| opaallanalysis(8) | IFSFFCLIRG (Man Page) | opaallanalysis(8) |
opaallanalysis
(All) opaallanalysis command performs the set of analysis specified in FF_ALL_ANALYSIS and can be specified for fabric, chassis, esm, or hostsm.
opaallanalysis [-b|-e] [-s] [-d dir] [-c file] [-t
portsfile]
[-p ports] [-F chassisfile] [-H 'chassis'] [-G
esmchassisfile]
[-E esmchassis] [-T topology_input]
Produces full help text.
Sets the baseline mode. Default is compare/check mode.
Evaluates health only. Default is compare/check mode.
Saves history of failures (errors/differences).
Identifies the top-level directory for saving baseline and history of failed checks. Default is /var/usr/lib/opa/analysis
Specifies the error thresholds configuration file. Default is /etc/opa/opamon.conf
Specifies the file with list of local HFI ports used to access fabric(s) for analysis. Default is /etc/opa/ports
Specifies the list of local HFI ports used to access fabric(s) for analysis. Default is the first active port. Specified as HFI:port as follows:
0:0 First active port in system.
0:y Port y within system.
x:0 First active port on HFI x.
x:y HFI x, port y.
Specifies the file with a chassis in a cluster. Default is /etc/opa/chassis
Specifies the list of chassis on which to execute the command.
Specifies the file with embedded SM chassis in the cluster. Default is /etc/opa/esm_chassis
Specifies the list of embedded SM chassis to analyze.
Specifies the name of topology input file to use. Any %P markers in this filename are replaced with the HFI:port being operated on, such as 0:0 or 1:2. Default is /etc/opa/topology.%P.xml. If -T NONE is specified, no topology input file is used. See opareport for more information.
opaallanalysis
opaallanalysis -p '1:1 2:1'
The following environment variables are also used by this command:
List of ports, used in absence of -t and -p.
File containing list of ports, used in absence of -t and -p.
File containing topology_input (may have %P marker in filename), used in absence of -T.
List of chassis, used if -F and -H options are not supplied.
File containing list of chassis, used if -F and -H options are not supplied.
List of SM chassis, used if -G and -E options are not supplied.
File containing list of SM chassis, used if -G and -E options are not supplied.
Top level directory for baselines and failed health checks.
List of commands to issue during analysis, unused if -e option supplied.
Single command to issue to check overall health during analysis, unused if -b option supplied
The opaallanalysis command performs the set of analysis specified in FF_ALL_ANALYSIS, which must be a space-separated list. This can be provided by the environment or using /etc/opa/opafastfabric.conf. The analysis set includes the options: fabric, chassis, esm, or hostsm. For a fabric with only externally managed switches, FF_ALL_ANALYSIS should be set to -fabric in opafastfabric.conf.
Note that the opaallanalysis command has options which are a super-set of the options for all other analysis commands. The options are passed along to the respective tools as needed. For example, the -c file option is passed on to opafabricanalysis if it is specified in FF_ALL_ANALYSIS.
The output files are all the output files for the FF_ALL_ANALYSIS selected set of analysis. See the previous sections for the specific output files.
| Intel Corporation | Copyright(C) 2015-2019 |