identity

  Signature: (n; [o]a(n,n))

Return an identity matrix of the specified size. If you hand in a scalar, its value is the size of the identity matrix; if you hand in a dimensioned PDL, the 0th dimension is the size of the matrix.

stretcher

  Signature: (a(n); [o]b(n,n))

  $mat = stretcher($eigenvalues);

Return a diagonal matrix with the specified diagonal elements

inv

  Signature: (a(m,m); sv opt )

  $a1 = inv($a, {$opt});

Invert a square matrix.

You feed in an NxN matrix in $a, and get back its inverse (if it exists). The code is inplace-aware, so you can get back the inverse in $a itself if you want -- though temporary storage is used either way. You can cache the LU decomposition in an output option variable.

"inv" uses "lu_decomp" by default; that is a numerically stable (pivoting) LU decomposition method.

OPTIONS:

• s

  Boolean value indicating whether to complain if the matrix is singular. If this is false, singular matrices cause inverse to barf. If it is true, then singular matrices cause inverse to return undef.

• lu (I/O)

  This value contains a list ref with the LU decomposition, permutation, and parity values for $a. If you do not mention the key, or if the value is undef, then inverse calls "lu_decomp". If the key exists with an undef value, then the output of "lu_decomp" is stashed here (unless the matrix is singular). If the value exists, then it is assumed to hold the LU decomposition.

• det (Output)

  If this key exists, then the determinant of $a get stored here, whether or not the matrix is singular.

det

  Signature: (a(m,m); sv opt)

  $det = det($a,{opt});

Determinant of a square matrix using LU decomposition (for large matrices)

You feed in a square matrix, you get back the determinant. Some options exist that allow you to cache the LU decomposition of the matrix (note that the LU decomposition is invalid if the determinant is zero!). The LU decomposition is cacheable, in case you want to re-use it. This method of determinant finding is more rapid than recursive-descent on large matrices, and if you reuse the LU decomposition it's essentially free.

OPTIONS:

•

lu (I/O)

Provides a cache for the LU decomposition of the matrix. If you provide the key but leave the value undefined, then the LU decomposition goes in here; if you put an LU decomposition here, it will be used and the matrix will not be decomposed again.

determinant

  Signature: (a(m,m))

  $det = determinant($x);

Determinant of a square matrix, using recursive descent (threadable).

This is the traditional, robust recursive determinant method taught in most linear algebra courses. It scales like "O(n!)" (and hence is pitifully slow for large matrices) but is very robust because no division is involved (hence no division-by-zero errors for singular matrices). It's also threadable, so you can find the determinants of a large collection of matrices all at once if you want.

Matrices up to 3x3 are handled by direct multiplication; larger matrices are handled by recursive descent to the 3x3 case.

The LU-decomposition method det is faster in isolation for single matrices larger than about 4x4, and is much faster if you end up reusing the LU decomposition of $a (NOTE: check performance and threading benchmarks with new code).

eigens_sym

  Signature: ([phys]a(m); [o,phys]ev(n,n); [o,phys]e(n))

Eigenvalues and -vectors of a symmetric square matrix. If passed an asymmetric matrix, the routine will warn and symmetrize it, by taking the average value. That is, it will solve for 0.5*($a+$a->mv(0,1)).

It's threadable, so if $a is 3x3x100, it's treated as 100 separate 3x3 matrices, and both $ev and $e get extra dimensions accordingly.

If called in scalar context it hands back only the eigenvalues. Ultimately, it should switch to a faster algorithm in this case (as discarding the eigenvectors is wasteful).

The algorithm used is due to J. vonNeumann, which was a rediscovery of Jacobi's Method <http://en.wikipedia.org/wiki/Jacobi_eigenvalue_algorithm> .

The eigenvectors are returned in COLUMNS of the returned PDL. That makes it slightly easier to access individual eigenvectors, since the 0th dim of the output PDL runs across the eigenvectors and the 1st dim runs across their components.

    ($ev,$e) = eigens_sym $x;  # Make eigenvector matrix
    $vector = $ev->($n);       # Select nth eigenvector as a column-vector
    $vector = $ev->(($n));     # Select nth eigenvector as a row-vector

    ($ev, $e) = eigens_sym($x); # e-vects & e-values
    $e = eigens_sym($x);        # just eigenvalues

eigens_sym ignores the bad-value flag of the input piddles. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

eigens

  Signature: ([phys]a(m); [o,phys]ev(l,n,n); [o,phys]e(l,n))

Real eigenvalues and -vectors of a real square matrix.

(See also "eigens_sym", for eigenvalues and -vectors of a real, symmetric, square matrix).

The eigens function will attempt to compute the eigenvalues and eigenvectors of a square matrix with real components. If the matrix is symmetric, the same underlying code as "eigens_sym" is used. If asymmetric, the eigenvalues and eigenvectors are computed with algorithms from the sslib library. If any imaginary components exist in the eigenvalues, the results are currently considered to be invalid, and such eigenvalues are returned as "NaN"s. This is true for eigenvectors also. That is if there are imaginary components to any of the values in the eigenvector, the eigenvalue and corresponding eigenvectors are all set to "NaN". Finally, if there are any repeated eigenvectors, they are replaced with all "NaN"s.

Use of the eigens function on asymmetric matrices should be considered experimental! For asymmetric matrices, nearly all observed matrices with real eigenvalues produce incorrect results, due to errors of the sslib algorithm. If your assymmetric matrix returns all NaNs, do not assume that the values are complex. Also, problems with memory access is known in this library.

Not all square matrices are diagonalizable. If you feed in a non-diagonalizable matrix, then one or more of the eigenvectors will be set to NaN, along with the corresponding eigenvalues.

"eigens" is threadable, so you can solve 100 eigenproblems by feeding in a 3x3x100 array. Both $ev and $e get extra dimensions accordingly.

If called in scalar context "eigens" hands back only the eigenvalues. This is somewhat wasteful, as it calculates the eigenvectors anyway.

The eigenvectors are returned in COLUMNS of the returned PDL (ie the the 0 dimension). That makes it slightly easier to access individual eigenvectors, since the 0th dim of the output PDL runs across the eigenvectors and the 1st dim runs across their components.

        ($ev,$e) = eigens $x;  # Make eigenvector matrix
        $vector = $ev->($n);   # Select nth eigenvector as a column-vector
        $vector = $ev->(($n)); # Select nth eigenvector as a row-vector

DEVEL NOTES:

For now, there is no distinction between a complex eigenvalue and an invalid eigenvalue, although the underlying code generates complex numbers. It might be useful to be able to return complex eigenvalues.

    ($ev, $e) = eigens($x); # e'vects & e'vals
    $e = eigens($x);        # just eigenvalues

eigens ignores the bad-value flag of the input piddles. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

svd

  Signature: (a(n,m); [o]u(n,m); [o,phys]z(n); [o]v(n,n))

 ($u, $s, $v) = svd($x);

Singular value decomposition of a matrix.

"svd" is threadable.

Given an m x n matrix $a that has m rows and n columns (m >= n), "svd" computes matrices $u and $v, and a vector of the singular values $s. Like most implementations, "svd" computes what is commonly referred to as the "thin SVD" of $a, such that $u is m x n, $v is n x n, and there are <=n singular values. As long as m >= n, the original matrix can be reconstructed as follows:

    ($u,$s,$v) = svd($x);
    $ess = zeroes($x->dim(0),$x->dim(0));
    $ess->slice("$_","$_").=$s->slice("$_") foreach (0..$x->dim(0)-1); #generic diagonal
    $a_copy = $u x $ess x $v->transpose;

If m==n, $u and $v can be thought of as rotation matrices that convert from the original matrix's singular coordinates to final coordinates, and from original coordinates to singular coordinates, respectively, and $ess is a diagonal scaling matrix.

If n>m, "svd" will barf. This can be avoided by passing in the transpose of $a, and reconstructing the original matrix like so:

    ($u,$s,$v) = svd($x->transpose);
    $ess = zeroes($x->dim(1),$x->dim(1));
    $ess->slice("$_","$_").=$s->slice("$_") foreach (0..$x->dim(1)-1); #generic diagonal
    $x_copy = $v x $ess x $u->transpose;

EXAMPLE

The computing literature has loads of examples of how to use SVD. Here's a trivial example (used in PDL::Transform::map) of how to make a matrix less, er, singular, without changing the orientation of the ellipsoid of transformation:

    { my($r1,$s,$r2) = svd $x;
      $s++;             # fatten all singular values
      $r2 *= $s;        # implicit threading for cheap mult.
      $x .= $r2 x $r1;  # a gets r2 x ess x r1
    }

svd ignores the bad-value flag of the input piddles. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

lu_decomp

  Signature: (a(m,m); [o]lu(m,m); [o]perm(m); [o]parity)

LU decompose a matrix, with row permutation

  ($lu, $perm, $parity) = lu_decomp($x);
  $lu = lu_decomp($x, $perm, $par);  # $perm and $par are outputs!
  lu_decomp($x->inplace,$perm,$par); # Everything in place.

"lu_decomp" returns an LU decomposition of a square matrix, using Crout's method with partial pivoting. It's ported from Numerical Recipes. The partial pivoting keeps it numerically stable but means a little more overhead from threading.

"lu_decomp" decomposes the input matrix into matrices L and U such that LU = A, L is a subdiagonal matrix, and U is a superdiagonal matrix. By convention, the diagonal of L is all 1's.

The single output matrix contains all the variable elements of both the L and U matrices, stacked together. Because the method uses pivoting (rearranging the lower part of the matrix for better numerical stability), you have to permute input vectors before applying the L and U matrices. The permutation is returned either in the second argument or, in list context, as the second element of the list. You need the permutation for the output to make any sense, so be sure to get it one way or the other.

LU decomposition is the answer to a lot of matrix questions, including inversion and determinant-finding, and "lu_decomp" is used by inv.

If you pass in $perm and $parity, they either must be predeclared PDLs of the correct size ($perm is an n-vector, $parity is a scalar) or scalars.

If the matrix is singular, then the LU decomposition might not be defined; in those cases, "lu_decomp" silently returns undef. Some singular matrices LU-decompose just fine, and those are handled OK but give a zero determinant (and hence can't be inverted).

"lu_decomp" uses pivoting, which rearranges the values in the matrix for more numerical stability. This makes it really good for large and even near-singular matrices. There is a non-pivoting version "lu_decomp2" available which is from 5 to 60 percent faster for typical problems at the expense of failing to compute a result in some cases.

Now that the "lu_decomp" is threaded, it is the recommended LU decomposition routine. It no longer falls back to "lu_decomp2".

"lu_decomp" is ported from Numerical Recipes to PDL. It should probably be implemented in C.

lu_decomp2

  Signature: (a(m,m); [o]lu(m,m))

LU decompose a matrix, with no row permutation

  ($lu, $perm, $parity) = lu_decomp2($x);
  
  $lu = lu_decomp2($x,$perm,$parity);   # or
  $lu = lu_decomp2($x);                 # $perm and $parity are optional
  
  lu_decomp($x->inplace,$perm,$parity); # or
  lu_decomp($x->inplace);               # $perm and $parity are optional

"lu_decomp2" works just like lu_decomp, but it does no pivoting at all. For compatibility with lu_decomp, it will give you a permutation list and a parity scalar if you ask for them -- but they are always trivial.

Because "lu_decomp2" does not pivot, it is numerically unstable -- that means it is less precise than lu_decomp, particularly for large or near-singular matrices. There are also specific types of non-singular matrices that confuse it (e.g. ([0,-1,0],[1,0,0],[0,0,1]), which is a 90 degree rotation matrix but which confuses "lu_decomp2").

On the other hand, if you want to invert rapidly a few hundred thousand small matrices and don't mind missing one or two, it could be the ticket. It can be up to 60% faster at the expense of possible failure of the decomposition for some of the input matrices.

The output is a single matrix that contains the LU decomposition of $a; you can even do it in-place, thereby destroying $a, if you want. See lu_decomp for more information about LU decomposition.

"lu_decomp2" is ported from Numerical Recipes into PDL.

lu_backsub

  Signature: (lu(m,m); perm(m); b(m))

Solve a x = b for matrix a, by back substitution into a's LU decomposition.

  ($lu,$perm,$par) = lu_decomp($x);
  
  $x = lu_backsub($lu,$perm,$par,$y);  # or
  $x = lu_backsub($lu,$perm,$y);       # $par is not required for lu_backsub
  
  lu_backsub($lu,$perm,$y->inplace); # modify $y in-place
  
  $x = lu_backsub(lu_decomp($x),$y); # (ignores parity value from lu_decomp)

Given the LU decomposition of a square matrix (from lu_decomp), "lu_backsub" does back substitution into the matrix to solve "a x = b" for given vector "b". It is separated from the "lu_decomp" method so that you can call the cheap "lu_backsub" multiple times and not have to do the expensive LU decomposition more than once.

"lu_backsub" acts on single vectors and threads in the usual way, which means that it treats $y as the transpose of the input. If you want to process a matrix, you must hand in the transpose of the matrix, and then transpose the output when you get it back. that is because pdls are indexed by (col,row), and matrices are (row,column) by convention, so a 1-D pdl corresponds to a row vector, not a column vector.

If $lu is dense and you have more than a few points to solve for, it is probably cheaper to find "a^-1" with inv, and just multiply "x = a^-1 b".) in fact, inv works by calling "lu_backsub" with the identity matrix.

"lu_backsub" is ported from section 2.3 of Numerical Recipes. It is written in PDL but should probably be implemented in C.

simq

  Signature: ([phys]a(n,n); [phys]b(n); [o,phys]x(n); int [o,phys]ips(n); int flag)

Solution of simultaneous linear equations, "a x = b".

$a is an "n x n" matrix (i.e., a vector of length "n*n"), stored row-wise: that is, "a(i,j) = a[ij]", where "ij = i*n + j".

While this is the transpose of the normal column-wise storage, this corresponds to normal PDL usage. The contents of matrix a may be altered (but may be required for subsequent calls with flag = -1).

$y, $x, $ips are vectors of length "n".

Set "flag=0" to solve. Set "flag=-1" to do a new back substitution for different $y vector using the same a matrix previously reduced when "flag=0" (the $ips vector generated in the previous solution is also required).

See also lu_backsub, which does the same thing with a slightly less opaque interface.

simq ignores the bad-value flag of the input piddles. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

squaretotri

  Signature: (a(n,n); b(m))

Convert a symmetric square matrix to triangular vector storage.

squaretotri does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.