| nbdkit-nbd-plugin(1) | NBDKIT | nbdkit-nbd-plugin(1) |
nbdkit-nbd-plugin - proxy / forward to another NBD server
nbdkit nbd { command=COMMAND [arg=ARG [...]] |
hostname=HOST [port=PORT] |
vhost-cid=CID [port=PORT] |
socket=SOCKNAME |
socket-fd=FD |
[uri=]URI }
[dynamic-export=BOOL] [export=NAME] [retry=N] [shared=BOOL]
[tls=MODE] [tls-certificates=DIR] [tls-verify=BOOL]
[tls-username=NAME] [tls-psk=FILE]
"nbdkit-nbd-plugin" is a plugin for nbdkit(1) that lets you forward the connection to another NBD server. There are several uses for this plugin:
One of socket, hostname (optionally with port), vsock (optionally with port), uri, socket-fd or command must be given to specify which NBD server to forward to:
Run an NBD server, usually qemu-nbd(8), as an external command. See "EXAMPLES" below.
"COMMAND" is the program to run, followed by zero or more "arg=ARG" parameters for each argument. For example:
nbdkit nbd command=qemu-nbd arg=-f arg=qcow2 arg=$PWD/disk.qcow2
would run the command "qemu-nbd -f qcow2 $PWD/disk.qcow2". Because nbdkit may change directory before running the command, you may need to ensure that all file paths used in parameters (like the disk name above) are absolute paths.
This uses the libnbd API nbd_connect_systemd_socket_activation(3). This option implies "shared=true".
Connect to the NBD server at the remote "HOST" using a TCP socket. The optional port parameter overrides the default port (10809), and may be a 16-bit number or a non-numeric string to look up the well-known port for a service name.
Connect to the NBD server at the given vsock "CID" (for example, in a guest VM, using the cid 2 will connect to a server in the host). The optional port parameter overrides the default port (10809), and must be a 32-bit number. This only works for platforms with the "AF_VSOCK" family of sockets and libnbd new enough to use it; "nbdkit --dump-plugin nbd" will contain "libnbd_vsock=1" if this is the case. For more details on AF_VSOCK, see "AF_VSOCK" in nbdkit-service(1).
Connect to the NBD server over a socket file descriptor inherited by nbdkit. This uses the libnbd API nbd_connect_socket(3). This option implies "shared=true".
When "uri" is supplied, decode "URI" to determine the address to connect to. A URI can specify a TCP connection (such as "nbd://localhost:10809/export"), a Unix socket (such as "nbd+unix:///export?socket=/path/to/sock"), or a vsock connection (such as "nbd+vsock:///2:10809/export"). Remember you may need to quote the parameter to protect it from the shell.
The "uri" parameter is only available when the plugin was compiled against libnbd with URI support; "nbdkit --dump-plugin nbd" will contain "libnbd_uri=1" if this is the case.
The export portion of the URI is ignored when using "dynamic-export=true".
"uri=" is a magic config key and may be omitted in most cases. See "Magic parameters" in nbdkit(1).
Other parameters control the NBD connection:
If the initial connection attempt to the server fails, retry up to "N" times more after a one-second delay between tries (default 0).
If using "command" or "socket-fd" modes then this defaults to true, otherwise false.
If false the plugin will open a new connection to the server for each client making a connection to nbdkit. The remote server does not have to be started until immediately before the first nbdkit client connects.
If this parameter is set to "true", the plugin will open a single connection to the server when nbdkit is first started (the "retry" parameter may be necessary to coordinate timing of the remote server startup), and all clients to nbdkit will share that single connection. This mode is incompatible with dynamic-export=true.
This parameter defaults to false, in which case all clients to nbdkit use the same export of the server, as set by "export" or "uri", regardless of the client's export name request. If it is set to true, nbdkit will pass the client's requested export name over to the final NBD server, which means clients requesting different export names can see different content when the server differentiates content by export name. Dynamic exports prevent the use of "shared" mode, and thus are not usable with "command" or "socket-fd".
If libnbd is new enough, dynamic export mode is able to advertise the same exports as listed by the server; "nbdkit --dump-plugin nbd" will contain "libnbd_dynamic_list=1" if this is the case. Regardless of what this plugin lists, it is also possible to use nbdkit-exportname-filter(1) to adjust what export names the client sees or uses as a default.
Selects which TLS mode to use with the server. If no other tls option is present, this defaults to "off", where the client does not attempt encryption (and may be rejected by a server that requires it). If omitted but another tls option is present, this defaults to "on", where the client opportunistically attempts a TLS handshake, but will continue running unencrypted if the server does not support encryption. If set to "require" or if the "uri" parameter is used with a scheme that requires encryption (such as "nbds://host"), then this requires an encrypted connection to the server.
The "tls" parameter is only available when the plugin was compiled against libnbd with TLS support; "nbdkit --dump-plugin nbd" will contain "libnbd_tls=1" if this is the case. Note the difference between "--tls=..." controlling what nbdkit serves, and "tls=..." controlling what the nbd plugin connects to as a client.
This specifies the directory containing X.509 client certificates to present to the server.
Setting this parameter to false disables server name verification, which opens you to potential Man-in-the-Middle (MITM) attacks, but allows for a simpler setup for distributing certificates.
If provided, this overrides the user name to present to the server alongside the certificate.
If provided, this is the filename containing the Pre-Shared Keys (PSK) to present to the server. While this is easier to set up than X.509, it requires that the PSK file be transmitted over a secure channel.
Expose the contents of an export served by an old style server over a Unix socket to TCP network clients that only want to consume encrypted data. Use --exit-with-parent to clean up nbdkit at the same time that the old server exits.
( sock=`mktemp -u` nbdkit --exit-with-parent --tls=require nbd socket=$sock & exec /path/to/oldserver --socket=$sock ) ┌────────────┐ TLS ┌────────┐ plaintext ┌────────────┐ │ new client │ ────────▶│ nbdkit │ ───────────▶│ old server │ └────────────┘ TCP └────────┘ Unix └────────────┘
Run qemu-nbd as the server, allowing you to read and write qcow2 files (since nbdkit does not have a native qcow2 plugin). This allows you to use nbdkit filters on top, see the next example.
nbdkit nbd command=qemu-nbd arg=-f arg=qcow2 arg=/path/to/image.qcow2
qemu-nbd is cleaned up when nbdkit exits.
Combine nbdkit-partition-filter(1) with qemu-nbd(8)’s ability to visit qcow2 files:
nbdkit --filter=partition nbd \
command=qemu-nbd arg=-f arg=qcow2 arg=/path/to/image.qcow2 \
partition=1
This performs the same task as the deprecated qemu-nbd -P option:
qemu-nbd -P 1 -f qcow2 /path/to/image.qcow2
Expose the contents of export "foo" from a newstyle server with encrypted data to a client that can only consume unencrypted old style. Use --run to clean up nbdkit at the time the client exits. In general, note that it is best to keep the plaintext connection limited to a Unix socket on the local machine.
nbdkit -U - -o --tls=off nbd hostname=example.com export=foo tls=require \ --run '/path/to/oldclient --socket=$unixsocket' ┌────────────┐ plaintext ┌────────┐ TLS ┌────────────┐ │ old client │ ───────────▶│ nbdkit │ ────────▶│ new server │ └────────────┘ Unix └────────┘ TCP └────────────┘
You can learn which features are provided by libnbd by inspecting the "libnbd_*" lines in --dump-plugin output:
$ nbdkit --dump-plugin nbd [...] libnbd_version=1.2.3 libnbd_tls=1 libnbd_uri=1
Use "nbdkit --dump-config" to find the location of $plugindir.
"nbdkit-nbd-plugin" first appeared in nbdkit 1.2.
nbdkit(1), nbdkit-captive(1), nbdkit-filter(3), nbdkit-exportname-filter(1), nbdkit-tls(1), nbdkit-plugin(3), libnbd(3), qemu-nbd(8).
Eric Blake
Copyright (C) 2017, 2019 Red Hat Inc.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
| 2021-01-20 | nbdkit-1.24.1 |