foo2hiperc-wrapper - Convert Postscript into a HIPERC printer
stream
foo2hiperc-wrapper [options] [ps-file]
foo2hiperc-wrapper is a Foomatic compatible printer wrapper
for the foo2hiperc printer driver. This script reads a Postscript
ps-file or standard input and converts it to the Oki HIPERC printer
format for driving the Oki C310dn, C3100, C3200, C3300n, C3400n, C5100n,
C5500n, C5600n and the C5800n HIPERC printers.
This script can be used in a standalone fashion, but is intended
to be called from a printer spooler system which uses the Foomatic printer
database.
These are the options used to select the parameters of a print job
that are usually controlled on a per job basis.
- -c
- Print in color (else monochrome).
- -C colormode
- Color correction mode [0].
| 10 |
ICM color profile (using -G *.icm file) |
- -d duplex
- Duplex code to send to printer [1].
| 1 |
off |
2 |
long edge |
3 |
short edge |
- -m media
- Media code to send to printer [0].
| Media |
HIPERC |
| plain |
0 |
| labels |
1 |
| transparency |
2 |
- -p paper
- Paper size code to send to printer [2].
| 1 |
A4 |
2 |
letter |
| 3 |
legal |
- |
- |
| 5 |
A5 |
6 |
B5jis |
| 7 |
A6 |
8 |
env Monarch |
| 9 |
env DL |
10 |
env C5 |
| 11 |
env #10 |
12 |
executive |
| 13 |
env #9 |
14 |
legal 13.5" |
| 15 |
A3 |
16 |
tabloid/ledger |
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [600x600].
- -s source
- Source (Input Slot) code to send to printer [0].
| 0 |
auto select |
|
| 1 |
tray1 |
2 |
tray2 |
| 3 |
multi |
4 |
manual |
- -t
- Draft mode. Every other pixel is white.
- -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
- Print in N-up. Requires the psutils package.
- -o orient
- Orientation used for N-up.
| Portrait |
-op |
(normal) |
| Landscape |
-ol |
(rotated 90 degrees anticlockwise) |
| Seascape |
-os |
(rotated 90 degrees clockwise) |
These are the options used to customize the operation of
foo2hiperc for a particular printer.
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left
corner, in pixels [varies with paper size].
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right
corner, in pixels [varies with paper size].
- -L mask
- Send the logical clipping values from -u/-l in the HIPERC stream.
foo2hiperc-wrapper always runs Ghostscript with the ideal page
dimensions, so that the scale of the image is correct, regardless whether
or not the printer has unprintable regions. This option is used to move
the position of the clipped image back to where it belongs on the page.
The default is to send the amount which was clipped by -u and -l, and
should be good in most cases.
| 0 |
don't send any logical clipping amounts |
| 1 |
only send Y clipping amount |
| 2 |
only send X clipping amount |
| 3 |
send both X and Y clipping amounts |
- -z model
- Model is 0 for non-A3 sized printers, and 1 for A3/Tabloid/Ledger sized
printers (i.e. C810, etc.). The default is 0.
- -Z compressed
- Use uncompressed (0) or compressed (1) JBIG data.
These are the options used to control the quality of color output.
Color correction is currently a WORK IN PROGRESS.
- -g gsopts
- Additional options to pass to Ghostscript, such as
-g“-dDITHERPPI=nnn”, etc. This option may appear more than
once.
- -G profile.icm
- Convert profile.icm to a Postscript color rendering dictionary
(CRD) using foo2zjs-icc2ps and adjust the printer colors by using
the Postscript setcolorrendering operator. (WORK IN PROGRESS).
- -G gamma-file.ps
- Prepend gamma-file.ps to the Postscript input to perform color
correction using the setcolortransfer Postscript operator. For
example, the file might contain:
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
- -I intent
- Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric,
2=Saturation, 3=Absolute. Default is 0 (perceptual).
These options are used for debugging foo2hiperc and its
wrapper.
- -S plane
- Output just a single color plane from a color print and print it on the
black plane. The default is to output all color planes.
| 1 |
Cyan |
| 2 |
Magenta |
| 3 |
Yellow |
| 4 |
Black |
- -D level
- Set Debug level [0].
Create a monochrome HIPERC stream from a Postscript document,
examine it, and then print it using nc(1) or netcat(1):
foo2hiperc-wrapper testpage.ps > testpage.hc
hipercdecode < testpage.hc
nc 192.168.1.NNN 9100 < testpage.hc
Create a color HIPERC stream from a Postscript document:
foo2hiperc-wrapper -c testpage.ps > testpage.hc
/usr/bin/foo2hiperc-wrapper
Rick Richardson <rick.richardson@comcast.net>
http://foo2hiperc.rkkda.com/