| NUMATOP(8) | System Manager's Manual | NUMATOP(8) |
numatop - a tool for memory access locality characterization and analysis.
numatop [-s] [-l] [-f] [-d]
numatop [-h]
This manual page briefly documents the numatop command.
Most modern systems use a Non-Uniform Memory Access (NUMA) design for multiprocessing. In NUMA systems, memory and processors are organized in such a way that some parts of memory are closer to a given processor, while other parts are farther from it. A processor can access memory that is closer to it much faster than the memory that is farther from it. Hence, the latency between the processors and different portions of the memory in a NUMA machine may be significantly different.
numatop is an observation tool for runtime memory locality characterization and analysis of processes and threads running on a NUMA system. It helps the user to characterize the NUMA behavior of processes and threads and to identify where the NUMA-related performance bottlenecks reside. The tool uses hardware performance counter sampling technologies and associates the performance data with Linux system runtime information to provide real-time analysis in production systems. The tool can be used to:
A) Characterize the locality of all running processes and threads to identify those with the poorest locality in the system.
B) Identify the "hot" memory areas, report average memory access latency, and provide the location where accessed memory is allocated. A "hot" memory area is where process/thread(s) accesses are most frequent. numatop has a metric called "ACCESS%" that specifies what percentage of memory accesses are attributable to each memory area.
Note: numatop records only the memory accesses which have latencies greater than a predefined threshold (128 CPU cycles).
C) Provide the call-chain(s) in the process/thread code that accesses a given hot memory area.
D) Provide the call-chain(s) when the process/thread generates certain counter events (RMA/LMA/IR/CYCLE). The call-chain(s) helps to locate the source code that generates the events.
RMA: Remote Memory Access.
LMA: Local Memory Access.
IR: Instruction Retired.
CYCLE: CPU cycles.
E) Provide per-node statistics for memory and CPU utilization. A node is: a region of memory in which every byte has the same distance from each CPU.
F) Show, using a user-friendly interface, the list of processes/threads sorted by some metrics (by default, sorted by CPU utilization), with the top process having the highest CPU utilization in the system and the bottom one having the lowest CPU utilization. Users can also use hotkeys to resort the output by these metrics: RMA, LMA, RMA/LMA, CPI, and CPU%.
RMA/LMA: ratio of RMA/LMA.
CPI: CPU cycle per instruction.
CPU%: CPU utilization.
numatop is a GUI tool that periodically tracks and analyzes the NUMA activity of processes and threads and displays useful metrics. Users can scroll up/down by using the up or down key to navigate in the current window and can use several hot keys shown at the bottom of the window, to switch between windows or to change the running state of the tool. For example, hotkey 'R' refreshes the data in the current window.
Below is a detailed description of the various display windows and the data items that they display:
[WIN1 - Monitoring processes and threads]:
Get the locality characterization of all processes. This is the first window
upon startup, it's numatop's "Home" window. This window displays a
list of processes. The top process has the highest system CPU utilization
(CPU%), while the bottom process has the lowest CPU% in the system.
Generally, the memory-intensive process is also CPU-intensive, so the
processes shown in this window are sorted by CPU% by default. The user can
press hotkeys '1', '2', '3', '4', or '5' to resort the output by
"RMA", "LMA", "RMA/LMA", "CPI", or
"CPU%".
[KEY METRICS]:
RMA(K): number of Remote Memory Access (unit is 1000).
RMA(K) = RMA / 1000;
LMA(K): number of Local Memory Access (unit is 1000).
LMA(K) = LMA / 1000;
RMA/LMA: ratio of RMA/LMA.
CPI: CPU cycles per instruction.
CPU%: system CPU utilization (busy time across all CPUs).
[HOTKEY]:
Q: Quit the application.
H: WIN1 refresh.
R: Refresh to show the latest data.
I: Switch to WIN2 to show the normalized data.
N: Switch to WIN11 to show the per-node statistics.
1: Sort by RMA.
2: Sort by LMA.
3: Sort by RMA/LMA.
4: Sort by CPI.
5: Sort by CPU%
[WIN2 - Monitoring processes and threads (normalized)]:
Get the normalized locality characterization of all processes.
[KEY METRICS]:
RPI(K): RMA normalized by 1000 instructions.
RPI(K) = RMA / (IR / 1000);
LPI(K): LMA normalized by 1000 instructions.
LPI(K) = LMA / (IR / 1000);
Other metrics remain the same.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
N: Switch to WIN11 to show the per-node statistics.
1: Sort by RPI.
2: Sort by LPI.
3: Sort by RMA/LMA.
4: Sort by CPI.
5: Sort by CPU%
[WIN3 - Monitoring the process]:
Get the locality characterization with node affinity of a specified
process.
[KEY METRICS]:
NODE: the node ID.
CPU%: per-node CPU utilization.
Other metrics remain the same.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
N: Switch to WIN11 to show the per-node statistics.
L: Show the latency information.
C: Show the call-chain.
[WIN4 - Monitoring all threads]:
Get the locality characterization of all threads in a specified process.
[KEY METRICS]:
CPU%: per-CPU CPU utilization.
Other metrics remain the same.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
N: Switch to WIN11 to show the per-node statistics.
[WIN5 - Monitoring the thread]:
Get the locality characterization with node affinity of a specified
thread.
[KEY METRICS]:
CPU%: per-CPU CPU utilization.
Other metrics remain the same.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
N: Switch to WIN11 to show the per-node statistics.
L: Show the latency information.
C: Show the call-chain.
[WIN6 - Monitoring memory areas]:
Get the memory area use with the associated accessing latency of a specified
process/thread.
[KEY METRICS]:
ADDR: starting address of the memory area.
SIZE: size of memory area (K/M/G bytes).
ACCESS%: percentage of memory accesses are to this memory area.
LAT(ns): the average latency (nanoseconds) of memory accesses.
DESC: description of memory area (from /proc/<pid>/maps).
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
A: Show the memory access node distribution.
C: Show the call-chain when process/thread accesses the memory area.
[WIN7 - Memory access node distribution overview]:
Get the percentage of memory accesses originated from the process/thread to
each node.
[KEY METRICS]:
NODE: the node ID.
ACCESS%: percentage of memory accesses are to this node.
LAT(ns): the average latency (nanoseconds) of memory accesses to this
node.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
[WIN8 - Break down the memory area into physical memory on
node]:
Break down the memory area into the physical mapping on node with the
associated accessing latency of a process/thread.
[KEY METRICS]:
NODE: the node ID.
Other metrics remain the same.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
[WIN9 - Call-chain when process/thread generates the event
("RMA"/"LMA"/"CYCLE"/"IR")]:
Determine the call-chains to the code that generates
"RMA"/"LMA"/"CYCLE"/"IR".
[KEY METRICS]:
Call-chain list: a list of call-chains.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to the previous window.
R: Refresh to show the latest data.
1: Locate call-chain when process/thread generates "RMA"
2: Locate call-chain when process/thread generates "LMA"
3: Locate call-chain when process/thread generates "CYCLE" (CPU
cycle)
4: Locate call-chain when process/thread generates "IR" (Instruction
Retired)
[WIN10 - Call-chain when process/thread access the memory
area]:
Determine the call-chains to the code that references this memory area. The
latency must be greater than the predefined latency threshold (128 CPU
cycles).
[KEY METRICS]:
Call-chain list: a list of call-chains.
Other metrics remain the same.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
[WIN11 - Node Overview]:
Show the basic per-node statistics for this system
[KEY METRICS]:
MEM.ALL: total usable RAM (physical RAM minus a few reserved bits and the
kernel binary code).
MEM.FREE: sum of LowFree + HighFree (overall stat) .
CPU%: per-node CPU utilization.
Other metrics remain the same.
[WIN12 - Information of Node N]:
Show the memory use and CPU utilization for the selected node.
[KEY METRICS]:
CPU: array of logical CPUs which belong to this node.
CPU%: per-node CPU utilization.
MEM active: the amount of memory that has been used more recently and is not
usually reclaimed unless absolute necessary.
MEM inactive: the amount of memory that has not been used for a while and is
eligible to be swapped to disk.
Dirty: the amount of memory waiting to be written back to the disk.
Writeback: the amount of memory actively being written back to the disk.
Mapped: all pages mapped into a process.
[HOTKEY]:
Q: Quit the application.
H: Switch to WIN1.
B: Back to previous window.
R: Refresh to show the latest data.
The following options are supported by numatop:
-s sampling_precision
normal: balance precision and overhead (default)
high: high sampling precision (high overhead)
low: low sampling precision, suitable for high load system
-l log_level
Specifies the level of logging in the log file. Valid values are:
1: unknown (reserved for future use)
2: all
-f log_file
Specifies the log file where output will be written. If the log file is not
writable, the tool will prompt "Cannot open '<file name>' for
writting.".
-d dump_file
Specifies the dump file where the screen data will be written. Generally the
dump file is used for automated test. If the dump file is not writable, the
tool will prompt "Cannot open <file name> for dump
writing."
-h
Displays the command's usage.
Example 1: Launch numatop with high sampling precision
numatop -s high
Example 2: Write all warning messages in /tmp/numatop.log
numatop -l 2 -o /tmp/numatop.log
Example 3: Dump screen data in /tmp/dump.log
numatop -d /tmp/dump.log
0: successful operation.
Other value: an error occurred.
You must have root privileges to run numatop.
Or set -1 in /proc/sys/kernel/perf_event_paranoid
Note: The perf_event_paranoid setting has security implications and a non-root user probably doesn't have authority to access /proc. It is highly recommended that the user runs numatop as root.
numatop requires a patch set to support PEBS Load Latency functionality in the kernel. The patch set has not been integrated in 3.8. Probably it will be integrated in 3.9. The following steps show how to get and apply the patch set.
1. git clone
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
2. cd tip
3. git checkout perf/x86
4. build kernel as usual
numatop supports the Intel Xeon processors: 5500-series, 6500/7500-series, 5600 series, E7-x8xx-series, and E5-16xx/24xx/26xx/46xx-series. Note: CPU microcode version 0x618 or 0x70c or later is required on E5-16xx/24xx/26xx/46xx-series. It also supports IBM Power8 and Power9 processors.
| April 3, 2013 |