 and any other operating systems that do not support getpwuid() and friends. If the file does not exist, the test fails.

Contributed by Dylan Martin

file_mtime_age_ok( FILE [, WITHIN_SECONDS ] [, NAME ] )

Ok if FILE's modified time is WITHIN_SECONDS inclusive of the system's current time. This test uses stat() to obtain the mtime. If the file does not exist the test returns failure. If stat() fails, the test is skipped.

file_mtime_gt_ok( FILE, UNIXTIME [, NAME ] )

Ok if FILE's mtime is > UNIXTIME. This test uses stat() to get the mtime. If stat() fails this test is skipped. If FILE does not exist, this test fails.

file_mtime_lt_ok( FILE, UNIXTIME, [, NAME ] )

Ok if FILE's modified time is < UNIXTIME. This test uses stat() to get the mtime. If stat() fails this test is skipped. If FILE does not exist, this test fails.