-p tracer
Specify a tracer. Tracers usually do more than just trace
an event. Common tracers are:
function,
function_graph,
preemptirqsoff,
irqsoff,
preemptoff and
wakeup. A
tracer must be supported by the running kernel. To see a list of available
tracers, see
trace-cmd-list(1).
-e event
Specify an event to trace. Various static trace points
have been added to the Linux kernel. They are grouped by subsystem where you
can enable all events of a given subsystem or specify specific events to be
enabled. The
event is of the format "subsystem:event-name".
You can also just specify the subsystem without the
:event-name or the
event-name without the "subsystem:". Using "-e
sched_switch" will enable the "sched_switch" event where as,
"-e sched" will enable all events under the "sched"
subsystem.
The 'event' can also contain glob expressions. That is, "*stat*" will
select all events (or subsystems) that have the characters "stat" in their
names.
The keyword 'all' can be used to enable all events.
-T
Enable a stacktrace on each event. For example:
<idle>-0 [003] 58549.289091: sched_switch: kworker/0:1:0 [120] R ==> trace-cmd:2603 [120]
<idle>-0 [003] 58549.289092: kernel_stack: <stack trace>
=> schedule (ffffffff814b260e)
=> cpu_idle (ffffffff8100a38c)
=> start_secondary (ffffffff814ab828)
--func-stack
Enable a stack trace on all functions. Note this is only
applicable for the "function" plugin tracer, and will only take
effect if the -l option is used and succeeds in limiting functions. If the
function tracer is not filtered, and the stack trace is enabled, you can live
lock the machine.
-f filter
Specify a filter for the previous event. This must come
after a -e. This will filter what events get recorded based on the
content of the event. Filtering is passed to the kernel directly so what
filtering is allowed may depend on what version of the kernel you have.
Basically, it will let you use C notation to check if an event should be
processed or not.
==, >=, <=, >, <, &, |, && and ||
The above are usually safe to use to compare fields.
-R trigger
Specify a trigger for the previous event. This must come
after a
-e. This will add a given trigger to the given event. To only
enable the trigger and not the event itself, then place the event after the
-v option.
See Documentation/trace/events.txt in the Linux kernel source for more
information on triggers.
-v
This will negate options specified after it on the
command line. It affects:
-e: Causes all specified events to not be traced. This is useful for
selecting a subsystem to be traced but to leave out various events.
For example: "-e sched -v -e "*stat*"" will enable all events in
the sched subsystem except those that have "stat" in their names.
-B: Deletes the specified ftrace instance. There must be no
configuration options related to this instance in the command line.
For example: "-v -B bar -B foo" will delete instance bar and create
a new instance foo.
Note: the -v option was taken from the way grep(1) inverts the following
matches.
-P pid
This will filter only the specified process IDs. Using
-P will let you trace only events that are caused by the process.
-c
Used -P to trace the process' children too (if
kernel supports it).
--user
Execute the specified command as given user.
-C clock
Set the trace clock to "clock".
-l function-name
This will limit the function and
function_graph tracers to only trace the given function name. More than
one -l may be specified on the command line to trace more than one
function. The limited use of glob expressions are also allowed. These are
match* to only filter functions that start with match.
*match to only filter functions that end with match.
*match\* to only filter on functions that contain match.
-g function-name
This option is for the function_graph plugin. It will
graph the given function. That is, it will only trace the function and all
functions that it calls. You can have more than one -g on the command
line.
-n function-name
This has the opposite effect of -l. The function
given with the -n option will not be traced. This takes precedence,
that is, if you include the same function for both -n and -l, it
will not be traced.
-d
Some tracer plugins enable the function tracer by
default. Like the latency tracers. This option prevents the function tracer
from being enabled at start up.
-D
The option
-d will try to use the function-trace
option to disable the function tracer (if available), otherwise it defaults to
the proc file: /proc/sys/kernel/ftrace_enabled, but will not touch it if the
function-trace option is available. The
-D option will disable both the
ftrace_enabled proc file as well as the function-trace option if it exists.
Note, this disable function tracing for all users, which includes users
outside of ftrace tracers (stack_tracer, perf, etc).
-O option
Ftrace has various options that can be enabled or
disabled. This allows you to set them. Appending the text no to an
option disables it. For example: "-O nograph-time" will disable the
"graph-time" Ftrace option.
-b size
This sets the ring buffer size to size kilobytes.
Because the Ftrace ring buffer is per CPU, this size is the size of each per
CPU ring buffer inside the kernel. Using "-b 10000" on a machine
with 4 CPUs will make Ftrace have a total buffer size of 40 Megs.
-B buffer-name
If the kernel supports multiple buffers, this will add a
buffer with the given name. If the buffer name already exists, that buffer is
just reset.
After a buffer name is stated, all events added after that will be
associated with that buffer. If no buffer is specified, or an event
is specified before a buffer name, it will be associated with the
main (toplevel) buffer.
trace-cmd set -e sched -B block -e block -B time -e timer sleep 1
The above is will enable all sched events in the main buffer. It will
then create a 'block' buffer instance and enable all block events within
that buffer. A 'time' buffer instance is created and all timer events
will be enabled for that event.
-m size
The max size in kilobytes that a per cpu buffer should
be. Note, due to rounding to page size, the number may not be totally correct.
Also, this is performed by switching between two buffers that are half the
given size thus the output may not be of the given size even if much more was
written.
Use this to prevent running out of diskspace for long runs.
-M cpumask
Set the cpumask for to trace. It only affects the last
buffer instance given. If supplied before any buffer instance, then it affects
the main buffer. The value supplied must be a hex number.
trace-cmd set -p function -M c -B events13 -e all -M 5
If the -M is left out, then the mask stays the same. To enable all
CPUs, pass in a value of '-1'.
-i
By default, if an event is listed that trace-cmd does not
find, it will exit with an error. This option will just ignore events that are
listed on the command line but are not found on the system.
-q | --quiet
Suppresses normal output, except for errors.
--max-graph-depth depth
Set the maximum depth the function_graph tracer will
trace into a function. A value of one will only show where userspace enters
the kernel but not any functions called in the kernel. The default is zero,
which means no limit.
--cmdlines-size size
Set the number of entries the kernel tracing file
"saved_cmdlines" can contain. This file is a circular buffer which
stores the mapping between cmdlines and PIDs. If full, it leads to unresolved
cmdlines ("<...>") within the trace. The kernel default value
is 128.
--module module
Filter a module’s name in function tracing. It is
equivalent to adding
:mod:module after all other functions being
filtered. If no other function filter is listed, then all modules functions
will be filtered in the filter.
'--module snd' is equivalent to '-l :mod:snd'
'--module snd -l "*jack*"' is equivalent to '-l "*jack*:mod:snd"'
'--module snd -n "*"' is equivalent to '-n :mod:snd'
--stderr
Have output go to stderr instead of stdout, but the
output of the command executed will not be changed. This is useful if you want
to monitor the output of the command being executed, but not see the output
from trace-cmd.
--fork
If a command is listed, then trace-cmd will wait for that
command to finish, unless the --fork option is specified. Then it will
fork the command and return immediately.