pp_add_boot

Add code to the BOOT section of generated XS file

pp_add_exported

Add functions to the list of exported functions

pp_add_isa

Add entries to the @ISA list

pp_addbegin

Sets code to be added at the top of the generate .pm file

pp_addhdr

Add code and includes to C section of the generated XS file

pp_addpm

Add code to the generated .pm file

pp_addxs

Add extra XS code to the generated XS file

pp_beginwrap

Add BEGIN-block wrapping to code for the generated .pm file

pp_bless

Sets the package to which the XS code is added (default is PDL)

pp_boundscheck

Control state of PDL bounds checking activity

pp_core_importList

Specify what is imported from PDL::Core

pp_def

Define a new PDL function

pp_deprecate_module

Add runtime and POD warnings about a module being deprecated

pp_done

Mark the end of PDL::PP definitions in the file

pp_export_nothing

Clear out the export list for your generated module

pp_line_numbers

Add line number information to simplify debugging of PDL::PP code

pp_setversion

Set the version for .pm and .xs files

A simple example

In the data operation, you must know what dimensions of data you need. First, an example with scalars:

        pp_def('add',
                Pars => 'a(); b(); [o]c();',
                Code => '$c() = $a() + $b();'
        );

That looks a little strange but let's dissect it. The first line is easy: we're defining a routine with the name 'add'. The second line simply declares our parameters and the parentheses mean that they are scalars. We call the string that defines our parameters and their dimensionality the signature of that function. For its relevance with regard to threading and index manipulations check the PDL::Indexing man page.

The third line is the actual operation. You need to use the dollar signs and parentheses to refer to your parameters (this will probably change at some point in the future, once a good syntax is found).

These lines are all that is necessary to actually define the function for PDL (well, actually it isn't; you additionally need to write a Makefile.PL (see below) and build the module (something like 'perl Makefile.PL; make'); but let's ignore that for the moment). So now you can do

        use MyModule;
        $x = pdl 2,3,4;
        $y = pdl 5;
        $c = add($x,$y);
        # or
        add($x,$y,($c=null)); # Alternative form, useful if $c has been
                              # preset to something big, not useful here.

and have threading work correctly (the result is $c == [7 8 9]).

The Pars section: the signature of a PP function

Seeing the above example code you will most probably ask: what is this strange "$c=null" syntax in the second call to our new "add" function? If you take another look at the definition of "add" you will notice that the third argument "c" is flagged with the qualifier "[o]" which tells PDL::PP that this is an output argument. So the above call to add means 'create a new $c from scratch with correct dimensions' - "null" is a special token for 'empty piddle' (you might ask why we haven't used the value "undef" to flag this instead of the PDL specific "null"; we are currently thinking about it ;).

[This should be explained in some other section of the manual as well!!] The reason for having this syntax as an alternative is that if you have really huge piddles, you can do

        $c = PDL->null;
        for(some long loop) {
                # munge a,b
                add($x,$y,$c);
                # munge c, put something back to x,y
        }

and avoid allocating and deallocating $c each time. It is allocated once at the first add() and thereafter the memory stays until $c is destroyed.

If you just say

  $c =  add($x,$y);

the code generated by PP will automatically fill in "$c=null" and return the result. If you want to learn more about the reasons why PDL::PP supports this style where output arguments are given as last arguments check the PDL::Indexing man page.

"[o]" is not the only qualifier a pdl argument can have in the signature. Another important qualifier is the "[t]" option which flags a pdl as temporary. What does that mean? You tell PDL::PP that this pdl is only used for temporary results in the course of the calculation and you are not interested in its value after the computation has been completed. But why should PDL::PP want to know about this in the first place? The reason is closely related to the concepts of pdl auto creation (you heard about that above) and implicit threading. If you use implicit threading the dimensionality of automatically created pdls is actually larger than that specified in the signature. With "[o]" flagged pdls will be created so that they have the additional dimensions as required by the number of implicit thread dimensions. When creating a temporary pdl, however, it will always only be made big enough so that it can hold the result for one iteration in a thread loop, i.e. as large as required by the signature. So less memory is wasted when you flag a pdl as temporary. Secondly, you can use output auto creation with temporary pdls even when you are using explicit threading which is forbidden for normal output pdls flagged with "[o]" (see PDL::Indexing).

Here is an example where we use the [t] qualifier. We define the function "callf" that calls a C routine "f" which needs a temporary array of the same size and type as the array "a" (sorry about the forward reference for $P; it's a pointer access, see below) :

  pp_def('callf',
        Pars => 'a(n); [t] tmp(n); [o] b()',
        Code => 'PDL_Indx ns = $SIZE(n);
                 f($P(a),$P(b),$P(tmp),ns);
                '
  );

Argument dimensions and the signature

Now we have just talked about dimensions of pdls and the signature. How are they related? Let's say that we want to add a scalar + the index number to a vector:

        pp_def('add2',
                Pars => 'a(n); b(); [o]c(n);',
                Code => 'loop(n) %{
                                $c() = $a() + $b() + n;
                         %}'
        );

There are several points to notice here: first, the "Pars" argument now contains the n arguments to show that we have a single dimensions in a and c. It is important to note that dimensions are actual entities that are accessed by name so this declares a and c to have the same first dimensions. In most PP definitions the size of named dimensions will be set from the respective dimensions of non-output pdls (those with no "[o]" flag) but sometimes you might want to set the size of a named dimension explicitly through an integer parameter. See below in the description of the "OtherPars" section how that works.

Constant argument dimensions in the signature

Suppose you want an output piddle to be created automatically and you know that on every call its dimension will have the same size (say 9) regardless of the dimensions of the input piddles. In this case you use the following syntax in the Pars section to specify the size of the dimension:

    ' [o] y(n=9); '

As expected, extra dimensions required by threading will be created if necessary. If you need to assign a named dimension according to a more complicated formula (than a constant) you must use the "RedoDimsCode" key described below.

Type conversions and the signature

The signature also determines the type conversions that will be performed when a PP function is invoked. So what happens when we invoke one of our previously defined functions with pdls of different type, e.g.

  add2($x,$y,($ret=null));

where $x is of type "PDL_Float" and $y of type "PDL_Short"? With the signature as shown in the definition of "add2" above the datatype of the operation (as determined at runtime) is that of the pdl with the 'highest' type (sequence is byte < short < ushort < long < float < double). In the add2 example the datatype of the operation is float ($x has that datatype). All pdl arguments are then type converted to that datatype (they are not converted inplace but a copy with the right type is created if a pdl argument doesn't have the type of the operation). Null pdls don't contribute a type in the determination of the type of the operation. However, they will be created with the datatype of the operation; here, for example, $ret will be of type float. You should be aware of these rules when calling PP functions with pdls of different types to take the additional storage and runtime requirements into account.

These type conversions are correct for most functions you normally define with "pp_def". However, there are certain cases where slightly modified type conversion behaviour is desired. For these cases additional qualifiers in the signature can be used to specify the desired properties with regard to type conversion. These qualifiers can be combined with those we have encountered already (the creation qualifiers "[o]" and "[t]"). Let's go through the list of qualifiers that change type conversion behaviour.

The most important is the "indx" qualifier which comes in handy when a pdl argument represents indices into another pdl. Let's take a look at an example from "PDL::Ufunc":

   pp_def('maximum_ind',
          Pars => 'a(n); indx [o] b()',
          Code => '$GENERIC() cur;
                   PDL_Indx curind;
                   loop(n) %{
                    if (!n || $a() > cur) {cur = $a(); curind = n;}
                   %}
                   $b() = curind;',
   );

The function "maximum_ind" finds the index of the largest element of a vector. If you look at the signature you notice that the output argument "b" has been declared with the additional "indx" qualifier. This has the following consequences for type conversions: regardless of the type of the input pdl "a" the output pdl "b" will be of type "PDL_Indx" which makes sense since "b" will represent an index into "a".

Note that 'curind' is declared as type "PDL_Indx" and not "indx". While most datatype declarations in the 'Pars' section use the same name as the underlying C type, "indx" is a type which is sufficient to handle PDL indexing operations. For 32-bit installs, it can be a 32-bit integer type. For 64-bit installs, it will be a 64-bit integer type.

Furthermore, if you call the function with an existing output pdl "b" its type will not influence the datatype of the operation (see above). Hence, even if "a" is of a smaller type than "b" it will not be converted to match the type of "b" but stays untouched, which saves memory and CPU cycles and is the right thing to do when "b" represents indices. Also note that you can use the 'indx' qualifier together with other qualifiers (the "[o]" and "[t]" qualifiers). Order is significant -- type qualifiers precede creation qualifiers ("[o]" and "[t]").

The above example also demonstrates typical usage of the "$GENERIC()" macro. It expands to the current type in a so called generic loop. What is a generic loop? As you already heard a PP function has a runtime datatype as determined by the type of the pdl arguments it has been invoked with. The PP generated XS code for this function therefore contains a switch like "switch (type) {case PDL_Byte: ... case PDL_Double: ...}" that selects a case based on the runtime datatype of the function (it's called a type ``loop'' because there is a loop in PP code that generates the cases). In any case your code is inserted once for each PDL type into this switch statement. The "$GENERIC()" macro just expands to the respective type in each copy of your parsed code in this "switch" statement, e.g., in the "case PDL_Byte" section "cur" will expand to "PDL_Byte" and so on for the other case statements. I guess you realise that this is a useful macro to hold values of pdls in some code.

There are a couple of other qualifiers with similar effects as "indx". For your convenience there are the "float" and "double" qualifiers with analogous consequences on type conversions as "indx". Let's assume you have a very large array for which you want to compute row and column sums with an equivalent of the "sumover" function. However, with the normal definition of "sumover" you might run into problems when your data is, e.g. of type short. A call like

  sumover($large_pdl,($sums = null));

will result in $sums be of type short and is therefore prone to overflow errors if $large_pdl is a very large array. On the other hand calling

  @dims = $large_pdl->dims; shift @dims;
  sumover($large_pdl,($sums = zeroes(double,@dims)));

is not a good alternative either. Now we don't have overflow problems with $sums but at the expense of a type conversion of $large_pdl to double, something bad if this is really a large pdl. That's where "double" comes in handy:

  pp_def('sumoverd',
         Pars => 'a(n); double [o] b()',
         Code => 'double tmp=0;
                  loop(n) %{ tmp += a(); %}
                  $b() = tmp;',
  );

This gets us around the type conversion and overflow problems. Again, analogous to the "indx" qualifier "double" results in "b" always being of type double regardless of the type of "a" without leading to a type conversion of "a" as a side effect.

Finally, there are the "type+" qualifiers where type is one of "int" or "float". What shall that mean. Let's illustrate the "int+" qualifier with the actual definition of sumover:

  pp_def('sumover',
         Pars => 'a(n); int+ [o] b()',
         Code => '$GENERIC(b) tmp=0;
                  loop(n) %{ tmp += a(); %}
                  $b() = tmp;',
  );

As we had already seen for the "int", "float" and "double" qualifiers, a pdl marked with a "type+" qualifier does not influence the datatype of the pdl operation. Its meaning is "make this pdl at least of type "type" or higher, as required by the type of the operation". In the sumover example this means that when you call the function with an "a" of type PDL_Short the output pdl will be of type PDL_Long (just as would have been the case with the "int" qualifier). This again tries to avoid overflow problems when using small datatypes (e.g. byte images). However, when the datatype of the operation is higher than the type specified in the "type+" qualifier "b" will be created with the datatype of the operation, e.g. when "a" is of type double then "b" will be double as well. We hope you agree that this is sensible behaviour for "sumover". It should be obvious how the "float+" qualifier works by analogy. It may become necessary to be able to specify a set of alternative types for the parameters. However, this will probably not be implemented until someone comes up with a reasonable use for it.

Note that we now had to specify the $GENERIC macro with the name of the pdl to derive the type from that argument. Why is that? If you carefully followed our explanations you will have realised that in some cases "b" will have a different type than the type of the operation. Calling the '$GENERIC' macro with "b" as argument makes sure that the type will always the same as that of "b" in that part of the generic loop.

This is about all there is to say about the "Pars" section in a "pp_def" call. You should remember that this section defines the signature of a PP defined function, you can use several options to qualify certain arguments as output and temporary args and all dimensions that you can later refer to in the "Code" section are defined by name.

It is important that you understand the meaning of the signature since in the latest PDL versions you can use it to define threaded functions from within Perl, i.e. what we call Perl level threading. Please check PDL::Indexing for details.

The Code section

The "Code" section contains the actual XS code that will be in the innermost part of a thread loop (if you don't know what a thread loop is then you still haven't read PDL::Indexing; do it now ;) after any PP macros (like $GENERIC) and PP functions have been expanded (like the "loop" function we are going to explain next).

Let's quickly reiterate the "sumover" example:

  pp_def('sumover',
         Pars => 'a(n); int+ [o] b()',
         Code => '$GENERIC(b) tmp=0;
                  loop(n) %{ tmp += a(); %}
                  $b() = tmp;',
  );

The "loop" construct in the "Code" section also refers to the dimension name so you don't need to specify any limits: the loop is correctly sized and everything is done for you, again.

Next, there is the surprising fact that "$a()" and "$b()" do not contain the index. This is not necessary because we're looping over n and both variables know which dimensions they have so they automatically know they're being looped over.

This feature comes in very handy in many places and makes for much shorter code. Of course, there are times when you want to circumvent this; here is a function which make a matrix symmetric and serves as an example of how to code explicit looping:

        pp_def('symm',
                Pars => 'a(n,n); [o]c(n,n);',
                Code => 'loop(n) %{
                                int n2;
                                for(n2=n; n2<$SIZE(n); n2++) {
                                        $c(n0 => n, n1 => n2) =
                                        $c(n0 => n2, n1 => n) =
                                         $a(n0 => n, n1 => n2);
                                }
                        %}
                '
        );

Let's dissect what is happening. Firstly, what is this function supposed to do? From its signature you see that it takes a 2D matrix with equal numbers of columns and rows and outputs a matrix of the same size. From a given input matrix $a it computes a symmetric output matrix $c (symmetric in the matrix sense that A^T = A where ^T means matrix transpose, or in PDL parlance $c == $c->xchg(0,1)). It does this by using only the values on and below the diagonal of $a. In the output matrix $c all values on and below the diagonal are the same as those in $a while those above the diagonal are a mirror image of those below the diagonal (above and below are here interpreted in the way that PDL prints 2D pdls). If this explanation still sounds a bit strange just go ahead, make a little file into which you write this definition, build the new PDL extension (see section on Makefiles for PP code) and try it out with a couple of examples.

Having explained what the function is supposed to do there are a couple of points worth noting from the syntactical point of view. First, we get the size of the dimension named "n" again by using the $SIZE macro. Second, there are suddenly these funny "n0" and "n1" index names in the code though the signature defines only the dimension "n". Why this? The reason becomes clear when you note that both the first and second dimension of $a and $b are named "n" in the signature of "symm". This tells PDL::PP that the first and second dimension of these arguments should have the same size. Otherwise the generated function will raise a runtime error. However, now in an access to $a and $c PDL::PP cannot figure out which index "n" refers to any more just from the name of the index. Therefore, the indices with equal dimension names get numbered from left to right starting at 0, e.g. in the above example "n0" refers to the first dimension of $a and $c, "n1" to the second and so on.

In all examples so far, we have only used the "Pars" and "Code" members of the hash that was passed to "pp_def". There are certainly other keys that are recognised by PDL::PP and we will hear about some of them in the course of this document. Find a (non-exhaustive) list of keys in Appendix A. A list of macros and PPfunctions (we have only encountered some of those in the examples above yet) that are expanded in values of the hash argument to "pp_def" is summarised in Appendix B.

At this point, it might be appropriate to mention that PDL::PP is not a completely static, well designed set of routines (as Tuomas puts it: "stop thinking of PP as a set of routines carved in stone") but rather a collection of things that the PDL::PP author (Tuomas J. Lukka) considered he would have to write often into his PDL extension routines. PP tries to be expandable so that in the future, as new needs arise, new common code can be abstracted back into it. If you want to learn more on why you might want to change PDL::PP and how to do it check the section on PDL::PP internals.

Handling bad values

If you do not have bad-value support compiled into PDL you can ignore this section and the related keys: "BadCode", "HandleBad", ... (try printing out the value of $PDL::Bad::Status - if it equals 0 then move straight on).

There are several keys and macros used when writing code to handle bad values. The first one is the "HandleBad" key:

HandleBad => 0

This flags a pp-routine as NOT handling bad values. If this routine is sent piddles with their "badflag" set, then a warning message is printed to STDOUT and the piddles are processed as if the value used to represent bad values is a valid number. The "badflag" value is not propagated to the output piddles.

An example of when this is used is for FFT routines, which generally do not have a way of ignoring part of the data.

HandleBad => 1

This causes PDL::PP to write extra code that ensures the BadCode section is used, and that the "$ISBAD()" macro (and its brethren) work.

HandleBad is not given

If any of the input piddles have their "badflag" set, then the output piddles will have their "badflag" set, but any supplied BadCode is ignored.

The value of "HandleBad" is used to define the contents of the "BadDoc" key, if it is not given.

To handle bad values, code must be written somewhat differently; for instance,

 $c() = $a() + $b();

becomes something like

 if ( $a() != BADVAL && $b() != BADVAL ) {
    $c() = $a() + $b();
 } else {
    $c() = BADVAL;
 }

However, we only want the second version if bad values are present in the input piddles (and that bad-value support is wanted!) - otherwise we actually want the original code. This is where the "BadCode" key comes in; you use it to specify the code to execute if bad values may be present, and PP uses both it and the "Code" section to create something like:

 if ( bad_values_are_present ) {
    fancy_threadloop_stuff {
       BadCode
    }
 } else {
    fancy_threadloop_stuff {
       Code
    }
 }

This approach means that there is virtually no overhead when bad values are not present (i.e. the badflag routine returns 0).

The C preprocessor symbol "PDL_BAD_CODE" is defined when the bad code is compiled, so that you can reduce the amount of code you write. The BadCode section can use the same macros and looping constructs as the Code section. However, it wouldn't be much use without the following additional macros:

$ISBAD(var)

To check whether a piddle's value is bad, use the $ISBAD macro:

 if ( $ISBAD(a()) ) { printf("a() is bad\n"); }
    

You can also access given elements of a piddle:

 if ( $ISBAD(a(n=>l)) ) { printf("element %d of a() is bad\n", l); }
    

$ISGOOD(var)

This is the opposite of the $ISBAD macro.

$SETBAD(var)

For when you want to set an element of a piddle bad.

$ISBADVAR(c_var,pdl)

If you have cached the value of a piddle "$a()" into a c-variable ("foo" say), then to check whether it is bad, use "$ISBADVAR(foo,a)".

$ISGOODVAR(c_var,pdl)

As above, but this time checking that the cached value isn't bad.

$SETBADVAR(c_var,pdl)

To copy the bad value for a piddle into a c variable, use "$SETBADVAR(foo,a)".

TODO: mention "$PPISBAD()" etc macros.

Using these macros, the above code could be specified as:

 Code => '$c() = $a() + $b();',
 BadCode => '
    if ( $ISBAD(a()) || $ISBAD(b()) ) {
       $SETBAD(c());
    } else {
       $c() = $a() + $b();
    }',

Since this is Perl, TMTOWTDI, so you could also write:

 BadCode => '
    if ( $ISGOOD(a()) && $ISGOOD(b()) ) {
       $c() = $a() + $b();
    } else {
       $SETBAD(c());
    }',

You can reduce code repition using the C "PDL_BAD_CODE" macro, using the same code for both of the "Code" and "BadCode" sections:

    #ifdef PDL_BAD_CODE
    if ( $ISGOOD(a()) && $ISGOOD(b()) ) {
    #endif PDL_BAD_CODE
       $c() = $a() + $b();
    #ifdef PDL_BAD_CODE
    } else {
       $SETBAD(c());
    }
    #endif PDL_BAD_CODE

If you want access to the value of the badflag for a given piddle, you can use the PDL STATE macros:

$ISPDLSTATEBAD(pdl)

$ISPDLSTATEGOOD(pdl)

$SETPDLSTATEBAD(pdl)

$SETPDLSTATEGOOD(pdl)

TODO: mention the "FindBadStatusCode" and "CopyBadStatusCode" options to "pp_def", as well as the "BadDoc" key.

Interfacing your own/library functions using PP

Now, consider the following: you have your own C function (that may in fact be part of some library you want to interface to PDL) which takes as arguments two pointers to vectors of double:

        void myfunc(int n,double *v1,double *v2);

The correct way of defining the PDL function is

        pp_def('myfunc',
                Pars => 'a(n); [o]b(n);',
                GenericTypes => ['D'],
                Code => 'myfunc($SIZE(n),$P(a),$P(b));'
        );

The "$P("par")" syntax returns a pointer to the first element and the other elements are guaranteed to lie after that.

Notice that here it is possible to make many mistakes. First, $SIZE(n) must be used instead of "n". Second, you shouldn't put any loops in this code. Third, here we encounter a new hash key recognised by PDL::PP : the "GenericTypes" declaration tells PDL::PP to ONLY GENERATE THE TYPELOOP FOP THE LIST OF TYPES SPECIFIED. In this case "double". This has two advantages. Firstly the size of the compiled code is reduced vastly, secondly if non-double arguments are passed to "myfunc()" PDL will automatically convert them to double before passing to the external C routine and convert them back afterwards.

One can also use "Pars" to qualify the types of individual arguments. Thus one could also write this as:

        pp_def('myfunc',
                Pars => 'double a(n); double [o]b(n);',
                Code => 'myfunc($SIZE(n),$P(a),$P(b));'
        );

The type specification in "Pars" exempts the argument from variation in the typeloop - rather it is automatically converted too and from the type specified. This is obviously useful in a more general example, e.g.:

        void myfunc(int n,float *v1,long *v2);
        pp_def('myfunc',
                Pars => 'float a(n); long [o]b(n);',
                GenericTypes => ['F'],
                Code => 'myfunc($SIZE(n),$P(a),$P(b));'
        );

Note we still use "GenericTypes" to reduce the size of the type loop, obviously PP could in principle spot this and do it automatically though the code has yet to attain that level of sophistication!

Finally note when types are converted automatically one MUST use the "[o]" qualifier for output variables or you hard one changes will get optimised away by PP!

If you interface a large library you can automate the interfacing even further. Perl can help you again(!) in doing this. In many libraries you have certain calling conventions. This can be exploited. In short, you can write a little parser (which is really not difficult in Perl) that then generates the calls to "pp_def" from parsed descriptions of the functions in that library. For an example, please check the Slatec interface in the "Lib" tree of the PDL distribution. If you want to check (during debugging) which calls to PP functions your Perl code generated a little helper package comes in handy which replaces the PP functions by identically named ones that dump their arguments to stdout.

Just say

   perl -MPDL::PP::Dump myfile.pd

to see the calls to "pp_def" and friends. Try it with ops.pd and slatec.pd. If you're interested (or want to enhance it), the source is in Basic/Gen/PP/Dump.pm

Other macros and functions in the Code section

Macros: So far we have encountered the $SIZE, $GENERIC and $P macros. Now we are going to quickly explain the other macros that are expanded in the "Code" section of PDL::PP along with examples of their usage.

$T

The $T macro is used for type switches. This is very useful when you have to use different external (e.g. library) functions depending on the input type of arguments. The general syntax is

        $Ttypeletters(type_alternatives)
    

where "typeletters" is a permutation of a subset of the letters "BSULFD" which stand for Byte, Short, Ushort, etc. and "type_alternatives" are the expansions when the type of the PP operation is equal to that indicated by the respective letter. Let's illustrate this incomprehensible description by an example. Assuming you have two C functions with prototypes

  void float_func(float *in, float *out);
  void double_func(double *in, double *out);
    

which do basically the same thing but one accepts float and the other double pointers. You could interface them to PDL by defining a generic function "foofunc" (which will call the correct function depending on the type of the transformation):

  pp_def('foofunc',
        Pars => ' a(n); [o] b();',
        Code => ' $TFD(float_func,double_func) ($P(a),$P(b));'
        GenericTypes => [qw(F D)],
  );
    

Please note that you can't say

       Code => ' $TFD(float,double)_func ($P(a),$P(b));'
    

since the $T macro expands with trailing spaces, analogously to C preprocessor macros. The slightly longer form illustrated above is correct. If you really want brevity, you can of course do

        '$TBSULFD('.(join ',',map {"long_identifier_name_$_"}
                qw/byt short unseigned lounge flotte dubble/).');'
    

$PP

The $PP macro is used for a so called physical pointer access. The physical refers to some internal optimisations of PDL (for those who are familiar with the PDL core we are talking about the vaffine optimisations). This macro is mainly for internal use and you shouldn't need to use it in any of your normal code.

$COMP (and the "OtherPars" section)

The $COMP macro is used to access non-pdl values in the code section. Its name is derived from the implementation of transformations in PDL. The variables you can refer to using $COMP are members of the ``compiled'' structure that represents the PDL transformation in question but does not yet contain any information about dimensions (for further details check PDL::Internals). However, you can treat $COMP just as a black box without knowing anything about the implementation of transformations in PDL. So when would you use this macro? Its main usage is to access values of arguments that are declared in the "OtherPars" section of a "pp_def" definition. But then you haven't heard about the "OtherPars" key yet?! Let's have another example that illustrates typical usage of both new features:

  pp_def('pnmout',
        Pars => 'a(m)',
        OtherPars => "char* fd",
        GenericTypes => [qw(B U S L)],
        Code => 'PerlIO *fp;
                 IO *io;
               io = GvIO(gv_fetchpv($COMP(fd),FALSE,SVt_PVIO));
                 if (!io || !(fp = IoIFP(io)))
                        croak("Can\'t figure out FP");
                 if (PerlIO_write(fp,$P(a),len) != len)
                                croak("Error writing pnm file");
  ');
    

This function is used to write data from a pdl to a file. The file descriptor is passed as a string into this function. This parameter does not go into the "Pars" section since it cannot be usefully treated like a pdl but rather into the aptly named "OtherPars" section. Parameters in the "OtherPars" section follow those in the "Pars" section when invoking the function, i.e.

   open FILE,">out.dat" or die "couldn't open out.dat";
   pnmout($pdl,'FILE');
    

When you want to access this parameter inside the code section you have to tell PP by using the $COMP macro, i.e. you write "$COMP(fd)" as in the example. Otherwise PP wouldn't know that the "fd" you are referring to is the same as that specified in the "OtherPars" section.

Another use for the "OtherPars" section is to set a named dimension in the signature. Let's have an example how that is done:

  pp_def('setdim',
        Pars => '[o] a(n)',
        OtherPars => 'int ns => n',
        Code => 'loop(n) %{ $a() = n; %}',
  );
    

This says that the named dimension "n" will be initialised from the value of the other parameter "ns" which is of integer type (I guess you have realised that we use the "CType From => named_dim" syntax). Now you can call this function in the usual way:

  setdim(($x=null),5);
  print $x;
    [ 0 1 2 3 4 ]
    

Admittedly this function is not very useful but it demonstrates how it works. If you call the function with an existing pdl and you don't need to explicitly specify the size of "n" since PDL::PP can figure it out from the dimensions of the non-null pdl. In that case you just give the dimension parameter as "-1":

  $x = hist($y);
  setdim($x,-1);
    

That should do it.

The only PP function that we have used in the examples so far is "loop". Additionally, there are currently two other functions which are recognised in the "Code" section:

threadloop

As we heard above the signature of a PP defined function defines the dimensions of all the pdl arguments involved in a primitive operation. However, you often call the functions that you defined with PP with pdls that have more dimensions than those specified in the signature. In this case the primitive operation is performed on all subslices of appropriate dimensionality in what is called a thread loop (see also overview above and PDL::Indexing). Assuming you have some notion of this concept you will probably appreciate that the operation specified in the code section should be optimised since this is the tightest loop inside a thread loop. However, if you revisit the example where we define the "pnmout" function, you will quickly realise that looking up the "IO" file descriptor in the inner thread loop is not very efficient when writing a pdl with many rows. A better approach would be to look up the "IO" descriptor once outside the thread loop and use its value then inside the tightest thread loop. This is exactly where the "threadloop" function comes in handy. Here is an improved definition of "pnmout" which uses this function:

  pp_def('pnmout',
        Pars => 'a(m)',
        OtherPars => "char* fd",
        GenericTypes => [qw(B U S L)],
        Code => 'PerlIO *fp;
                 IO *io;
                 int len;
               io = GvIO(gv_fetchpv($COMP(fd),FALSE,SVt_PVIO));
                 if (!io || !(fp = IoIFP(io)))
                        croak("Can\'t figure out FP");
                 len = $SIZE(m) * sizeof($GENERIC());
                 threadloop %{
                    if (PerlIO_write(fp,$P(a),len) != len)
                                croak("Error writing pnm file");
                 %}
  ');
    

This works as follows. Normally the C code you write inside the "Code" section is placed inside a thread loop (i.e. PP generates the appropriate wrapping XS code around it). However, when you explicitly use the "threadloop" function, PDL::PP recognises this and doesn't wrap your code with an additional thread loop. This has the effect that code you write outside the thread loop is only executed once per transformation and just the code with in the surrounding "%{ ... %}" pair is placed within the tightest thread loop. This also comes in handy when you want to perform a decision (or any other code, especially CPU intensive code) only once per thread, i.e.

  pp_addhdr('
    #define RAW 0
    #define ASCII 1
  ');
  pp_def('do_raworascii',
         Pars => 'a(); b(); [o]c()',
         OtherPars => 'int mode',
       Code => ' switch ($COMP(mode)) {
                    case RAW:
                        threadloop %{
                            /* do raw stuff */
                        %}
                        break;
                    case ASCII:
                        threadloop %{
                            /* do ASCII stuff */
                        %}
                        break;
                    default:
                        croak("unknown mode");
                   }'
   );
    

types

The types function works similar to the $T macro. However, with the "types" function the code in the following block (delimited by "%{" and "%}" as usual) is executed for all those cases in which the datatype of the operation is any of the types represented by the letters in the argument to "type", e.g.

     Code => '...
             types(BSUL) %{
                 /* do integer type operation */
             %}
             types(FD) %{
                 /* do floating point operation */
             %}
             ...'
    

The RedoDimsCode Section

The "RedoDimsCode" key is an optional key that is used to compute dimensions of piddles at runtime in case the standard rules for computing dimensions from the signature are not sufficient. The contents of the "RedoDimsCode" entry is interpreted in the same way that the Code section is interpreted-- i.e., PP macros are expanded and the result is interpreted as C code. The purpose of the code is to set the size of some dimensions that appear in the signature. Storage allocation and threadloops and so forth will be set up as if the computed dimension had appeared in the signature. In your code, you first compute the desired size of a named dimension in the signature according to your needs and then assign that value to it via the $SIZE() macro.

As an example, consider the following situation. You are interfacing an external library routine that requires an temporary array for workspace to be passed as an argument. Two input data arrays that are passed are p(m) and x(n). The output data array is y(n). The routine requires a workspace array with a length of n+m*m, and you'd like the storage created automatically just like it would be for any piddle flagged with [t] or [o]. What you'd like is to say something like

 pp_def( "myexternalfunc",
  Pars => " p(m);  x(n);  [o] y; [t] work(n+m*m); ", ...

but that won't work, because PP can't interpret expressions with arithmetic in the signature. Instead you write

  pp_def(
      "myexternalfunc",
      Pars         => ' p(m);  x(n);  [o] y(); [t] work(wn); ',
      RedoDimsCode => '
        PDL_Indx im = $PDL(p)->dims[0];
        PDL_Indx in = $PDL(x)->dims[0];
        PDL_Indx min = in + im * im;
        PDL_Indx inw = $PDL(work)->dims[0];
        $SIZE(wn) = inw >= min ? inw : min;
      ',
      Code => '
        externalfunc( $P(p), $P(x), $SIZE(m), $SIZE(n), $P(work) );
      '
  );

This code works as follows: The macro $PDL(p) expands to a pointer to the pdl struct for the piddle p. You don't want a pointer to the data ( ie $P ) in this case, because you want to access the methods for the piddle on the C level. You get the first dimension of each of the piddles and store them in integers. Then you compute the minimum length the work array can be. If the user sent a piddle "work" with sufficient storage, then leave it alone. If the user sent, say a null pdl, or no pdl at all, then the size of wn will be zero and you reset it to the minimum value. Before the code in the Code section is executed PP will create the proper storage for "work" if it does not exist. Note that you only took the first dimension of "p" and "x" because the user may have sent piddles with extra threading dimensions. Of course, the temporary piddle "work" (note the [t] flag) should not be given any thread dimensions anyway.

You can also use "RedoDimsCode" to set the dimension of a piddle flagged with [o]. In this case you set the dimensions for the named dimension in the signature using $SIZE() as in the preceding example. However, because the piddle is flagged with [o] instead of [t], threading dimensions will be added if required just as if the size of the dimension were computed from the signature according to the usual rules. Here is an example from PDL::Math

 pp_def("polyroots",
      Pars => 'cr(n); ci(n); [o]rr(m); [o]ri(m);',
      RedoDimsCode => 'PDL_Indx sn = $PDL(cr)->dims[0]; $SIZE(m) = sn-1;',

The input piddles are the real and imaginary parts of complex coefficients of a polynomial. The output piddles are real and imaginary parts of the roots. There are "n" roots to an "n"th order polynomial and such a polynomial has "n+1" coefficients (the zeoreth through the "n"th). In this example, threading will work correctly. That is, the first dimension of the output piddle with have its dimension adjusted, but other threading dimensions will be assigned just as if there were no "RedoDimsCode".

Typemap handling in the "OtherPars" section

The "OtherPars" section discussed above is very often absolutely crucial when you interface external libraries with PDL. However in many cases the external libraries either use derived types or pointers of various types.

The standard way to handle this in Perl is to use a "typemap" file. This is discussed in some detail in perlxs in the standard Perl documentation. In PP the functionality is very similar, so you can create a "typemap" file in the directory where your PP file resides and when it is built it is automatically read in to figure out the appropriate translation between the C type and Perl's built-in type.

That said, there are a couple of important differences from the general handling of types in XS. The first, and probably most important, is that at the moment pointers to types are not allowed in the "OtherPars" section. To get around this limitation you must use the "IV" type (thanks to Judd Taylor for pointing out that this is necessary for portability).

It is probably best to illustrate this with a couple of code-snippets:

For instance the "gsl_spline_init" function has the following C declaration:

    int  gsl_spline_init(gsl_spline * spline,
          const double xa[], const double ya[], size_t size);

Clearly the "xa" and "ya" arrays are candidates for being passed in as piddles and the "size" argument is just the length of these piddles so that can be handled by the "$SIZE()" macro in PP. The problem is the pointer to the "gsl_spline" type. The natural solution would be to write an "OtherPars" declaration of the form

    OtherPars => 'gsl_spline *spl'

and write a short "typemap" file which handled this type. This does not work at present however! So what you have to do is to go around the problem slightly (and in some ways this is easier too!):

The solution is to declare "spline" in the "OtherPars" section using an "Integer Value", "IV". This hides the nature of the variable from PP and you then need to (well to avoid compiler warnings at least!) perform a type cast when you use the variable in your code. Thus "OtherPars" should take the form:

    OtherPars => 'IV spl'

and when you use it in the code you will write

    INT2PTR(gsl_spline *, $COMP(spl))

where the Perl API macro "INT2PTR" has been used to handle the pointer cast to avoid compiler warnings and problems for machines with mixed 32bit and 64bit Perl configurations. Putting this together as Andres Jordan has done (with the modification using "IV" by Judd Taylor) in the "gsl_interp.pd" in the distribution source you get:

     pp_def('init_meat',
            Pars => 'double x(n); double y(n);',
            OtherPars => 'IV spl',
            Code =>'
         gsl_spline_init,( INT2PTR(gsl_spline *, $COMP(spl)), $P(x),$P(y),$SIZE(n)));'
    );

where I have removed a macro wrapper call, but that would obscure the discussion.

The other minor difference as compared to the standard typemap handling in Perl, is that the user cannot specify non-standard typemap locations or typemap filenames using the "TYPEMAPS" option in MakeMaker... Thus you can only use a file called "typemap" and/or the "IV" trick above.

Other useful PP keys in data operation definitions

You have already heard about the "OtherPars" key. Currently, there are not many other keys for a data operation that will be useful in normal (whatever that is) PP programming. In fact, it would be interesting to hear about a case where you think you need more than what is provided at the moment. Please speak up on one of the PDL mailing lists. Most other keys recognised by "pp_def" are only really useful for what we call slice operations (see also above).

One thing that is strongly being planned is variable number of arguments, which will be a little tricky.

An incomplete list of the available keys:

Inplace

Setting this key marks the routine as working inplace - ie the input and output piddles are the same. An example is "$x->inplace->sqrt()" (or "sqrt(inplace($x))").

  pp_def('replacebad',HandleBad => 1,
    Pars => 'a(); [o]b();',
    OtherPars => 'double newval',
    Inplace => 1,
    CopyBadStatusCode => 
    '/* propagate badflag if inplace AND it has changed */
     if ( a == b && $ISPDLSTATEBAD(a) )
       PDL->propagate_badflag( b, 0 );
     /* always make sure the output is "good" */
     $SETPDLSTATEGOOD(b);
    ',
    ...

Other PDL::PP functions to support concise package definition

So far, we have described the "pp_def" and "pp_done" functions. PDL::PP exports a few other functions to aid you in writing concise PDL extension package definitions.

pp_addhdr

Often when you interface library functions as in the above example you have to include additional C include files. Since the XS file is generated by PP we need some means to make PP insert the appropriate include directives in the right place into the generated XS file. To this end there is the "pp_addhdr" function. This is also the function to use when you want to define some C functions for internal use by some of the XS functions (which are mostly functions defined by "pp_def"). By including these functions here you make sure that PDL::PP inserts your code before the point where the actual XS module section begins and will therefore be left untouched by xsubpp (cf. perlxs and perlxstut man pages).

A typical call would be

  pp_addhdr('
  #include <unistd.h>       /* we need defs of XXXX */
  #include "libprotos.h"    /* prototypes of library functions */
  #include "mylocaldecs.h"  /* Local decs */
  static void do_the real_work(PDL_Byte * in, PDL_Byte * out, int n)
  {
        /* do some calculations with the data */
  }
  ');

This ensures that all the constants and prototypes you need will be properly included and that you can use the internal functions defined here in the "pp_def"s, e.g.:

  pp_def('barfoo',
         Pars => ' a(n); [o] b(n)',
         GenericTypes => ['B'],
         Code => ' PDL_Indx ns = $SIZE(n);
                   do_the_real_work($P(a),$P(b),ns);
                 ',
  );

pp_addpm

In many cases the actual PP code (meaning the arguments to "pp_def" calls) is only part of the package you are currently implementing. Often there is additional Perl code and XS code you would normally have written into the pm and XS files which are now automatically generated by PP. So how to get this stuff into those dynamically generated files? Fortunately, there are a couple of functions, generally called "pp_addXXX" that assist you in doing this.

Let's assume you have additional Perl code that should go into the generated pm-file. This is easily achieved with the "pp_addpm" command:

   pp_addpm(<<'EOD');
   =head1 NAME
   PDL::Lib::Mylib -- a PDL interface to the Mylib library
   =head1 DESCRIPTION
   This package implements an interface to the Mylib package with full
   threading and indexing support (see L<PDL::Indexing>).
   =cut
   use PGPLOT;
   =head2 use_myfunc
        this function applies the myfunc operation to all the
        elements of the input pdl regardless of dimensions
        and returns the sum of the result
   =cut
   sub use_myfunc {
        my $pdl = shift;
        myfunc($pdl->clump(-1),($res=null));
        return $res->sum;
   }
   EOD

pp_add_exported

You have probably got the idea. In some cases you also want to export your additional functions. To avoid getting into trouble with PP which also messes around with the @EXPORT array you just tell PP to add your functions to the list of exported functions:

  pp_add_exported('use_myfunc gethynx');

pp_add_isa

The "pp_add_isa" command works like the the "pp_add_exported" function. The arguments to "pp_add_isa" are added the @ISA list, e.g.

  pp_add_isa(' Some::Other::Class ');

pp_bless

If your pp_def routines are to be used as object methods use "pp_bless" to specify the package (i.e. class) to which your pp_defed methods will be added. For example, "pp_bless('PDL::MyClass')". The default is "PDL" if this is omitted.

pp_addxs

Sometimes you want to add extra XS code of your own (that is generally not involved with any threading/indexing issues but supplies some other functionality you want to access from the Perl side) to the generated XS file, for example

  pp_addxs('','
  # Determine endianness of machine
  int
  isbigendian()
     CODE:
       unsigned short i;
       PDL_Byte *b;
       i = 42; b = (PDL_Byte*) (void*) &i;
       if (*b == 42)
          RETVAL = 0;
       else if (*(b+1) == 42)
          RETVAL = 1;
       else
          croak("Impossible - machine is neither big nor little endian!!\n");
       OUTPUT:
         RETVAL
  ');

Especially "pp_add_exported" and "pp_addxs" should be used with care. PP uses PDL::Exporter, hence letting PP export your function means that they get added to the standard list of function exported by default (the list defined by the export tag ``:Func''). If you use "pp_addxs" you shouldn't try to do anything that involves threading or indexing directly. PP is much better at generating the appropriate code from your definitions.

pp_add_boot

Finally, you may want to add some code to the BOOT section of the XS file (if you don't know what that is check perlxs). This is easily done with the "pp_add_boot" command:

  pp_add_boot(<<EOB);
        descrip = mylib_initialize(KEEP_OPEN);
        if (descrip == NULL)
           croak("Can't initialize library");
        GlobalStruc->descrip = descrip;
        GlobalStruc->maxfiles = 200;
  EOB

pp_export_nothing

By default, PP.pm puts all subs defined using the pp_def function into the output .pm file's EXPORT list. This can create problems if you are creating a subclassed object where you don't want any methods exported. (i.e. the methods will only be called using the $object->method syntax).

For these cases you can call pp_export_nothing() to clear out the export list. Example (At the end of the .pd file):

  pp_export_nothing();
  pp_done();

pp_core_importList

By default, PP.pm puts the 'use Core;' line into the output .pm file. This imports Core's exported names into the current namespace, which can create problems if you are over-riding one of Core's methods in the current file. You end up getting messages like "Warning: sub sumover redefined in file subclass.pm" when running the program.

For these cases the pp_core_importList can be used to change what is imported from Core.pm. For example:

  pp_core_importList('()')

This would result in

  use Core();

being generated in the output .pm file. This would result in no names being imported from Core.pm. Similarly, calling

  pp_core_importList(' qw/ barf /')

would result in

  use Core qw/ barf/;

being generated in the output .pm file. This would result in just 'barf' being imported from Core.pm.

pp_setversion

I am pretty sure that this allows you to simultaneously set the .pm and .xs files' versions, thus avoiding unnecessary version-skew between the two. To use this, simply have the following line at some point in your .pd file:

 pp_setversion('0.0.3');

However, don't use this if you use Module::Build::PDL. See that module's documentation for details.

pp_deprecate_module

If a particular module is deemed obsolete, this function can be used to mark it as deprecated. This has the effect of emitting a warning when a user tries to "use" the module. The generated POD for this module also carries a deprecation notice. The replacement module can be passed as an argument like this:

 pp_deprecate_module( infavor => "PDL::NewNonDeprecatedModule" );

Note that function affects only the runtime warning and the POD.

Slices and bad values

Slice operations need to be able to handle bad values (if support is compiled into PDL). The easiest thing to do is look at Basic/Slices/slices.pd to see how this works.

Along with "BadCode", there are also the "BadBackCode" and "BadRedoDimsCode" keys for "pp_def". However, any "EquivCPOffsCode" should not need changing, since any changes are absorbed into the definition of the "$EQUIVCPOFFS()" macro (i.e. it is handled automatically by PDL::PP).

A few notes on writing a slicing routine...

The following few paragraphs describe writing of a new slicing routine ('range'); any errors are CED's. (--CED 26-Aug-2002)

Macros

Macros labeled by (bad) are only used if bad-value support is compiled into PDL.

$variablename_from_sig()

access a pdl (by its name) that was specified in the signature

$COMP(x)

access a value in the private data structure of this transformation (mainly used to use an argument that is specified in the "OtherPars" section)

$SIZE(n)

replaced at runtime by the actual size of a named dimension (as specified in the signature)

$GENERIC()

replaced by the C type that is equal to the runtime type of the operation

$P(a)

a pointer access to the PDL named "a" in the signature. Useful for interfacing to C functions

$PP(a)

a physical pointer access to pdl "a"; mainly for internal use

$TXXX(Alternative,Alternative)

expansion alternatives according to runtime type of operation, where XXX is some string that is matched by "/[BSULNQFD+]/".

$PDL(a)

return a pointer to the pdl data structure (pdl *) of piddle "a"

$ISBAD(a()) (bad)

returns true if the value stored in "a()" equals the bad value for this piddle. Requires "HandleBad" being set to 1.

$ISGOOD(a()) (bad)

returns true if the value stored in "a()" does not equal the bad value for this piddle. Requires "HandleBad" being set to 1.

$SETBAD(a()) (bad)

Sets "a()" to equal the bad value for this piddle. Requires "HandleBad" being set to 1.

functions

"loop(DIMS) %{ ... %}"

loop over named dimensions; limits are generated automatically by PP

"threadloop %{ ... %}"

enclose following code in a thread loop

"types(TYPES) %{ ... %}"

execute following code if type of operation is any of "TYPES"

Generating C and XS Code

PDL::PP's main purpose is to make it easy for you to wrap the threading engine around your own C code, but you can do some other things, too.

pp_def

Used to wrap the threading engine around your C code. Virtually all of this document discusses the use of pp_def.

pp_done

Indicates you are done with PDL::PP and that it should generate its .xs and .pm files based upon the other pp_* functions that you have called. This function takes no arguments.

pp_addxs

This lets you add XS code to your .xs file. This is useful if you want to create Perl-accessible functions that invoke C code but cannot or should not invoke the threading engine. XS is the standard means by which you wrap Perl-accessible C code. You can learn more at perlxs.

pp_add_boot

This function adds whatever string you pass to the XS BOOT section. The BOOT section is C code that gets called by Perl when your module is loaded and is useful for automatic initialization. You can learn more about XS and the BOOT section at perlxs.

pp_addhdr

Adds pure-C code to your XS file. XS files are structured such that pure C code must come before XS specifications. This allows you to specify such C code.

pp_boundscheck

PDL normally checks the bounds of your accesses before making them. You can turn that on or off at runtime by setting MyPackage::set_boundscheck. This function allows you to remove that runtime flexibility and never do bounds checking. It also returns the current boundschecking status if called without any argumens.

NOTE: I have not found anything about bounds checking in other documentation. That needs to be addressed.

Generating Perl Code

Many functions imported when you use PDL::PP allow you to modify the contents of the generated .pm file. In addition to pp_def and pp_done, the role of these functions is primarily to add code to various parts of your generated .pm file.

pp_addpm

Adds Perl code to the generated .pm file. PDL::PP actually keeps track of three different sections of generated code: the Top, the Middle, and the Bottom. You can add Perl code to the Middle section using the one-argument form, where the argument is the Perl code you want to supply. In the two-argument form, the first argument is an anonymous hash with only one key that specifies where to put the second argument, which is the string that you want to add to the .pm file. The hash is one of these three:

 {At => 'Top'}
 {At => 'Middle'}
 {At => 'Bot'}
    

For example:

 pp_addpm({At => 'Bot'}, <<POD);
 
 =head1 Some documentation
 
 I know I'm typing this in the middle of my file, but it'll go at
 the bottom.
 
 =cut
 
 POD
    

Warning: If, in the middle of your .pd file, you put documentation meant for the bottom of your pod, you will thoroughly confuse CPAN. On the other hand, if in the middle of your .pd file, you add some Perl code destined for the bottom or top of your .pm file, you only have yourself to confuse. :-)

pp_beginwrap

Adds BEGIN-block wrapping. Certain declarations can be wrapped in BEGIN blocks, though the default behavior is to have no such wrapping.

pp_addbegin

Sets code to be added to the top of your .pm file, even above code that you specify with "pp_addpm({At => 'Top'}, ...)". Unlike pp_addpm, calling this overwrites whatever was there before. Generally, you probably shouldn't use it.

Tracking Line Numbers

When you get compile errors, either from your C-like code or your Perl code, it can help to make those errors back to the line numbers in the source file at which the error occurred.

pp_line_numbers

Takes a line number and a (usually long) string of code. The line number should indicate the line at which the quote begins. This is usually Perl's "__LINE__" literal, unless you are using heredocs, in which case it is "__LINE__ + 1". The returned string has #line directives interspersed to help the compiler report errors on the proper line.

Modifying the Symbol Table and Export Behavior

PDL::PP usually exports all functions generated using pp_def, and usually installs them into the PDL symbol table. However, you can modify this behavior with these functions.

pp_bless

Sets the package (symbol table) to which the XS code is added. The default is PDL, which is generally what you want. If you use the default blessing and you create a function myfunc, then you can do the following:

 $piddle->myfunc(<args>);
 PDL::myfunc($piddle, <args>);
    

On the other hand, if you bless your functions into another package, you cannot invoke them as PDL methods, and must invoke them as:

 MyPackage::myfunc($piddle, <args>);
    

Of course, you could always use the PMFunc key to add your function to the PDL symbol table, but why do that?

pp_add_isa

Adds to the list of modules from which your module inherits. The default list is

 qw(PDL::Exporter DynaLoader)
    

pp_core_importlist

At the top of your generated .pm file is a line that looks like this:

 use PDL::Core;
    

You can modify that by specifying a string to pp_core_importlist. For example,

 pp_core_importlist('::Blarg');
    

will result in

 use PDL::Core::Blarg;
    

You can use this, for example, to add a list of symbols to import from PDL::Core. For example:

 pp_core_importlist(" ':Internal'");
    

will lead to the following use statement:

 use PDL::Core ':Internal';
    

pp_setversion

Sets your module's version. The version must be consistent between the .xs and the .pm file, and is used to ensure that your Perl's libraries do not suffer from version skew.

pp_add_exported

Adds to the export list whatever names you give it. Functions created using pp_def are automatically added to the list. This function is useful if you define any Perl functions using pp_addpm or pp_addxs that you want exported as well.

pp_export_nothing

This resets the list of exported symbols to nothing. This is probably better called "pp_export_clear", since you can add exported symbols after calling "pp_export_nothing". When called just before calling pp_done, this ensures that your module does not export anything, for example, if you only want programmers to use your functions as methods.