DOKK / manpages / debian 11 / mono-devel / sqlsharp.1.en
sqlsharp(1) General Commands Manual sqlsharp(1)

sqlsharp - Mono SQL Query command-line tool

sqlsharp [-f filename] [-o filename] [-s]

sqlsharp is a Mono SQL tool used for entering SQL queries to a database using Mono data providers.

The following options are supported:

-f filename
Output file to load SQL commands from.
-o filename
Output file to send results.
Silent mode.

The SQL tool accepts commands via its command line interface. Commands begin with a backslash followed by the command name.

Example:

	\open

Basically, there are five commands a user should know: \provider, \connectionstring, \open, \quit, and \help

To connect to a database, you need to do the following:

1. set your data provider via \provider

	Example:
		SQL# \provider mysql

2. set your connection string via \connectionstring

	Example:
		SQL# \connectionstring Database=test

3. open a connection to the database via \open

	Example:
		SQL# \open

These commands are used to setup the provider, connection string, and open/close the database connnection

Sets the Connection String 
Example:
	SQL# \ConnectionString Database=testdb
	or
	SQL# \cs Database=testdb
For more examples, see section CONNECTION STRING EXAMPLES.
Sets the Provider of the Data Source. For list of Providers, see section PROVIDERS. 
	
Example: to set the provider for MySQL:
	SQL# \provider mysql


           or
	SQL# \p mysql
		
Note: if you need to load an external provider in SQL#, 


      see the SQL# command \loadextprovider
List ADO.NET 2.0 Providers available 
Example:
	SQL# \ListProviders 
	   or
	SQL# \listp
Prompts you for building each connection parameter and builds the connection string and also allows you to enter a password wich does not echo. 
Example:
	SQL# \bcs
	ConnectionString Option: Data Source [] SQL# blazer
	ConnectionString Option: Persist Security Info [False] SQL# 
	ConnectionString Option: Integrated Security [False] SQL# 
	ConnectionString Option: User ID [] SQL# scott
	Password: *****
	ConnectionString Option: Enlist [False] SQL# 
	ConnectionString Option: Pooling [True] SQL# 
	ConnectionString Option: Min Pool Size [0] SQL# 
	ConnectionString Option: Max Pool Size [100] SQL# 
	ConnectionString Option: Unicode [False] SQL# 
	ConnectionString Option: Load Balance Timeout [0] SQL# 
	ConnectionString Option: Omit Oracle Connection Name [False] SQL# 
	ConnectionString is set.
ASSEMBLY CLASS to load an external provider. Use the complete name of its assembly and its Connection class. 
Example: to load the MySQL provider Mono.Data.MySql
	SQL# \loadextprovider Mono.Data.MySql Mono.Data.MySql.MySqlConnection
Opens a connection to the database 
Example:
	SQL# \open
Closes the connection to the database 
Example:
	SQL# \close
show default variables, such as, Provider and ConnectionString. 
Example:
	SQL# \defaults
Quit 
Example:
	SQL# \q

Commands to execute SQL statements

e execute SQL query (SELECT)

Example: to execute a query
	
	SQL# SELECT * FROM EMPLOYEE
	SQL# \e
Note: to get \e to automatically work after entering a query, put a


      semicolon ; at the end of the query.
	      
Example: to enter and exectue query at the same time
	SQL# SELECT * FROM EMPLOYEE;
execute a SQL non query (not a SELECT) 
Example: to insert a row into a table:
	
	SQL# INSERT INTO SOMETABLE (COL1, COL2) VALUES('ABC','DEF')
	SQL# \exenonquery
		
Note: this can be used for those providers that are new and do not have


      the ability to execute queries yet.
execute SQL to get a single row and single column. 
Example: to execute a Maxium aggregate
		SQL# SELECT MAX(grade) FROM class
		SQL# \exescalar
FILENAME to execute SQL and save output to XML file 
Example: 
	SQL# SELECT fname, lname, hire_date FROM employee
	SQL# \exexml employee.xml
		
Note: this depends on DataAdapter, DataTable, and DataSet


      to be working properly

Commands for importing commands from file to SQL# and vice versa

FILENAME to read a batch of SQL# commands from file 
Example:
	SQL# \f batch.sql#
		
Note: the SQL# commands are interpreted as they are read.  If there is


      any SQL statements, the are executed.
FILENAME to write result of commands executed to file. 
Example:
	SQL# \o result.txt
FILENAME to load from file SQL commands into SQL buffer. 
Example:
	SQL# \load commands.sql
FILENAME to save SQL commands from SQL buffer to file. 

Example:
	SQL# \save commands.sql

General commands to use.

show help (all commands). 
Example:
	SQL# \h
TRUE, FALSE to silent messages. 
Example 1:
	SQL# \s true
		
Example 2:
	SQL# \s false
reset or clear the query buffer. 
Example:
	SQL# \r
show what's in the SQL buffer now. 
Example:
	SQL# \print
SH VARIABLES WHICH CAN BE USED AS PARAMETERS Commands to set variables which can be used as Parameters in an SQL statement. If the SQL contains any parameters, the parameter does not have a variable set, the user will be prompted for the value for each missing parameter.
NAME VALUE to set an internal variable. 
Example:
	SQL# \set sFirstName John
NAME to remove an internal variable. 
Example:
	SQL# \unset sFirstName
NAME to display the value of an internal variable. 
Example:
	SQL# \variable sFirstName

Enable or Disble support for a particular provider option

TRUE,FALSE to use parameters when executing SQL which use the variables that were set.

If this option is true, the SQL contains parameters, and for each parameter which does not have a SQL# variable set, the user will be prompted to enter the value For that parameter.

Example:
	SQL# \useparameter true

Default: false

TRUE,FALSE to use simple reader when displaying results. 
Example:
	SQL# \usesimplereader true

Default: false. Mostly, this is dependent on the provider. If the provider does not have enough of IDataReader implemented to have the normal reader working, then the simple reader can be used. Providers like SqlClient, MySQL, and PostgreSQL have this ption defaulting to true.

PROVIDER   NAME          NAMESPACE                  ASSEMBLY
oracle     Oracle 8i-11g System.Data.OracleClient   System.Data.OracleClient
postgresql NetPostgreSQL Npgsql                     Npgsql
bytefx     ByteFX MySQL  ByteFX.Data.MySqlClient    ByteFX.Data
sqlclient  MS SQL 7-2008 System.Data.SqlClient      System.Data
odbc       ODBC          System.Data.Odbc           System.Data
sqlite     SQL Lite      Mono.Data.SqliteClient     Mono.Data.SqliteClient
sybase     Sybase        Mono.Data.SybaseClient     Mono.Data.SybaseClient
firebird   Firebird SQL  FirebirdSql.Data.FirebirdSql FirebirdSql.Data.Firebird
mysql      MySQL AB      MySql.Data.MySqlClient     MySql.Data
NOTES:
Ngsql is the .Net Data Provider for PosgreSQL.  The
latest version can be downloaded from
http://npgsql.projects.postgresql.org/
MySql.Data is the MySQL Connector/Net for connecting to MySql databases.
For MySQL, it is strongly recommend to use MySql.Data instead of the old
ByteFX.Data provider.  Unfortunately, MySql.Data is not included with Mono.
You can download the latest MySQL Connector/Net from MySQL AB at
http://dev.mysql.com/downloads/
FirebirdSql.Data.Firebird can be downloaded from here:
http://www.firebirdsql.org/index.php?op=files&id=netprovider

Example connection strings for various providers to be used via the command \ConnectionString

Example of usage:
	\connectionstring Database=testdb
Connection String examples:
Microsoft SQL Server via System.Data.SqlClient 
	Server=DANPC;Database=pubs;User ID=saPassword=;
	For Integrated Security, bear in mind that Mono is not
	integrated with Windows, SQL Server client nor server, nor
	Windows Server.  Therefore, you must provide the Windows Domain
	name and domain user name and password for this user.
	Server=DANPC;Database=pubs;User ID=DOMAINser;Password=pass;Integrated Security=SSPI
	For a server locally, you can use localhost.
	
ODBC via System.Data.Odbc provider using 
a DSN named "MSSQLDSN"	I set up 
in the Windows control panel's ODBC Data Sources 
which connects to Microsoft SQL Server 2000:
	DSN=MSSQLDSN;UID=danmorg;PWD=freetds
To use ODBC ON Unix, consider unixODBC from http://www.unixodbc.org/
or use iODBC from http://www.iodbc.org/
SQL Lite via Mono.Data.SqliteClient 
provider which connects to the
database file SqliteTest.db; if not found, 
the file is created:
	URI=file:SqliteTest.db
Oracle via System.Data.OracleClient
	Data Source=testdb;User ID=scott;Password=tiger


        If you prefer to not use a tnsnames.ora file, you can 
	use a connection string which allows a
	TNS network description that is parentheses delimited
	like the following which has the host, port, and
	service name.  For host, you can specify an IP address


        instead of a hostname.
User ID=SCOTT;
Password=TIGER;
Data Source=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.101)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=TESTDB)))
		
Npgsql (.NET PostgreSQL) from 
http://gborg.postgresql.org/project/npgsql/projdisplay.php
	Server=localhost;Database=test;User ID=postgres;Password=fun2db
		
ByteFX (ByteFX MySQL) from 
	Please use MySql.Data instead.
	Server=localhost;Database=test;User ID=mysql;Password=
FirebirdSql via FirebirdSql.Data.Firebird (download latest form FirebirdSql.org)
	Database=C:\FIREBIRD\EXAMPLES\EMPLOYEE.FDB;User=SYSDBA;Password=masterkey;Dialect=3;Server=localhost
MySQL via (MySql.Data) MySQL Connector/Net from http://www.mysql.com/
	Server=localhost;Database=test;User ID=mysql;Password=mypass;Pooling=false

No support for tracing right now.

The Mono SQL Query Tool was written

by Daniel Morgan <monodanmorg@yahoo.com>

The Mono SQL Query Tool is released under the terms of the GNU GPL. Please read the accompanying `COPYING' file for details. Alternative licenses are available from Novell or Daniel Morgan.

To report bugs in the compiler, you can file bug reports in our bug tracking system:

https://github.com/mono/mono/issues

For details, visit:

http://lists.ximian.com/mailman/listinfo/mono-devel-list

For details, visit:

http://www.mono-project.com

mono(1)

9 September 2008