DOKK / manpages / debian 11 / mstflint / mstfwtrace.1.en
MSTFWTRACE,(1) User Commands MSTFWTRACE,(1)

mstfwtrace - Extracts and prints trace messages generated by the firmware of 5th generation devices

usage: mstfwtrace -d|--device DEVICE [options]

show this help message and exit
Print tool version.

PCI device name
Tracer mode [MEM]
Print real timestamps in [hh:mm:ss:nsec]
Ignore collecting old events

Irisc name [all]
Run in streaming mode
Trace class mask, use "+" to enable multiple classes or use integer format, e.g: -m class1+class2+... or 0xff00ff00
Trace level

Device Specific Info: ====================

ConnectIB: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
SwitchIB: Trace classes:
class1, class2
ConnectX4: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
ConnectX5: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
BlueField: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
ConnectX6: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
ConnectX6DX: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
Spectrum: Trace classes:
class1, class2
ConnectX4LX: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
SwitchIB2: Trace classes:
class1, class2
Quantum: Trace classes:
class1, class2
Spectrum2: Trace classes:
class1, class2

The full documentation for mstfwtrace, is maintained as a Texinfo manual. If the info and mstfwtrace, programs are properly installed at your site, the command

info mstfwtrace,

should give you access to the complete manual.

March 2020 mstfwtrace, mstflint 4.14.0, built on Mar 03 2020, 14:01:10. Git SHA Hash: N/A