DOKK / manpages / debian 11 / printer-driver-foo2zjs-common / foo2qpdl.1.en
foo2qpdl(1) General Commands Manual foo2qpdl(1)

foo2qpdl - Convert Ghostscript pbmraw or bitcmyk format into a QPDL printer stream

foo2qpdl [options] <pbmraw-file >qpdl-file

foo2qpdl [options] <bitcmyk-file >qpdl-file

foo2qpdl [options] <pksmraw-file >qpdl-file

foo2qpdl converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or color QPDL streams, for driving the Samsung CLP-300, CLX-2160, CLP-600, CLX-3160, CLP-610 CLP-620, CLP-360, CLP-365, and the Xerox Phaser 6110 QPDL printers.

These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

Force color mode if autodetect doesn't work.
Duplex code to send to printer [1].
1 off 2 long edge 3 short edge
Set page dimensions in pixels [10200x6600].
Media code to send to printer [0].
Media QPDL
plain 0
thick 1
thin 2
bond 3
color 4
card 5
labels 6
envelope 7
preprinted 8
cotton 9
recycled 10
transparency 11
archive 12
Paper code to send to printer [0].
0 letter 1 legal
2 A4 3 executive
6 env #10 7 env Monarch
8 env C5 9 env DL
11 B5jis 12 B5iso
16 A5 17 A6
23 env C6 24 folio
25 env 6.75 26 env #9
28 oficio 21 custom
Number of copies [1].
Set device resolution in pixels/inch [1200x600].
Source (InputSlot) code to send to printer [255].
1 auto 2 manual
3 multi 4 tray1
Draft mode. Every other pixel is white.
Filename string to send to printer.
Username string to send to printer.

These are the options used to customize the operation of foo2qpdl for a particular printer.

Color Adjust: brightness, contrast, saturation, cyan-red balance, magenta-green balance, and yellow-blue balance from 0 to 100. The default is 50,50,50,50,50,50. This only works when the -z3 (e.g. CLP-365) model is set!
Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
Send logical clipping amounts implied by -u/-l in the QPDL stream [3].
0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts
AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
Printer model. Model 0 is the default.
model Description
0 CLP-300, CLX-2160, CLX-3160
1 CLP-600
2 CLP-310, CLP-315, CLP-610, CLX-3175
3 CLP-620, CLP-360, CLP-365

These options are used for debugging foo2qpdl.

Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes.
1 Cyan
2 Magenta
3 Yellow
4 Black
Set Debug level [0].

Create a black and white QPDL stream:

gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE  


    -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw  


    -sOutputFile=- - < testpage.ps  
| foo2qpdl -r1200x600 -g10200x6600 -p0 >testpage.zm

Create a color QPDL stream:

gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE  


    -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk  


    -sOutputFile=- - < testpage.ps  
| foo2qpdl -r1200x600 -g10200x6600 -p0 >testpage.zc

/usr/bin/foo2qpdl

foo2qpdl-wrapper(1), qpdldecode(1)

Rick Richardson <rick.richardson@comcast.com>
http://foo2qpdl.rkkda.com/

Mon May 25 20:15:31 2020 foo2qpdl 0.0