ARV-TOOL-0.8(1) | User Commands | ARV-TOOL-0.8(1) |
arv-tool-0.8 - manual page for arv-tool-0.8 0.8.23
Small utility for basic control of a Genicam device.
-n, --name=<pattern>
-a, --address=<device_address>
-d, --debug={<category>[:<level>][,...]|help}
Command may be one of the following possibilities:
If no command is given, this utility will list all the available devices. For the control command, direct access to device registers is provided using a R[address] syntax in place of a feature name.
arv-tool-0.8 control Width=128 Height=128 Gain R[0x10000]=0x10 arv-tool-0.8 features arv-tool-0.8 description Width Height arv-tool-0.8 network mode=PersistentIP arv-tool-0.8 network ip=192.168.0.1 mask=255.255.255.0 gateway=192.168.0.254 arv-tool-0.8 -n Basler-210ab4 genicam
décembre 2022 | arv-tool-0.8 0.8.23 |