NAME

nmrpflash -- firmware flash utility for Netgear devices

USAGE

nmrpflash [OPTION...]

OPTIONS

-i, and -f or -c are mandatory

-a ipaddr

IP address to assign to target device

-A ipaddr

IP address to assign to selected interface

-B

Blind mode (don't wait for response packets)

-c command

Command to run before (or instead of) TFTP upload

-f firmware

Firmware file

-F filename

Remote filename to use during TFTP upload

-i interface

Network interface directly connected to device

-m mac

MAC address of target device (xx:xx:xx:xx:xx:xx)

-M netmask

Subnet mask to assign to target device

-t timeout

Timeout (in milliseconds) for NMRP packets

-T timeout

Time (seconds) to wait after successful TFTP upload

-p port

Port to use for TFTP upload

-R region

Set device region (NA, WW, GR, PR, RU, BZ, IN, KO, JP)

-v

Be verbose

-V

Print version and exit

-L

List network interfaces

-h

Show this screen

EXAMPLES

(run as root)

 # nmrpflash -i eth0 -f firmware.bin

When using -c, the environment variables IP, PORT, NETMASK and MAC are set to the device IP address, TFTP port, subnet mask and MAC address, respectively.

COPYRIGHT & LICENSE

nmrpflash Copyright (C) 2016 Joseph C. Lehner

nmrpflash is free software, licensed under the GNU GPLv3. Source code at <https://github.com/jclehner/nmrpflash>

This documentation was created by Damyan Ivanov dmn@debian.org from the "nmrpflash" help text. Licensed under the same terms as the upstream source code.