ao-rawload - flash a program to a AltOS device
ao-rawload [-T tty-device] [--tty tty-device]
[-D altos-device] [--device altos-device] file.ihx
ao-rawload loads the specified .ihx file, without
modification, into the target device flash or ram (depending on the base
address of the .ihx file).
- -T tty-device | --tty
tty-device
- This selects which tty device the debugger uses to communicate with the
target device. The special name 'BITBANG' directs ao-dbg to use the cp2103
connection, otherwise this should be a usb serial port connected to a
suitable cc1111 debug node.
- -D AltOS-device | --device
AltOS-device
- Search for a connected device. This requires an argument of one of the
following forms:
- TeleMetrum:2
TeleMetrum
2
- Leaving out the product name will cause the tool to select a suitable
product, leaving out the serial number will cause the tool to match one of
the available devices.
- -r | --run
- After the file has been loaded, set the PC to the base address of the
image and resume execution there. the .ihx file.
ao-rawload reads the specified .ihx file into memory. It
then connects to the specified target device and writes the program to the
target device memory and, optionally, starts the program executing.