MANDOS-CTL(8) | Mandos Manual | MANDOS-CTL(8) |
mandos-ctl - Control or query the operation of the Mandos server
mandos-ctl [--verbose | -v
|--dump-json | -j] [--debug] [CLIENT...]
mandos-ctl {[--enable | -e
|--disable | -d]
[--bump-timeout | -b]
[--start-checker | --stop-checker]
[--checker COMMAND |
-c COMMAND]
[--timeout TIME |
-t TIME]
[--extended-timeout TIME]
[--interval TIME |
-i TIME]
[--approve-by-default
|--deny-by-default]
[--approval-delay TIME]
[--approval-duration TIME]
[--host STRING |
-H STRING]
[--secret FILENAME |
-s FILENAME]
[--approve | -A
|--deny | -D]}
[--debug] {--all | -a | CLIENT...}
mandos-ctl [--deny | -D] {--remove
| -r}
[--debug] {--all | -a | CLIENT...}
mandos-ctl {--is-enabled | -V} [--debug] CLIENT
mandos-ctl {--help | -h}
mandos-ctl {--version | -v}
mandos-ctl --check
mandos-ctl is a program to control or query the operation of the Mandos server mandos(8).
This program can be used to change client settings, approve or deny client requests, and to remove clients from the server.
The purpose of this is to enable remote and unattended rebooting of client host computer with an encrypted root file system. See the section called “OVERVIEW” for details.
--help, -h
--enable, -e
--disable, -d
--bump-timeout
--start-checker
--stop-checker
--remove, -r
--checker COMMAND, -c COMMAND
--timeout TIME, -t TIME
--extended-timeout TIME
--interval TIME, -i TIME
--approve-by-default, --deny-by-default
--approval-delay TIME
--approval-duration TIME
--host STRING, -H STRING
--secret FILENAME, -s FILENAME
--approve, -A
--deny, -D
--all, -a
--verbose, -v
--dump-json, -j
--is-enabled, -V
--debug
--check
This is part of the Mandos system for allowing computers to have encrypted root file systems and at the same time be capable of remote and/or unattended reboots. The computers run a small client program in the initial RAM disk environment which will communicate with a server over a network. All network communication is encrypted using TLS. The clients are identified by the server using a TLS key; each client has one unique to it. The server sends the clients an encrypted password. The encrypted password is decrypted by the clients using a separate OpenPGP key, and the password is then used to unlock the root file system, whereupon the computers can continue booting normally.
This program is a small utility to generate new OpenPGP keys for new Mandos clients, and to generate sections for inclusion in clients.conf on the server.
If the --is-enabled option is used, the exit status will be 0 only if the specified client is enabled.
Please report bugs to the Mandos development mailing list: <mandos-dev@recompile.se> (subscription required). Note that this list is public. The developers can be reached privately at <mandos@recompile.se> (OpenPGP key fingerprint 153A 37F1 0BBA 0435 987F 2C4A 7223 2973 CA34 C2C4 for encrypted mail).
To list all clients:
mandos-ctl
To list all settings for the clients named “foo1.example.org” and “foo2.example.org”:
mandos-ctl --verbose foo1.example.org foo2.example.org
To enable all clients:
mandos-ctl --enable --all
To change timeout and interval value for the clients named “foo1.example.org” and “foo2.example.org”:
mandos-ctl --timeout=PT5M --interval=PT1M foo1.example.org foo2.example.org
To approve all clients currently waiting for approval:
mandos-ctl --approve --all
This program must be permitted to access the Mandos server via the D-Bus interface. This normally requires the root user, but could be configured otherwise by reconfiguring the D-Bus server.
intro(8mandos), mandos(8), mandos-clients.conf(5), mandos-monitor(8)
Copyright © 2010-2019 Teddy Hogeborn, Björn
Påhlsson
This manual page is part of Mandos.
Mandos is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
Mandos is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with Mandos. If not, see http://www.gnu.org/licenses/.
2019-07-29 | Mandos 1.8.14 |