DOKK / manpages / debian 11 / myproxy / myproxy-get-delegation.1.en
myproxy-logon(1) MyProxy myproxy-logon(1)

myproxy-logon - retrieve a credential

myproxy-logon [ options ]

myproxy-get-delegation [ options ]

The myproxy-logon command retrieves a proxy credential from the myproxy-server(8) that was previously stored using myproxy-init(1) or myproxy-store(1). It can also be used to retrieve short-lived end entity credentials from a myproxy-server(8) configured to act as a Certificate Authority. In the default mode, the command prompts for the MyProxy pass phrase associated with the credential to be retrieved and stores the retrieved credential in the location specified by the X509_USER_PROXY environment variable or /tmp/x509up_u<uid> if that environment variable is not set.

The myproxy-logon command is also available under the name myproxy-get-delegation for backward compatibility.

Displays command usage text and exits.
Displays command usage text and exits.
Enables verbose debugging output to the terminal.
Displays version information and exits.
Specifies the hostname(s) of the myproxy-server(s). Multiple hostnames, each hostname optionally followed by a ':' and port number, may be specified in a comma-separated list. This option is required if the MYPROXY_SERVER environment variable is not defined. If specified, this option overrides the MYPROXY_SERVER environment variable. If a port number is specified with a hostname, it will override the -p option as well as the MYPROXY_SERVER_PORT environment variable for that host.
Specifies the TCP port number of the myproxy-server(8). Default: 7512
Specifies the MyProxy account under which the credential to retrieve is stored. By default, the command uses the value of the LOGNAME environment variable. Use this option to specify a different account username on the MyProxy server. The MyProxy username need not correspond to a real Unix username.
Use the certificate subject (DN) as the default username, instead of the LOGNAME environment variable. When used with the -a option, the certificate subject of the authorization credential is used. Otherwise, the certificate subject of the default credential is used.
Specifies the lifetime of credentials retrieved from the myproxy-server(8) using the stored credential. The resulting lifetime is the shorter of the requested lifetime and the lifetime specified when the credential was stored using myproxy-init(1). Default: 12 hours
Specifies where the retrieved proxy credential should be stored. If this option is not specified, the proxy credential will be stored in the location specified by the X509_USER_PROXY environment variable or /tmp/x509up_u<uid> if that environment variable is not set. To write the credential to the command's standard output rather than to a file, use -o -.
Use this option to specify an existing, valid credential that you want to renew. Renewing a credential generally requires two certificate-based authentications. The client authenticates with its identity, using the credential in the standard location or specified by the X509_USER_PROXY or X509_USER_CERT and X509_USER_KEY environment variables in addition to authenticating with the existing credential, in the location specified by this option, that it wants to renew.
Specifies the name of the credential that is to be retrieved or renewed.
By default, the command prompts for a passphrase and reads the passphrase from the active tty. When running the command non-interactively, there may be no associated tty. Specifying this option tells the command to read passphrases from standard input without prompts or confirmation.
Don't prompt for a credential passphrase. Use other methods for authentication, such as Kerberos ticket or X.509 certificate. This option is implied by -a since passphrase authentication is not used for credential renewal.
Retrieve CA certificates directory from server (if available) to store in the location specified by the X509_CERT_DIR environment variable if set or /etc/grid-security/certificates if running as root or ~/.globus/certificates if running as non-root.
Unless this option is specified, then if the X509_CERT_DIR exists and the CA that signed the myproxy-server(8) certificate is not trusted, myproxy-logon will fail with an error, to protect against man-in-the-middle attacks. If, however, this option is specified, myproxy-logon will accept the CA to bootstrap trust. This option implies -T.
Only write output messages on error.
Authenticate only. Don't retrieve credentials.
Add VOMS attributes to the credential by running voms-proxy-init on the client-side after retrieving the credential from the myproxy-server(8). The VOMS VO name must be provided, as required by voms-proxy-init -voms. The voms-proxy-init command must also be installed and configured to use this option. For example, the VOMS_USERCONF environment variable may need to be set for voms-proxy-init to run correctly.
Specify the path to a PEM formatted certificate request to use when requesting a certificate from the myproxy-server(8), rather than allowing myproxy-logon to generate the private key and certificate request itself. In this case, myproxy-logon will not output a private key but will only output the signed certificate and (as needed) certificate chain. To read the certificate request from standard input rather than from a file, use -Q -.

0 on success, >0 on error

This client will, by default, perform a reverse-DNS lookup to determine the FQHN (Fully Qualified Host Name) to use in verifying the identity of the server by checking the FQHN against the CN in server's certificate. Setting this variable to STRICT_RFC2818 will cause the reverse-DNS lookup to NOT be performed and the user-specified name to be used instead. This variable setting will be ignored if MYPROXY_SERVER_DN (described later) is set.
Specifies the hostname(s) where the myproxy-server(8) is running. Multiple hostnames can be specified in a comma separated list with each hostname optionally followed by a ':' and port number. This environment variable can be used in place of the -s option.
Specifies the port where the myproxy-server(8) is running. This environment variable can be used in place of the -p option.
Specifies the distinguished name (DN) of the myproxy-server(8). All MyProxy client programs authenticate the server's identity. By default, MyProxy servers run with host credentials, so the MyProxy client programs expect the server to have a distinguished name with "/CN=host/<fqhn>" or "/CN=myproxy/<fqhn>" or "/CN=<fqhn>" (where <fqhn> is the fully-qualified hostname of the server). If the server is running with some other DN, you can set this environment variable to tell the MyProxy clients to accept the alternative DN. Also see GLOBUS_GSSAPI_NAME_COMPATIBILITY above.
Specifies a range of valid port numbers in the form "min,max" for the client side of the network connection to the server. By default, the client will bind to any available port. Use this environment variable to restrict the ports used to a range allowed by your firewall. If unset, MyProxy will follow the setting of the GLOBUS_TCP_PORT_RANGE environment variable.
Specifies a non-standard location for the certificate to be used for authentication to the myproxy-server(8).
Specifies a non-standard location for the private key to be used for authentication to the myproxy-server(8).
Specifies a non-standard location for the proxy credential to be used for authentication to the myproxy-server(8). Also specifies the output location for the proxy credential to be retrieved from the myproxy-server(8) unless the -o option is given.
Specifies a non-standard location for the CA certificates directory.
Specifies the size for RSA keys generated by MyProxy. By default, MyProxy generates 2048 bit RSA keys. Set this environment variable to "1024" for 1024 bit RSA keys.

See http://grid.ncsa.illinois.edu/myproxy/about for the list of MyProxy authors.

myproxy-change-pass-phrase(1), myproxy-destroy(1), myproxy-get-trustroots(1), myproxy-info(1), myproxy-init(1), myproxy-retrieve(1), myproxy-server.config(5), myproxy-store(1), myproxy-admin-adduser(8), myproxy-admin-change-pass(8), myproxy-admin-load-credential(8), myproxy-admin-query(8), myproxy-server(8)

2010-09-09 MyProxy